Page 2 - Exif Print; Canadian Radio Interference Regulations; Program
Exif Print This printer supports Exif 2.2 (also called “Exif Print”).Exif Print is a standard for enhancing the communication between digital cameras and printers. Byconnecting to an Exif Print-compliant d igital camera, the camera’s image data at the time of shooting is used and optimized, yielding...
Page 3 - Preface; Shipping Materials; Trademark Notices; • Canon
1 Preface ■■ Shipping Materials ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ Thank you for purchasing a Canon Bubble Jet Printer.Check that all the following items are in the box. If anything is missing or is damaged, contactyour Canon Authorised Dealer or Sales Representative. ❏ Printer ❏ Setup Software & ...
Page 4 - Printer Parts and Their Functions; Front View; Rear View
■■ Printer Parts and Their Functions ■■■■■■■■■■■■■■■■■■■■■ ■ Front View 2 Operation PanelFor details, refer to"Operation Panel." Card SlotUse to connect thePC card adapter. Eject ButtonPress to remove thePC card adapter. Paper Output Tray Paper GuideWhen loading paper, ensurethe left edge ju...
Page 6 - Place the printer on a flat surface.; The tape position may be changed.; Attach the paper output tray as shown.; Setting Up; Preparing the Printer; Note
4 1 Place the printer on a flat surface. 2 Remove the packing material and tapefrom the printer as shown. The tape position may be changed. 3 Attach the paper rest to the sheetfeeder. 4 Attach the paper output tray as shown. Setting Up ■■ 1 ■ Preparing the Printer ■■■■■■■■■■■■■■■■■■■■■■■■■■■ ■■ 2 ■ ...
Page 7 - Notes; from the power outlet after turning off the printer.; and turn off the computer.
Follow the steps below to install the printerdriver correctly. 1 Ensure the printer and the computerare switched off. 2 Connect the cable. 5 ➥ Notes • If your computer has an earth connection, ensure that this is attached.• If you do not intend to use the printer for a long period of time, unplug th...
Page 8 - Open the front cover.; when your hands are wet.; Installing the Print Head; Raise the print head lock lever.
6 1 Plug the printer in. 2 Turn on the printer. Do NOT turn onthe computer yet. The POWER lamp flashes and the printer beginsto operate. Wait until the POWER lamp remainsfully lit. 3 Open the front cover. ➥ Note If the front cover is opened more than tenminutes, the print head holder moves to therig...
Page 9 - • Do not touch the; Place the print head in the holder.; Installing the Ink Tanks; Take out the yellow ink tank.
7 6 Remove the protective cap from theprint head. ➥ Notes • Do not touch the print head nozzles orelectrical contacts. • Do not attempt to reattach theprotective cap once ithas been removed. 7 Place the print head in the holder. 8 Lock the print head into place bylowering the lever. Do not touch the...
Page 10 - • Do not squeeze the sides; • Only install the ink tanks in the positions; Close the front cover.; Wait until the POWER lamp remains fully lit.
8 3 Hold the ink tank as shown in thediagram and remove the protectivecap. ➥ Notes • Do not squeeze the sides of the ink tanks as thismay cause the ink to leakout and stain your clothesand hands. • Do not touch the ink port.• Do not attempt to reattach the protective cap once ithas been removed. 4 I...
Page 11 - (If you are printing with only Direct Print,; Loading Paper
9 1 Open the front cover. 2 Move the paper thickness lever at thetop of the print head holder to the leftposition. Close the front cover. ➥ Note Set the paper thickness lever to the left whenusing plain paper, to the right when usingthick paper. Refer to the User ’s Guide forinformation on loading e...
Page 12 - Installing the Printer Driver; Installing the Printer Driver - Windows
■■ 5 ■ Installing the Printer Driver ■■■■■■■■■■■■■■■■■■■■■■ ➥ Note If you are printing with only Direct Print, skip this chapter and go to “Aligning the PrintHead” on page 16. ■ Installing the Printer Driver - Windows ➥ Notes • Do not disconnect the cable or remove the CD-ROM during the installation...
Page 14 - • To view the User's Guide, please refer to; Yes; Installing the Printer Driver - Macintosh; computer or printer not operating correctly.
12 6 Click OK. Before you can use the printer, you must carry outprint head alignment on page 16. 7 Click Install to install the memory cardutility. 8 Click OK after having completed theinstallation. 9 When the screen shown on the leftappears, click Exit. ➥ Notes • To view the User's Guide, please r...
Page 15 - Wait for the installation to finish.; button. If a document needs to be; Cancel; then save the document.
1 Turn on the Mac. 2 Place the Setup Software & User’sGuide CD-ROM in the CD-ROM drive. 3 Double-click the Printer Driver folder,then select a language. 4 Double-click Installer. 5 Read the Licence Agreement and clickAccept to continue. 6 Click Install. Wait for the installation to finish. ➥ Not...
Page 16 - Double click the BJ Installer.; Click; Restart now
8 Double click Memory Card Utility ofthe CANON BJ folder. 9 Double click the BJ Installer. 10 Click . 11 Read the Software License Agreementand if you agree, click Agree and thenclick . 12 Click Install. Installation is started, and when completed, amessage for successful installation will bedisplay...
Page 17 - Select Chooser in the Apple Menu.
15 13 Select Chooser in the Apple Menu. 14 Click the icon for the printer you areusing and close Chooser. Before you use the printer, you must carry outprint head alignment on page 18. ➥ Note Refer to the User ’s Guide when using thisprinter as a network printer.
Page 18 - For Windows XP, click; Start; and select; Click the icon for your printer.; Open the File menu and select:; • Windows Me/Windows 98; to open the setting screen.; Aligning the Print Head; Aligning the Print Head - Windows
16 1 Click Start and select Printers inSettings. ➥ Note For Windows XP, click Start and select Control Panel - Printers and Other Hardware- Printers and Faxes. 2 Click the icon for your printer. 3 Open the File menu and select: • Windows Me/Windows 98 → [Properties] • Windows XP/Windows 2000 → [Prin...
Page 20 - Select Page Setup in the File menu.; Aligning the Print Head - Macintosh
18 1 Select Page Setup in the File menu. 2 Click Utilities. 3 Select Test Print from the menu andclick the Print Head Alignment icon. 4 Check that paper is loaded in theprinter and click OK. If the pattern is not printed successfully, open thefront cover and ensure that the ink tanks arecorrectly in...
Page 22 - Press the Maintenance button.; Required; Press the; Press the Print button.; Adjusting the Print Head - Operation Panel
1 Press the Maintenance button. The icon is displayed in Required Sheets . 2 Press the (right) button four times. The icon is displayed. 3 Check that A4-sized paper is set, andpress the Print button. Patterns are printed. When printing ends, the icon is displayed. 4 Examine the printed page, place a...
Page 23 - The; button, and start over from; This completes the preparations for the printer.
The icon is displayed. ➥ Note To interrupt the operation and start over,press the Cancel button, and start over from step 1. 7 Repeat steps 5 and 6, and set thepattern numbers for columns B to F. When you finish pattern number settings for upto column F, the icon appears. 8 Press the Maintenance but...
Page 24 - On the; File; Printing will start in a few moments.; Basic Operations; Printing with Windows; Printing
1 Print the document from theapplication. On the File menu, click Print . Check the application’s user ’s manual for theactual procedures. 2 Ensure your printer is selected, thenclick Properties. 3 Specify the required settings and clickOK. ➥ Note If you use anything other than plain paper,please re...
Page 25 - Basic Print Settings; Main
■ Basic Print Settings For the best print quality, specify the minimum requirement settings in the Main tab. To get the best results, ensure you select the type of media loaded in the printer when printing onpaper other than plain paper. (1) Media Type Select the type of media loaded in the printer....
Page 26 - Specify the page setup.; For details, refer to “Page Setup” on page 25.; Click the Print button.; Printing with Macintosh
24 1 Open the Page Setup dialog box inyour application. On the File menu, click Page Setup . Check the application’s user ’s manual for the actualprocedures. 2 Specify the page setup. For details, refer to “Page Setup” on page 25. 3 Open the Print dialog box in yourapplication to print the document....
Page 27 - Use the; Page Setup; dialog box to specify the paper size settings.; Print; Select; Show Balloons; in the; Help; menu for an explanation of each of the items in the
■ Page Setup Use the Page Setup dialog box to specify the paper size settings. ■ Basic Print Settings For the best print quality, specify the minimum requirement settings in the Print dialog box. To get the best results, ensure you select the type of media loaded in the printer whenprinting on paper...
Page 28 - Before Printing; Operation Panel Names and Usage; Operation Panel Names and Functions
Printing Without Using theComputer This chapter describes the procedure for using only the printer without the computer to printphotographs taken with a digital camera. ■■ 1 ■ Before Printing ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ This section describes basic operations required for printing, including how...
Page 29 - Operating the Cursor Buttons; Moving between Items; To move the; Changing a Setting
Operating the Cursor Buttons 27 Moving between Items To move the (cursor), press the (up) and (down) buttons. Changing a Setting To change the photograph number or a setting,press the (left) and (right) buttons. The (right) button increases the photograph number; the (left) button decreases the phot...
Page 30 - Using a Memory Card; This section explains how to set and remove a memory card.; Memory Card and PC Adapter; When using a memory card, note the following points:; • Compact flash (Use the PC card adapter that comes with this printer.)
■ Using a Memory Card This section explains how to set and remove a memory card. Memory Card and PC Adapter You can use the following memory cards. Set the memory card in the PC card adapter touse the card. When using a memory card, note the following points: • Some digital cameras do not support 64...
Page 31 - mark and ‘AT’* are displayed on the; • When changing/modifying the content of; Setting the Memory Card
29 1 Turn on the printer. 2 Set the memory card into the PC cardadapter. 3 Set the PC card adapter into the cardslot. The indicator lamp will go on.The mark and ‘AT’* are displayed on the operation panel. * Setup for ‘AT’ *: Images are automatically corrected when data in formatssupporting Exif2.2 (...
Page 32 - Pull out the PC card adapter.; • Except when the printer will not be used for
30 Ejecting the Memory Card ➥ Note The operation procedure is different if you are using a memory card when the printer isconnected to the computer. See the "User's Guide." 1 Check that the indicator lamp is notblinking. ➥ Note If you remove the memory card or switch offthe power to the prin...
Page 33 - Printing Photographs; Print Flow; Setting the memory card; Select a print method from the five selections.
31 Index Printing (see page 33) Prints a list of the photographs. Single Frame Printing (see page 35) Prints the selected one photograph. Specified Frame Printing (see page 37) Prints the specified photographsindividually. All Frames Printing (see page 35) Prints all photographs individually. DPOF P...
Page 34 - Setting print details; Load paper into the printer, and press the
32 ❶ ❷❸❹❺❻ ❼ 3 Setting print details ❶ Setting the Number of Print Copies (see page 40) ❷ Setting the Media Type (see page 40) ❸ Setting the Print Layout (see page 41) ❹ Setting the Print Quality (see page 42) ❺ Printing the Date (see page 42) ❻ Correcting Photographs (see page 43) ❼ Operating the C...
Page 35 - Set Media Type and Quality.; Load paper in the printer.; You will need the number of sheets indicated in; Required Sheets; Printing a Photograph List (Index Printing); when the photograph is printed.
33 1 Press the Mode button, and selectPrint Index. 2 Set Media Type and Quality. See "Print Applications" on page 40. You can also print a partial photograph index byspecifying a range. See "Specifying the range andprint the photographs" on page 34. 3 Load paper in the printer. You w...
Page 36 - Move the; First; number, the photographs; or; Print All; mode by using the; Mode; button, and then specify the range according to the procedure
34 4 Press the Print button. Printing starts. 1 Move the (cursor) to First/-Order- by pressing the (top) and (bottom) buttons. 2 Display the number of the photographto be printed first by pressing the (left) and (right) buttons. 3 Move the (cursor) to Last by pressing the (down) button. 4 Display th...
Page 37 - Set Media Type and Layout.; Load paper into the printer.; You will need the number of sheets displayed in; and; Layout; may be cut off when the photograph is printed.; Printing Photographs One at a Time (Single Frame Printing)
35 1 Press the Mode button, and selectPrint All. 2 Set Media Type and Layout. See "Print Applications" on page 40. You can specify a range to print only some of thephotographs. See "Specifying a Print Range" onpage 34. 3 Load paper into the printer. You will need the number of sheets...
Page 38 - , the same photograph is printed for; on the; Media Type; photograph may be cut off when the photograph is printed.
36 1 Press the Mode button, and selectPrint One. 2 Move the (cursor) to First/-Order- by pressing the (top) and (bottom) buttons. 3 Display the number of the photographto be printed by pressing the (left) and (right) buttons. 4 Set Media Type and Layout. See "Print Applications" on page 40. ...
Page 39 - • You will need the photograph numbers to; Media
37 ➥ Notes • You will need the photograph numbers to specify photographs to be printed. To check thephotograph numbers, use index printing. Fordetails, see "Printing a Photograph List (IndexPrinting)" on page 33. • Printing is enlarged or reduced automatically to match the paper size. Depend...
Page 40 - Last; Printing According to Camera Settings (DPOF Printing)
38 7 Display [-02-] by pressing the (right) button. [-02-] indicates the second frame. 8 To specify a frame after the secondframe, repeat step 2 to 5. If you select ---- for Last , that frame will not be printed. 9 Set Media Type and Layout. See "Print Applications" on page 40. 10 Load paper...
Page 41 - Stopping Printing; Press the Cancel button.
39 1 Press the Mode button, and selectDPOF mode. If none of the photographs have the DPOFspecification, the DPOF mode cannot be selected. 2 Set Media Type and Layout. See "Print Applications" on page 40. ➥ Note Specify the number of copies and date printingfrom the digital camera. 3 Load pap...
Page 42 - Print Applications; Setting the Number of Print Copies (Copies); Set Single Frame mode.
40 ■■ 3 ■ Print Applications ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ You can set the type of paper and layout to be used in printing, the number of print copies,photograph correction, quality, and dated printing. Set these settings after you set the printmode (Index, All Frames, Single Frame, Specified Frame,...
Page 43 - to print are left blank.
41 1 Set the print mode. See "Printing Photographs" on page 31. 2 Move the (cursor) to Media Type by pressing the (top) and (bottom) buttons. 3 Select the media type by pressing the (left) and (right) buttons. You can check the media name that correspondsto each letter on the right side of t...
Page 45 - Correcting Photographs (Image Correction); Image by pressing the
43 ➥ Note In DPOF mode, set Print Date from the digitalcamera. 1 Set the print mode. See "Printing Photographs" on page 31. 2 Move the (cursor) to Print Date by pressing the (top) and (bottom) buttons. 3 Select OFF (disable)/ON (enable) fordate printing by pressing the (left) or (right) butt...
Page 46 - The display changes to
44 1 Select ON (enable) for OptimizeImage by pressing the (left) or (right) button. To use only the correction function for colourfogginess and exposure (Photo Optimizer PROfunction) 2 Press the (right) button once. The display changes to [POP[ON]] , and only the Photo Optimizer PRO function becomes...
Page 47 - Using the Optional Image Viewer; Switching the Viewer Display On/Off; The viewer display goes off under the following conditions:
45 ■ Using the Optional Image Viewer The optional TFT Image Viewer <<IV-100>> allows you to display JPEG image data stored onthe inserted memory card and check the print layout of the first page. Switching the Viewer Display On/Off Switching the Viewer Display On After attaching the view...
Page 49 - Check that the printer power is on.; Adjusting the Brightness and Contrast
47 Adjusting the Brightness 1 Check that the printer power is on. 2 Insert a memory card to which JPEGdata has been saved (see page 29). 3 Press the Maintenance button. The icon appears in Required Sheets . 4 Press the (right) button five times. The icon is displayed. 5 Press the Print button. The i...
Page 50 - Check that the printer is on.
Adjusting the Contrast 1 Check that the printer is on. 2 Insert a memory card to which JPEGdata has been saved (see page 29). 3 Press the Maintenance button. The icon appears in Required Sheets . 4 Press the (right) button six times. The icon appears. 5 Press the Print button. The icon appears in Op...
Page 51 - Using a Digital Camera; Paper type; Turn on the digital camera.; Disconnect the cable on the printer side.
49 ■ Using a Digital Camera You can print photographs connecting a Canon digital camera which has direct printingfunction. If you connect the digital camera to the printer, perform the print operations from thedigital camera. You can use the following types of media when you connect a digital camera...
Page 52 - Maintenance Operation Flow; If ink is not properly ejected
50 ■■ 4 ■ If Photographs Cannot Be Printed Clearly (Operation Panel Section) If ink is still remaining but printing is blurred or a certain colour does not come out, nozzles inthe print head may be clogged or the print head may be out of position.Use the Maintenance function to maintain the print qu...
Page 53 - The icon; Printing the Nozzle Check Pattern
51 1 Check that the printer is on. 2 Load A4-size paper. 3 Press the Maintenance button. The icon appears in Required Sheets . 4 Press the (right) button once. The icon appears. 5 Press the Print button. Nozzle check pattern is printed. When printingends, the icon appears. 6 Press the Maintenance bu...
Page 54 - Cleaning the Print Head
52 1 Press the Maintenance button. The icon appears in Required Sheets . 2 Press the (right) button twice. The icon is displayed. 3 Press the Print button. Print head cleaning starts. When cleaning ends,the icon appears. 4 Press the Maintenance button to exitthe Maintenance mode. 5 Print the nozzle ...
Page 55 - Deep cleaning the Print Head; is
53 ■ Deep cleaning the Print Head If print head cleaning is not effective, perform print head deep cleaning, which is a strongercleaning process.Perform print head deep cleaning only when necessary because the operation consumes alot of ink. 1 Press the Maintenance button. The icon appears in Requir...
Page 56 - . An error has occurred; If an Error Is Displayed on the Operation Panel
54 Error number: 001Cause: Printer is being used.Corrective action:Printing starts when printing from the computer is completed. Press the Cancel button to stopprinting. Error number: 002Cause: Printer is not ready.Corrective action:Wait until preparations are completed. Printing will start when pre...
Page 58 - printed from the computer.
56 Error: Photograph cannot be read from memory card (indicator lamp does not go on)Cause: • Memory card is not set properly. • Memory card was ejected while data was being read. • Memory card that cannot be used was set. • Memory card does not contain readable photographs. Corrective action: • Inse...
Page 59 - Print Head Maintenance; If Blurring Occurs or If a Specific Colour Does Not Print; When the Printer Runs out of Ink; Install the new ink tank.
57 Print Head Maintenance ■ If Blurring Occurs or If a Specific Colour Does Not Print ➥ Note The steps below can be performed only from the computer. If you perform them from theoperation panel, refer to “If Photographs Cannot Be Printed Clearly” on page 50. Perform print head cleaning to improve th...
Page 60 - Notes on Handling the USB Interface (for Windows Users); Reinstalling; If you cannot proceed beyond the; Printer Port; When the Abort Installation screen is; Turn the printer off.
58 Notes on Handling the USB Interface (for Windows Users) If installation of the printer driver does not proceed as instructed in this Quick Start Guide,there may be a problem with the USB driver installation.Try reinstalling the printer driver. ■ Reinstalling If you cannot proceed beyond the Print...
Page 62 - Additional Systems Requirements for User's Guide; Specifications; Resident print control mode:
60 Additional Systems Requirements for User's Guide To install Adobe Acrobat Reader and view the User's Guide:• 8MB of available hard-disk space for Windows• 13MB of available hard-disk space for Mac OS• 640 x 480 pixels or greater, minimum 256 colours video display ■ Specifications Printing method:...
Page 63 - Sheet feeder capacity:
61 Storage environment: Temperature: 0 to 35˚C (32 to 95˚F) Humidity: 5 to 90% RH (no condensation) Power supply: Europe AC 230 V±10%, 50 Hz USA/Canada AC 120 V, 60 HzAustralia AC 240 V, 50 Hz Power consumption: Standby: 6 W Printing: 36 W Dimensions (without a paper rest and paper output tray): 430...
