Canon iP4600 - PIXMA Color Inkjet Printer- User Manual

3 1 2 3 4 5 6 (B) (A) (C) (D) 3 1 2 Install the Print Head Open the Paper Output Tray (A) and the Top Cover (B). Raise the Print Head Lock Lever (D). Firmly raise the Print Head Lock Lever until it stops. (The Print Head Lock Lever may feel heavy.) • If the Print Head Holder does not move, make sure...

5 5 6 1 2 3 4 (1) (2) (A) 4 1 2 Install the Ink Tanks Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely. Do not hold the sides of the ink tank ; ink may splash. • Do not handle the ink tanks roughly such as applying them excessi...

6 5 6 1 2 3 4 (C) 4 5 3 4 Install all the other ink tanks in the same way. Install all the ink tanks . Wait until the POWER lamp lights green (about 6 minutes) and go to the next step.The printer may make some operating noises when preparing to print. This is normal operation. • • Close the Top Cove...

7 6 1 2 3 5 4 5 Install the Software To use the printer by connecting it to a computer, software including the drivers need to be copied (installed) to the computer's hard disk. Macintosh (P.16) Windows (P.8) Quit all running applications before installation.You need to log on as the administrator (...

(A) (B) 1 2 5 1 23 If the Found New Hardware or Found New Hardware Wizard screen appears: Windows Press the ON button (A) to TURN OFF THE PRINTER. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. The setup program should run automatically. Operating noise continues for about...

9 6 1 2 3 5 4 3 4 Windows Vista Windows Vista AutoPlay screen appears, click Run Msetup4.exe . User Account Control screen appears, click Continue . If the same screen reappears in subsequent steps, click Continue . Downloaded from ManualsPrinter.com Manuals

10 6 5 7 5 Click Install . Move the cursor over items to display explanations. Installation starts. Follow any on-screen instructions to install the software. • Read the License Agreement screen carefully and click Yes . Click Easy Install . The drivers, application software, and on-screen manuals a...

11 6 1 2 3 5 4 USB 8 The USB port is located on the right side at the back of the printer. • It takes about 15 seconds for the POWER lamp to light green. When the printer is recognized by the computer, a message appears on the screen.If you cannot go to the next procedure after 10 minutes, click Hel...

12 (C) 5 10 9 Click Execute . Windows Be sure to use the supplied speciality paper (MP-101) for Automatic Print Head Alignment.MP-101 cannot be fed from the Cassette. Load it in the Rear Tray.MP-101 has the front and back sides. Load it with the whiter side facing up. ••• For details, refer to "...

13 6 1 2 3 5 4 (D) 12 11 Make sure that the pattern shown is printed, then click Next on the Print Head Alignment screen. When Print Head Alignment cannot be executed properly, the Alarm lamp will fl ash orange 11 times. In this case, refer to " When Printing Becomes Faint or Colors Are Incorrec...

14 (E) 14 13 5 For details, refer to "6 Loading Paper" on page 22. • When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (E) and click Next . Windows Click Next . It may take a while for the next screen to appear. Click Next only once. Downloaded from...

15 6 1 2 3 5 4 Serial Number * * * * * * * 16 15 17 Click Exit . Next, read " 6 Loading Paper " on page 22! When the Extended Survey Program screen appears, confirm the message. If you can agree, click Agree . If you click Do not agree , the Extended Survey Program will not be installed. (Th...

16 USB 2 3 1 4 5 Connect one end of the USB cable to the computer and the other to the printer. Make sure the printer is turned on. Double-click the Setup icon. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If the CD-ROM folder does not open automatically, double-click th...

17 6 1 2 3 5 4 5 6 7 Click Easy Install . The drivers, application software, and on-screen manuals are installed automatically. Click Install . Move the cursor over items to display explanations. If you want to select particular items to install, click Custom Install and follow the on-screen instruc...

1 9 5 10 (A) 8 When the Start Setup screen appears, click Execute . Click Restart . The Print Head Alignment screen appears after the computer has been restarted. Macintosh Load a sheet of supplied speciality paper ( MP-101 ) into the Rear Tray (A) . A l i g n t h e P r i n t H e a d For details, re...

19 6 1 2 3 5 4 (B) 11 12 Click Execute . Printing of the pattern starts. Wait until the pattern printing ends (about 7 minutes), and go to the next step. • When this screen appears, click OK . Make sure that the Output Tray Extension (B) is extended. • Downloaded from ManualsPrinter.com Manuals

20 (C) 13 14 5 For details, refer to " 6 Loading Paper " on page 22. • When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (C) and click Next . Make sure that the pattern shown is printed. Print Head Alignment is now complete. When Print Head Alignmen...

22 (A) (E) (F) (D) (C) (A) (B) (G) (H) 6 2 1 3 This section explains how to load paper in the Cassette (A) and Rear Tray (B). The Cassette (A) supports plain paper (C) only. To print Photo Paper/Hagaki (D), be sure to load it in the Rear Tray (B). Pull out the Cassette (A) and remove the Cover (E). ...

24 6 1 2 3 4 5 (K) (J) (L) (L) (L) (L) (M) 9 8 10 11 6 Printer installation is now complete! Open the Rear Tray Cover (J), and pull up the Paper Support (K). Slide the left and right Paper Guides (L) against both edges of the paper. For details on media sizes and types you can use, refer to "Loa...

25 S a f e t y P r e c a u t i o n s For proper use, read safety precautions before using the product. S a f e t y a n d E n v i r o n m e n t I n f o r m a t i o n After Installing the Printer M a n u a l s ■ G e t t i n g S t a r t e d ( t h i s m a n u a l ) Describes how to set up and use your p...

26 S o l u t i o n M e n u ■ S o l u t i o n M e n u i s a g a t e w a y t o f u n c t i o n s a n d i n f o r m a t i o n t h a t a l l o w y o u t o m a k e f u l l u s e o f t h e p r i n t e r ! Open various applications and on-screen manuals with a single click. You can start Solution Menu from...

27 U s i n g Yo u r P r i n t e r ■ Now let’s use the printer! This printer allows you to print in various ways using the printer driver and application software installed on the computer. For example, you can print borderless photos, and create your own calendar etc. easily. For detailed operating ...

2 (A) 2 1 3 4 Print Photos from a Computer In Solution Menu, click One- Click to Photo Print . Easy-PhotoPrint EX allows you to print photos easily. This section explains how to print borderless photos using 4" x 6" size Photo Paper Plus Glossy II. The screens are based on Windows Vista. Sel...

29 Specifications Minimum System Requirements Conform to the operating system’s requirements when higher than those given here. Operating System Processor RAM Windows Vista 1 GHz processor 512 MB Windows XP SP2 300 MHz processor 128 MB Windows 2000 Professional SP4 300 MHz processor 128 MB Note: Ope...

QT5-1617-V01 XXXXXXXX ©CANON INC.2008 PRINTED IN THAILAND Email Tech Support — www.canontechsupport.com The following ink tanks are compatible with this product. Getting Help from Canon This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays)...