Canon i350 - Color Bubble Jet Printer- User Manual
Canon i350 - Color Bubble Jet Printer– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – PRODUCT SPECIFICATIONS
- Page 5 – ink level detection is on, and no status monitor display when off.)
- Page 9 – TROUBLESHOOTING FLOWCHART; Normal
- Page 11 – SERVICE INFORMATION
- Page 16 – APPENDIX 1: SHIPMENT INSPECTION PATTERN 1; Print EEPROM information; Bk nozzle check pattern
- Page 17 – < How to print the shipment inspection pattern >
1
i350 / i355
i250 / i255
SIMPLIFIED MANUAL
1. PRODUCT LIST
2. PRODUCT SPECIFICATIONS
3. ERROR DISPLAY
4. SERVICE MODE (test print, EEPROM initialization, destination setting)
5. EXTERNAL VIEW / PARTS LIST
6. TROUBLESHOOTING FLOWCHART (main unit, print head)
7. SERVICE INFORMATION
APPENDIX 1: SHIPMENT INSPECTION PATTERN
APPENDIX 2: i350/i250 SERVICE TOOL
QY8-1389-000
Rev. 00
June 6, 2003
Canon Inc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 2. PRODUCT SPECIFICATIONS 2-1. Printer Main Unit Specifications Paper feeding method ASF Resolution 2,400dpi x 1,200dpi (at the highest resolution) Printing speed *Measured by new through-put pattern (LowEnd 2003) CL i350/i355: 4 ppm i250/i255: 3.5 ppm (CL through-put pattern) HQ BK 11ppm 8 ppm (B...
5 3. ERROR DIAPLAY Errors are displayed by the LEDs, and ink low warnings are displayed by the status monitor. 3-1. Operator Call Error (Orange LED blinking) LED Display Content Corrective Action Blinking 2 times Paper out Set paper, and press the RESUME button to feed the paper. Blinking 3 times Pa...
9 6. TROUBLESHOOTING FLOWCHART 6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment) < Note for normal printer refurbishment > At refurbishment, install the print head, connect the AC plug while holding down the POWER button, and after the LED lig...
