Canon i 475D- User Manual

3 2 Connecting the Printer to the Computer Use a USB cable. Recommended: Canon or other computer manufacturer cable, up to 5 meters in length. Follow the steps below to install the printer driver correctly. 1 1 1 1 Ensure that the printer and the computer are switched off. 2 2 2 2 Connect the cable....

4 3 Installing the Print Head • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord. • Never use any power supply other ...

5 5 5 5 5 Raise the lock lever. Do not touch internal parts other than the lock lever. 6 6 6 6 Remove the protective cap from the print head. 7 7 7 7 Place the print head in the holder. 8 8 8 8 Lock the print head into place by lowering the lever. Do not touch the lock lever once the print head has ...

6 „ „ „ „ Installing the Ink Tanks • For safety reasons, store ink tanks out of the reach of small children.• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands. 1 1 1 1 Take out the black ink tank. 2 2 2 2 Hold the ink tank as shown in the diagram ...

7 4 Loading Paper „ „ „ „ Loading A4 (Letter) Size Plain Paper 1 1 1 1 Open the front cover. 2 2 2 2 Move the paper thickness lever at the top of the print head holder to the left position. Close the front cover. 3 3 3 3 Pull out the paper rest and the output tray as shown. 4 4 4 4 To avoid paper ja...

8 5 Installing the Printer Driver „ „ „ „ Installing the Printer Driver – Windows 1 1 1 1 Ensure that the printer and computer are switched off. 2 2 2 2 Turn on the computer and start Windows. If any applications automatically run, quit them. Disable any virus detection programs.Do NOT turn the prin...

9 3 3 3 3 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. 4 4 4 4 Follow the instructions displayed on screen. When the screen shown on the left is displayed, click Install . 5 5 5 5 When the screen shown on the left appears, turn the printer on. If the printer is recognized,...

10 6 6 6 6 Click OK . Before you use the printer, you must carry out print head alignment on page 14. 7 7 7 7 Click Install to install the memory card utility. 8 8 8 8 Click OK . 9 9 9 9 If you want to install the application software, click Install . Follow the instructions on screen to install the...

11 „ „ „ „ Installing the Printer Driver – Macintosh 1 1 1 1 Turn on the Mac. 2 2 2 2 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. 3 3 3 3 Double-click the Mac OS X folder, and then double-click the Printer Driver folder. 4 4 4 4 Double-click i475D.mpkg . 5 5 5 5 Enter an ...

13 17 17 17 17 Select a destination to where you want to install the memory card utility, and click Continue . 18 18 18 18 Click Install . 19 19 19 19 A message asking for your confirmation to restart your computer is displayed on the screen. Read the message, then click Continue Installation . Soft...

14 6 Aligning the Print Head This operation must be carried out when using the printer for the first time. Aligning the print head positions allows you to print without shifts in the color registration. „ „ „ „ Aligning the Print Head – Windows 1 1 1 1 Click Start and select Control Panel , Printers...

15 6 6 6 6 After the pattern is printed, click Yes . If the pattern is not printed successfully, open the front cover and ensure that the ink tanks are correctly installed. 7 7 7 7 Look at the print-out. From the patterns in Column A, select the most even, least irregular pattern and enter the numbe...

16 „ „ „ „ Aligning the Print Head – Macintosh 1 1 1 1 Open the BJ Printer Utility dialog box. (1) Double-click the hard disk icon where the printer driver was installed, the Applications folder, and the Utilities folder. (2) Double-click the Print Center icon. (3) Select i475D from the Name list an...

17 5 5 5 5 In the same way, one by one, select the most even patterns printed with the least irregularities from each of Columns B to K, enter their numbers and click Send . If it is difficult to pick the best pattern on Column H, pick the setting that produces the least noticeable vertical white st...

18 „ „ „ „ Aligning the Print Head – Operation Panel 1 1 1 1 Press the Maintenance button. 2 2 2 2 Press three times to display 04 on the LCD. 3 3 3 3 Press the OK button. The pattern is printed. 4 4 4 4 Observe the printed patterns and check the pattern in which vertical stripes are least noticeabl...

19 6 6 6 6 Press the OK button. The screen for selecting a pattern in column B (“b”) appears. 7 7 7 7 Repeat the above procedure to determine the pattern numbers (+7 to –3) of the checked patterns in columns B through E and the pattern numbers (+5 to –5) of the checked patterns in columns F through ...

20 Basic Operations • If you detect smoke, unusual smells or strange noises around the printer, immediately switch the printer off and always unplug the printer. Contact your local Canon service representative. • To avoid injury, never put your hand or fingers inside the printer while it is printing...

21 „ „ „ „ Basic Print Settings For the best print quality, specify the minimum requirement settings in the Main tab. To get the best results, ensure that you select the media loaded in the printer when printing on paper other than plain paper. (1) Media Type Select the media loaded in the printer. ...

22 Printing with Macintosh Adjusting the print settings according to your needs allows you to produce better quality prints. „ „ „ „ Printing 1 1 1 1 Open the Page Setup dialog box in your application. On the File menu, click Page Setup . Check the application’s user’s manual for the actual procedur...

24 Print Head Maintenance „ „ „ „ If Blurring Occurs or If a Specific Color Does Not Print Perform print head cleaning to improve the print quality. Ensure that the printer is turned on and follow the instructions below. • Windows Open the printer driver settings screen and click the Maintenance tab...

25 Appendix Notes on Handling the USB Interface (for Windows Users) If installation of the printer driver does not proceed as instructed in this Quick Start Guide, there may be a problem with the USB driver installation.Try reinstalling the printer driver. „ „ „ „ Reinstalling If you cannot proceed ...

26 „ „ „ „ Applications Included in the CD-ROM Package Easy-PhotoPrint (Windows/Macintosh) You can make a Borderless Printing easily and quickly, just by selecting a photograph taken with a digital camera and the paper type on which to print. You can also use simple editing features such as trimming...

27 Power consumption: Standby: Approx. 3 WPrinting: Approx. 16 W Dimensions (without a paper rest and paper output tray retracted): 393 (W) X 258 (D) X 218 (H) mm15.47 (W) X 10.16 (D) X 8.58 (H) in Weight: Approx. 4.0 kg (8.82 lb.) Print Head: Black: 320 nozzles (600 dpi)Cyan, Magenta, Yellow: 256 n...

28 „ „ „ „ BJ Printer Driver Systems Requirements For Windows • Use a computer equipped on which Windows XP, Windows 2000, Windows Me, or Windows 98 can operate. • USB* interface• Available hard-disk space for printer driver installation (including temporary files) Windows XP/Windows 2000: 75MBWindo...

BUBBLE JET PRINTER Quick Start Guide Table of Contents Preface 1 Shipping Materials 1 Introduction 1 Setting Up 2 Preparing the Printer 2 Connecting the Printer to the Computer 3 Installing the Print Head 4 Loading Paper 7 Installing the Printer Driver 8 Aligning the Print Head 14 Basic Operations 2...