Page 2 - TO THE OWNER; INFORMATION TO THE USER; CAUTION
2 As the owner of a new Multimedia Projector, you are probably eager to try out your new projector. Before you do,we suggest that your spend a little time reading this manual to familiarize yourself with the operating procedures sothat you will receive maximum satisfaction from the many features inc...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read beforethe product is operated. Read all of the instructions given here and retain them for lateruse. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcl...
Page 4 - TABLE OF CONTENTS
4 TABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation....
Page 5 - FEATURES AND DESIGN
5 FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease ofuse. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystaldisplay (LCD) technology. ◆ Compatibility This p...
Page 6 - PREPARATION; NAME OF EACH PART OF THE PROJECTOR; BOTTOM OF THE CABINET
6 PREPARATION NAME OF EACH PART OF THE PROJECTOR These Air Intake Ventsshould not be blocked. BOTTOM OF THE CABINET BACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot.When using or installing the projector,following attention should be taken. ● Do not put a f...
Page 7 - SETTING-UP THE PROJECTOR; POSITIONING THE PROJECTOR; ROOM LIGHT
7 PREPARATION ADJUSTABLE FEET Picture tilt and projection angle can be adjusted byrotating the ADJUSTABLE FEET. Projection angle canbe adjusted to 10 degrees. Lift the front of the projector and pull the FEET LOCKLATCHES on both sides of the projector. 1 ADJUSTABLE FEET SETTING-UP THE PROJECTOR F E ...
Page 8 - VENTILATION; CONNECTING THE AC POWER CORD
8 PREPARATION ● Do not cover the vent slot. ● Keep the rear grill at least 3 feet (1m) away from anyobject. ● Keep sides clear of any obstructions. Obstructionsmay block cooling air. This projector is equipped with cooling fans for protection from overheating. Pay attention to the following toensure...
Page 9 - CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR; MOVING THE PROJECTOR
9 PREPARATION CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When transporting the projector, use a carrying case recommended by Canon. ● Do not transport the projector by using a courier or transport service in ...
Page 10 - CONNECTING THE PROJECTOR; TERMINALS OF THE PROJECTOR
10 CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR S-VIDEO R-AUDIO-L (MONO) VIDEO AUDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output tothis terminal. (Refer to P12, 13.) When controlling the computerwith the Remote Control of thisprojector, connect the mouseport of you...
Page 11 - CONNECTING TO THE VIDEO EQUIPMENT
S-VIDEO R-AUDIO-L (MONO) VIDEO AUDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT 11 CONNECTING THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker(stereo) External Audio Equ...
Page 12 - CONNECTING TO THE COMPUTER
12 CONNECTING THE PROJECTOR ON 1 2 3 4 5 6 DIP CONNECTING TO THE COMPUTER To connect to the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier ...
Page 14 - BEFORE OPERATION; OPERATION OF THE REMOTE CONTROL; LASER POINTER FUNCTION
14 BEFORE OPERATION OPERATION OF THE REMOTE CONTROL VOLUME POWER FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYSTONE NO SHOW FREEZE AUTO IMAGE NORMAL PAGE Used to select source eitherCOMPUTER or MCI mode.(P23) U s e d t o s e l e c t V I D E Osource. (P30) U s e d t o e x e c u t e t h e ...
Page 15 - REMOTE CONTROL BATTERY INSTALLATION; Operating Range
15 BEFORE OPERATION VOLUME POWER FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYSTONE NO SHOW FREEZE AUTO IMAGE NORMAL PAGE To insure safe operation, please observe the following precautions : ● Use (2) AA type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a ne...
Page 16 - TOP CONTROLS AND INDICATORS
POWER N O R M A L M E N U M O D E AU TO I M AG E FOCUS ZOOM VO L U M E PAG E LAMP REPLACE WARNING TEMP. READY L A M P WIDE TELE SELECT BRIGHT 16 BEFORE OPERATION TOP CONTROLS AND INDICATORS Used to open or close theMENU operation. (P17, 19) MENU BUTTON AUTO IMAGE BUTTON READY INDICATOR POWER ON–OFF ...
Page 17 - OPERATING ON-SCREEN MENU
17 SELECT BEFORE OPERATION HOW TO OPERATE ON-SCREEN MENU FLOW OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU(MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. Thedialog box of the ITEM appears. Move the POINTER (red frame) t...
Page 19 - BASIC OPERATION
19 BASIC OPERATION VIEW MENU Used to display, reador write the image datain a memory cardthrough the PC CARDSLOT.(Refer to P34, 35) MODE MENU Used to selectthe MCI inputmode.(Refer to P33) MENU BAR IN MCI MODE Press MENU BUTTON while in MCI mode. These icons have the samefunction as the Computer Mod...
Page 20 - BASIC OPERATIONS; TURNING ON THE PROJECTOR; TURNING ON / OFF THE PROJECTOR
20 BASIC OPERATIONS TURNING ON THE PROJECTOR Connect the projector's AC power cord into a wall outlet. TheLAMP indicator lights RED, and the READY indicator lightsGREEN. Press the power ON-OFF button on the Remote Control Unit oron the Top Control to ON. The LAMP POWER indicator dims,and the Cooling...
Page 21 - ADJUSTING THE IMAGE; ZOOM ADJUSTMENT
21 BASIC OPERATION ADJUSTING THE IMAGE The message disappears after 4 seconds. The message disappears after 4 seconds. ZOOM ADJUSTMENT 1 Press the ZOOM WIDE/TELE buttons on the Top Control or theZOOM ▲ / ▼ button on the Remote Control Unit to turn into the ZOOM mode. 2 Press the ZOOM WIDE button or ...
Page 22 - SOUND ADJUSTMENT
22 BASIC OPERATION It indicates the level of the volume. Press the MUTE button to setthe Mute function On or Off. The display disappears after 4 seconds. The message disappears after 4 seconds. No show Slide the BRIGHT SWITCH to the BRIGHTER position to enhancethe picture brightness. When the BRIGHT...
Page 23 - COMPUTER MODE; SELECTING COMPUTER MODE; DIRECT OPERATION; SELECTING COMPUTER SYSTEM; AUTOMATIC MULTISCANNING SYSTEM; SELECT COMPUTER SYSTEM MANUALLY
23 COMPUTER / MCI button Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE DIRECT OPERATION Select COMPUTER mode by pressing the MODE button on the TopControl or the COMPU...
Page 24 - PC ADJUSTMENT
24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed.However, some computers employ the special signal formats which are different from the standard ones andmay not be tuned by Multiscanning of this projector. ...
Page 27 - PICTURE IMAGE ADJUSTMENT; ADJUST PICTURE IMAGE MANUALLY; NORMAL FUNCTION
27 COMPUTER MODE PICTURE IMAGE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectIMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon willappear....
Page 28 - PICTURE POSITION ADJUSTMENT
28 COMPUTER MODE The Auto Image function is provided to automatically adjust Finesync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectAUTO IMAGE and press the SELECT button. Another dialog box...
Page 29 - PICTURE SCREEN ADJUSTMENT
29 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSCREEN and press the SELECT button. Another d...
Page 30 - VIDEO MODE; SELECTING VIDEO MODE; SELECTING COLOR SYSTEM
30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE DIRECT OPERATION Select VIDEO mode by pressing the MODE button on the TopControl or the VIDEO button on the Remote Control Unit...
Page 31 - ADJUSTING THE PICTURE IMAGE
31 Each of the keys operates as follow. VIDEO MODE PICTURE IMAGE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectIMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN butto...
Page 32 - MCI MODE; OPERATING THE PC CARD SLOT; M C I; HOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR
32 MCI MODE OPERATING THE PC CARD SLOT This projector has a PC CARD SLOT and the data in a memory card (Compact Flash™ Card with PCMCIAAdapter or PC card) can be displayed just by inserting the card into it. It is unnecessary to connect with otherinput equipment. Media Card Imager (supplied with CD-...
Page 33 - SELECTING MCI MODE; Media Card Imager
33 MCI MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button. SELECTING MCI MODE DIRECT OPERATION Select MCI mode by pressing the MODE button on the Top Controlor the COMPUTER / MCI button on the Remote Control Uni...
Page 34 - SHOW THE DATA IN THE MEMORY CARD; INDEX SELECTION
34 MCI MODE Move the arrow toeach operation andpress the SELECTbutton. SHOW THE DATA IN THE MEMORY CARD BASIC OPERATION Pages in the Index Index Select the Index ● This projector can project only image data in Bit Map or in JPEG format or the data edited by Media Card Imager(supplied) through the PC...
Page 35 - WRITE DATA INTO THE MEMORY CARD; ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR
35 MCI MODE WRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR If your computer doesn't have the PC card writing equipment, the data can be written or read by connectingwith this projector.NOTE : This operation can be made only by Media Card Imager in the Personal Comput...
Page 36 - ADJUST THE PICTURE IMAGE MANUALLY
36 T h e p o s i t i o n o f t h e i m a g e c a n b e a d j u s t e d v e r t i c a l l y a n d h o r i z o n t a l l y t h r o u g h P I C T U R E P O S I T I O NADJUSTMENT. MCI MODE PICTURE IMAGE ADJUSTMENT ADJUST THE PICTURE IMAGE MANUALLY The normal picture level is preset on this projector at ...
Page 38 - CF CARD AND PCMCIA ADAPTER; IMPORTANT NOTE; Inserting / Removing the CF Card
38 MCI MODE CF CARD AND PCMCIA ADAPTER IMPORTANT NOTE Data stored on a CF card may be damaged or lost due to physical damage to the CF card or accidentalerasure. It is recommended that any important data should be copied as a backup onto separate media,such as a floppy disk, a hard disk or a MO disk...
Page 39 - Handling CF Card and PCMCIA Adapter
39 MCI MODE ● Do not turn the LCD projector or the computer power off or remove the CF card / PCMCIA adapter whilethe CF card is in access operation (storing, reading or deleting files). ● CF cards / PCMCIA adapters are high-precision electronic devices. do not bend, drop, apply strong forcesor shoc...
Page 40 - SETTING; SETTING MENU
40 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to the item that ...
Page 41 - APPENDIX; OPERATING WIRELESS MOUSE; INSTALLATION
41 APPENDIX OPERATING WIRELESS MOUSE INSTALLATION The Wireless Remote Control Unit is not only able to operate the projector but also can be used as a wirelessmouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wirelessmouse operation.The wireless mouse is...
Page 42 - MAINTENANCE; TEMPERATURE WARNING INDICATOR
42 APPENDIX CLEANING THE PROJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you are not using the projector, replace the lens cover. 1 3 L...
Page 43 - ORDER REPLACEMENT LAMP
43 APPENDIX LAMP REPLACEMENT INDICATOR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights red.When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp isrequired. Turn off the projector and disconnect the AC plug...
Page 44 - TROUBLESHOOTING; Try these Solution
44 APPENDIX TROUBLESHOOTING Before calling your dealer or service station for assistance, check the items below once again. 1. Make sure you have connected the projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable connection. Veri...
Page 46 - TECHNICAL SPECIFICATIONS
46 APPENDIX 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICATIONS Multi-media Projector 9.48 lbs (4.3 kg) 9.45" x 3.66" x 13.23" (240mm x 93mm x 336mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL...
Page 48 - PRINTED IN JAPAN
1AA6P1P2169-- (MB6S) CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. NEW YORK OFFICEOne Canon Plaza, Lake Success, NY 11042-1198, U.S.A.phone : 516-328-5960 CANON U.S.A., INC. LOS ANGELES OFFICE15955 Alton Parkway, irvine, CA 92718-3616, U.S.A.phone : 949-753-...
