Canon BJC-6000- User Manual
Canon BJC-6000– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 3: Connect The Printer To The Computer; Make sure the printer and your computer are turned off.; Connect a parallel cable to the printer.; You need to purchase a parallel cable from your dealer.; Step 4: Plug In The Printer; Plug the printer into a properly grounded AC outlet.; Never turn off the printer using a power strip.
- Page 3 – Step 5: Install The BC-31 Color BJ Cartridge; Lower the paper output tray and lift up the front cover.; The cartridge holder moves to the center of the printer.
- Page 4 – Pull up the orange tape to break the seal of the clear film.
- Page 6 – Step 6: Install The BC-30 Black BJ Cartridge; Raise the blue lock lever on the left side of the cartridge holder.; Do not attempt to replace the cap on a BJ cartridge.
- Page 7 – Remove the protective tank from inside the BJ cartridge.
- Page 8 – The printer automatically cleans the print heads.
- Page 10 – Step 8: Install The Printer Driver; Start your system in this order:; Starting Windows Printer Setup; (Click whatever you need to until you return to the Windows Desktop.); When you see the Windows Desktop, follow these bjc6000steps:; OK; Printer Setup for Windows 3.1; Starting your System; Turn on your printer, and then turn on your computer.; Run
BJC-6000 Series Setup Instructions
Step 1: Remove All Shipping Tape and Protective Materials
Note that tape may not be in the exact locations shown here.
Remove all tape and material from the front, back, and inside of the printer.
Make sure you have these items:
•
BC-31 Color BJ Cartridge
•
BC-30 Black BJ Cartridge
•
Documentation kit (User's Manual, Warranty Card, Registration Card)
•
Canon Creative Pro CD packet
•
Printer cable (not included)
Check the outside of your box for other contents.
Important!
Save the box and shipping materials. You may need them later if you have to transport the
printer.
Step 2: Select a Location for the Printer
•
Choose a flat sturdy surface with enough space around the printer to store and feed paper.
•
Avoid placing the printer in direct sunlight.
•
Fully extend the paper support and paper output tray to ensure enough space is available for proper
operation.
•
Make sure you have enough room to manually feed single sheets of paper from the back of the printer
•
Always lift the printer by gripping both sides.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Step 3: Connect The Printer To The Computer Important! Make sure the printer and your computer are turned off. 1. Connect a parallel cable to the printer. • You need to purchase a parallel cable from your dealer. • The cable must be a Centronics-compatible, bi-directional cable (IEEE 1284-compliant)...
Step 5: Install The BC-31 Color BJ Cartridge Important! Spilled ink can stain any surface. Open BJ cartridges and Ink Tanks very carefully to protect against spilled ink. 1. Lower the paper output tray and lift up the front cover. The cartridge holder moves to the center of the printer. 2. Remove th...
4. Remove the BC-31 Color BJ Cartridge from its box. Remove the orange protective cap from the print head, and then remove the orange tape. Do not attempt to replace the cap on a BJ cartridge. 5. Insert the BJ cartridge. • Set the BC-31 Color BJ cartridge into the right slot of the cartridge holder....
