Canon IVF8511GC - Manual

Canon IVF8511GC

Canon IVF8511GC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

HYAZ

TM

Inkjet Media

Disclaimer:

We have tested our media in various personal inkjet printers with good results. The user of this paper/film must determine

the suitability of this product before beginning production, using his equipment and method of application. The sellers and manufactures
maximum obligation shall be to replace paper/film that has been found to be defective. Neither the manufacturer nor the seller shall be
held liable for any injury, direct or consequential, arising out of the use of, or inability to use this paper/film.

1) Copy/Print on to the coated side of the media using
compatible Inkjet Printer.
2) To prevent a paper jam, make sure the vinyl is not bent or
warped or corners folded BEFORE loading. Loading by
hand ONE SHEET at the time (pressing FF/Ready) is a way
to make sure it loads correctly.
3) When gluing a vinyl label to any surface, clean the
surface and remove residual grease, soot or dust.
4) It is not recommended (on larger labels like 11” X 17”)
to remove all the back paper before installing. It’s better to
remove the paper from a small area at one end first such as a
1/2” vertical strip at the left hand or right hand edge.
5) Line up your label. When the position looks correct, let
the label make contact with the surface on the edge where
you removed the back paper.
6) Now bend the label back and carefully remove the rest of
the protective back paper, and glue the label down working
from the end you glued first. Then work your way towards
the other end holding that end away from the surface. You
can use your finger or a sponge and only press down (glue)
a small area each time to prevent trapping air bubbles. Do

Printing and Application Instructions

Item #

IVF8511GC 10 sheets pack

Media

Self Adhesive Vinyl

Media Type

Inkjet

Color

Clear / Transparent

Printers

Most Desk Top

Type of Adhesive

Permanent.

HPS PO Box 855

Rhome TX 76078-0855

E-mail: [email protected]

CANON 600

SERIES

Media Choice:

High Res. Paper

Print Quality:

Photographic

Print

Normal Resolu-

tion

CANON 4000

SERIES

Media Choice:

High Res. Paper

Quality: Photo-

graphic Resolu-

tion:: Standard

EPSON PHOTO

EX

& PHOTO 700

Media Type: 360

dpi Ink Jet Paper

Print Quality:

Photo

EPSON 400, 600,

700, 800, 1520,

3000, 5000 SE-

RIES

& STYLUS

PHOTO

Media Type: 360

dpi Ink Jet Paper

Print Quality:

Photo

EPSON 400, 600,

700, 800, 1520,

3000, 5000 SE-

RIES

& STYLUS

PHOTO

Media Type: 360

dpi Ink Jet Paper

Print Quality:

Photo

HEWLETT

PACKARD 600,

700, 800, 1000 &

PHOTOSMART

PRINTERS

Media Type:

Premium Ink Jet

Paper

Print Quality:

Normal

Printer Settings

If your printer is not listed here then select transparency and normal resolution.

For complete updated list of our media and to order on line go to

www.papilio.com or call 817-489-5249

General:

If you are working with 4.25” x 11” v inyl you can try remov ing all the backing material and then use the

technique described above.

NOTE:

If using self adhesiv e media, note that any adhesiv e may become difficult to remov e over time. If you want

to use self adhesiv e media on automobiles or other items where you don’t want the label to become permanent or
difficult to remov e after long time, then we recommend our selection of media with remov able adhesiv e

not use excessive pressure when working the label in this
way because you may smudge the ink.
7)

If the label is used outdoors you must use clear spray

and overlaminate

. The Overlaminate must be applied in

such way that it prevents water from contacting the label.
Clear enamel spray is available in most hardware or
automotive parts stores.
You can spray the label before you apply it (after printing)
to prevent over spray. Fixative spray is available in most
craft stores or you can use clear spray sold in most
automotive parts stores.

Use our WOL overlaminate together

with the spray.

Using clear spray as the only protection will

offer limited water proofing.

To extend UV resistant of Inkjet media HPS offers overlaminate

with built in UV barrier.

Clear Matte Vinyl

HY Z

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Canon Models