Canon iPF 655- User Manual

5 Setup Guide Instructions for unpacking and setting up the printer, and for installing the printer driver Basic Guide 1 (this manual) Descriptions of basic printer operations Basic Guide 3 Printer Operations Printer Relocation / Printer Driver Installation Instructions for preparing to relocate the...

6 Documentation Conventions Symbols The following symbols are used in this document to indicate safety information and explanations of restrictions or precautions in use. Caution Indicates caution items for which operating error poses a risk of injury or damage to equipment or property. To ensure sa...

8 The Stand is provided as a standard accessory with the iPF750 and iPF755. • With the iPF650 and iPF655, the Stand is normally offered as an option, but it may be provided as a standard accessory in some sales regions. • Front A stand that holds the printer. Equipped with casters to facilitate movi...

10 Parts To recover from Sleep mode, any button can be pressed except the Power button. • Control Panel Lit when rolls are selected as the paper source. Lit when sheets are selected as the paper source. Pressing this button when rolls are loaded cuts the paper. Pressing this button when rolls are lo...

11 Parts • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Menu operations Navigate and perform menu operations on the control panel as follows. After the printer starts up, the Tab Selection screen is shown on the Display Screen . Information is organized in four tabs, and you can p...

12 Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems and affect the printing quality. • Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems. • For details o...

14 Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these areas are dirty, we recommend cleaning them in advance. ( → , If Paper is Soiled) • If any paper has been advanced that will not be used, a message is shown requesting you to remove ...

16 If you have selected ManageRemainRoll > On in the Control Panel menu, a barcode is printed on the leading edge of the roll. • If the Tab Selection screen is not displayed, press the Menu button. • Do not remove the roll before the barcode is printed. You will be unable to keep track of the amo...

17 Removing the Roll from the Printer See the following procedure for instructions on removing the Roll Holder from the roll. • ( → "Removing the Roll Holder from Rolls," User Manual) To load new paper in the printer at this point, see the following procedure. • ( → , Loading Rolls in the Pr...

18 One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time. This may cause paper jams. • Store unused paper in the original package, away from high temperature, humidity, and direct sunlight. • Paper that is wrinkled or warped may jam. If necessar...

20 If the Tab Selection screen is not displayed, press the Menu button. • 1 2 5 6 34 On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Paper tab ( ). Press the OK button. Holding the paper, push the Release Lever back and remove the sheet. Pull the Release Lever forward. ...

21 You can also use ink tanks other than M Ink Tank PFI-104M that are simply labeled " A ." • Consumables Ink Tanks Ink tanks that can be used in the printer are labeled with a white letter " J " in a black circle on the side. When purchasing ink tanks, make sure a " J " is p...

22 There may be ink around the ink supply section of ink tanks you remove. Handle ink tanks carefully during replacement. The ink may stain clothing. • We recommend using up an Ink Tank in the course of printing within six months after breaking the seal. Printing quality may be affected if you use o...

23 Replacing Ink Tanks This step is not necessary if a message requests you to replace ink tanks. Check the message on the Display Screen and press the OK button. Remove the Ink Tank at this point. • If the Tab Selection screen is not displayed, press the Menu button. • 1 23 1 2 Access the menu for ...

24 Replacing Ink Tanks If there is still ink in the Ink Tank you removed, store it with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. Put the Ink Tank in a plastic bag and seal it. • Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank...

26 Do not remove the Maintenance Cartridge except to replace it. • To prevent ink from leaking from a used Maintenance Cartridge , avoid dropping the cartridge or storing it at an angle. Otherwise, ink may leak and cause stains. • Ink adheres to the top of the Maintenance Cartridge after it has been...

27 Replacing the Maintenance Cartridge If the Tab Selection screen is not displayed, press the Menu button. • Never touch the metal contacts (a). This may damage the Maintenance Cartridge . • 1 234 1 On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Settings/Adj. tab ( )....

28 Replacing the Maintenance Cartridge Always put the used Maintenance Cartridge back in the box and store the box on a fl at surface. Otherwise, ink may leak and cause stains. • Used maintenance cartridges are heavy. Always grasp the cartridge fi rmly and keep the cartridge level during removal and...

30 There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during replacement. The ink may stain clothing. • Do not open the Printhead pouch until immediately before installation. After removing the Printhead from the pouch, install it right away. If the Print...

31 Replacing the Printhead If the Tab Selection screen is not displayed, press the Menu button. • During Printhead replacement, do not move the Carriage from the position indicated. If you accidentally move the Carriage , you will hear a warning tone, and Printhead replacement is no longer possible....

32 Replacing the Printhead Dispose of the used Printhead in accordance with local regulations. • Never touch the metal contacts of the Carriage . This may damage the printer. • 3 4 5 2 Pull the Printhead Fixer Lever forward all the way to open it completely. Pull up the Printhead Fixer Cover to open...

35 Automatic Automatic Lowest Super Low Low Standard High Highest Eject Manual Fast Standard Slow Automatic Off On Off Automatic 30 sec. Strongest Strong Standard Weak Weakest 1 min. 3 min. 5 min. 10 min. 30 min. 60 min. * * Load Paper Eject Paper Paper Details Paper Details Roll Paper Cut Sheet Off...

Numerics 2-Inch Paper Core Attachment ................................... 123-Inch Paper Core Attachment ................................... 12 c Carriage ............................................................ 9, 31, 32 d Display Screen ............................................................