Page 2 - Table of Contents
2 Table of Contents TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft C...
Page 3 - To the Owner; CAUTION; RISK OF ELECTRIC SHOCK; Safety Precaution; WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
3 To the Owner CAUTION : T O R E D U C E T H E R I S K O F E L E C T R I CSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE EXCEPT LAMP REPLACEMENT.R E F E R S E R V I C I N G T O Q U A L I F I E DSERVICE PERSONNEL. T H I S S Y M B O L I N D I C A T E S T H A T D A N G E R O U SVO...
Page 4 - Safety Instructions; Follow all warnings and instructions marked on the projector.; For Use in Netherlands
4 Safety Instructions All the safety and operating instructions should be read beforethe product is operated. Read all of the instructions given here and retain them for lateruse. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcloth for cl...
Page 5 - Installing the Projector in Proper Position; USE CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR; Moving the Projector
5 Safety Instructions Installing the Projector in Proper Position USE CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR ● Do not drop or bump the projector, otherwise damage or malfunction may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by ...
Page 6 - Compliance; AC Power Cord for the United States and Canada :; AC POWER CORD REQUIREMENT; Federal Communication Commission Notice
6 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories(UL) and certified by the Canadian ...
Page 7 - Connecting the AC Power Cord; Projector side; NOTE ON THE POWER CORD; For Continental Europe
7 Compliance Connecting the AC Power Cord To the POWER CORDCONNECTOR on theprojector. Projector side AC Outlet side Ground NOTE ON THE POWER CORD The AC Power Cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below. The proper AC power...
Page 8 - Features and Design; Computers; RGB Scart signal can be connected.; Wide Zoom Lens
8 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. Thisprojector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)technology. ◆ Compatibility T h e...
Page 9 - Part Names and Functions; Back; Bottom
9 Part Names and Functions ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;...
Page 10 - Terminal; i o
10 Part Names and Functions A built-in micro processor which controls this unit may rarely malfunctionand need to be reset. This can be done by pressing the RESET buttonwith a pen, which will shut down and restart the unit. Do not use theRESET function excessively. * AUDIO R IN L VIDEO IN DVI-I/RGB ...
Page 11 - This projector has control buttons and indicators on its top.; Top
11 Part Names and Functions INPUT WARNING LAMP REPLACE MENU POWER KEYSTONE SET VOL VOL + - This projector has control buttons and indicators on its top. Top q w r t y u i u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to anend. (p43) i WARNING indicator Lights red w...
Page 12 - Remote Control Unit
12 Part Names and Functions Remote Control Unit q wer t y u io !0 !1 !4 !5 !6 !7 !8 !9@0 !2 !3 @1 @1 RESET/ON/ALL-OFF switch When using the remote control, set this switch to “ON.” Set it to “ALL OFF” whenit is not used for energy saving. Slide this switch to the "RESET" to initialize therem...
Page 13 - Pointer Function; II; These caution labels are put on the remote control.; Laser Pointer Function
13 Part Names and Functions You can move Spotlight or Pointer of the projector with the remote control unit to emphasize a part of the projected image.(See “Pointer” on page 40 for changing the patterns and sizes.) While pressing the MENU button, hold down the NO SHOWbutton for more than 7 seconds s...
Page 14 - Wireless Mouse Operation
14 Part Names and Functions This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the otherseven codes (Code 2 to Code 8). This switching function prevents remote control unit interference when operating severalprojectors or video equipme...
Page 15 - Remote Control Batteries Installation
15 Part Names and Functions To guarantee safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the re...
Page 16 - Installation; Positioning the Projector
16 Installation Projection angle can be adjusted up to 11.9 degrees with the adjustable feet. Lift the front of the projector and pull the feet lock latches onboth sides of the projector. 1 Adjustable Feet Feet Lock Latches Release the feet lock latches to lock the adjustable feet androtate the adju...
Page 17 - Connecting to a Computer; Cables used for connection; External Audio Equipment; Terminals
17 Installation Connecting to a Computer AUDIO R IN L VIDEO IN DVI-I/RGB IN-1 SERVICE PORT S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/COMPONENT IN/ RGB OUT RESET MCI ON ON ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON OFF OFF OFF...
Page 18 - Connecting to Video Equipment; • Component-VGA Cable
18 Installation Connecting to Video Equipment AUDIO R IN L VIDEO IN DVI-I/RGB IN-1 SERVICE PORT S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/COMPONENT IN/ RGB OUT RESET MCI Video Source (example) Video Cassette Recorder Digital Camcorder S-VIDEOCable ✽ Audio Amplifier Audio Speaker (stereo) Audio...
Page 19 - Basic Operation; Turning On the Projector
19 Basic Operation Connect the projector's AC power cord into an AC outlet. ThePOWER indicator flashes red in a moment and turns on red. Press the POWER ON-OFF button on the top control or on theremote control unit. The POWER indicator turns green, and thecooling fans start to operate. The preparati...
Page 20 - Keystone Adjustment; Rotate the Focus Ring to adjust the projected picture focus.; Picture Freeze Function
20 If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment. Basic Operation • The arrows are blue when there is no correction.• The arrows disappear at the maximum correction.• The direction of the arrow being corrected turns light blue. • If you press the KEYSTONE...
Page 21 - No Show Function; Direct Operation; Volume; Sound Menu; Sound Adjustment; Menu Operation; black out
21 Basic Operation No Show Function Press the NO SHOW button on the remote control unit to black outthe image. To restore to normal, press the NO SHOW button again orpress any other button. When a projected image is captured and setas “User” in the Logo item in the Setting menu (p38), the screenchan...
Page 22 - Top Control; Remote Control
22 Basic Operation Press the MENU button to display the On-Screen Menu(Menu bar). A red frame is a pointer. Move the pointer (red frame) to the Menu icon that you wantto select by pressing the Point Left/Right button. Adjust the item data by pressing the Point Left/Right button.R e f e r t o t h e f...
Page 23 - Menu Bar; Used to adjust picture image.
23 Basic Operation Menu Bar PC System Menu Used to selectcomputer system.(p25) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Sharpness / Gamma] (p30) Setting Menu Used to changesettings of theprojector or reset lampreplace counter. (p...
Page 24 - Computer Input; RGB; Input Source Selection
24 Computer Input Choose either Computer 1 or Computer 2 by pressing the INPUTbutton on the top control or press the COMPUTER button on theremote control unit.Before using these buttons, correct input source should be selectedthrough menu operation as described below. Press the MENU button and the O...
Page 25 - Auto; PC System Menu; Computer System Selection
25 Computer Input This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustmentfunction provided in the projector. When selecting computer input, the projector automatically displays the most properimage for the input signal. One of the followin...
Page 26 - PC Adjust Menu; To store adjustment data
26 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform toyour computer. Auto PC Adjustment function can be operated as follows. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right bu...
Page 28 - Select the resolution at the Display area dialog box.
28 Computer Input Select the resolution at the Display area dialog box. Display area Adjusts the horizontal area displayed by this projector. Press thePoint Left/Right button to decrease/increase value and then press theSET button. Display area H Adjusts the vertical area displayed by this projector...
Page 29 - Normal picture level preset on this projector.; Image Level Selection; Standard
29 Computer Input Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Select Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe level that you want to set and then press the SET button. Move ...
Page 30 - Image Level Adjustment; Resets all adjustment to their previous levels.
30 Computer Input Press the Point Left/Right but-ton to adjust value. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Adjust Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe item that y...
Page 31 - Wide; Provides image to fit screen size.; Normal; button on the remote control.; Digital zoom –; Screen Size Adjustment
31 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Screen Menu icon. When the Digital zoom + is se...
Page 32 - Video Input; VIDEO
32 Video Input Choose Video by pressing the INPUT button on the top control or theVIDEO button on the remote control unit.Before using these buttons, correct input source should be selectedthrough menu operation as described below. Press the MENU button and the On-Screen Menu will appear.Press the P...
Page 34 - Component; Video System Selection
34 Video Input AV System Menu (Video or S-Video) AV System Menu (Component) Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the AV System Menu icon. Press the Point Down button to move the red arrow pointer tothe system that ...
Page 35 - IMAGE button
35 Video Input Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Select Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe level that you want to set and then press the SET button. Move the...
Page 36 - Interlace video signal can be displayed in a progressive picture.
36 Video Input Press the Point Left/Right but-ton to adjust value. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Adjust Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe item that you ...
Page 37 - Provides image at a wide screen ratio of 16 : 9.; Resets all adjustment to their previous figure.
37 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Screen Menu icon. Press the Point Down button and ...
Page 38 - Setting
38 Setting Keystone Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English,G e r m a n , F r e n c h , I t a l i a n , S p a n i s h...
Page 40 - To change the code for the projector
40 Setting This function is used to reset the lamp replace counter. Whenreplacing the projection lamp, reset the lamp replace counter byusing this function. See page 44 for operation. Lamp counter reset Remote control This projector provides eight different remote control codes (Code 1-Code 8); the ...
Page 41 - Maintenance and Cleaning; Warning Indicator; TOP CONTROL; Then check the items below.; Are the air filters clean? Clean the air filters periodically.; The projector is shut down and the WARNING indicator lights red
41 Maintenance and Cleaning The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNINGindicator and the POWER indicator to take proper maintenance. WARNING LAMP REPLACE POWER KEYSTONE OL + TOP CONTROL Warning Indicator WARNING LAMP REPLACE POWE...
Page 42 - Cleaning the Air Filters
42 Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Air FilterPull up and remove. Turn off the projector, and disconnect the AC power cord fromthe AC outlet. Turn th...
Page 43 - ORDER REPLACEMENT LAMP; Reset the Lamp replace counter.; Lamp Replacement
43 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end,the LAMP REPLACE indicator lights yellow. If this indicator lightsyellow, replace the lamp with a new one promptly. Follow these steps to replace the lamp. Lamp Lamp Cover ORDER REPLACEMENT LAMP Replac...
Page 44 - LAMP HANDLING PRECAUTIONS; Lamp Replace Counter
44 Maintenance and Cleaning Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMPREPLACE indicator stops lighting. Move the pointer to Lamp counter reseta n d t h e n p r e s s t h e S E T b u t t o n . T h emessage “Lamp replace count...
Page 45 - Appendix; Troubleshooting; and “Connecting to Video Equipment” on page17 and 18.
45 Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer" and “Connecting to Video Equipment” on page17 an...
Page 46 - The Remote Control Unit
46 This symbol on the nameplate means the product is Listed by Underwriters LaboratoriesInc. It is designed and manufactured to meet rigid U.L. safety standards against risk offire, casualty and electrical hazards. Appendix WARNING :High voltages are used to operate this projector. Do not attempt to...
Page 47 - Projector Condition; Indicators; Indicators and Projector Condition
47 Appendix Check the indicators for projector condition. • • • lights green. • • • lights red. • • • off • • • flashes green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lightsyellow, replace the projection lamp with a new on...
Page 48 - Menu Tree
48 Appendix Menu Tree System (1) MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Reset Mode free Store Quit Standard High contrast Custom Image Adjust Contrast Brightness Color Temp Red ...
Page 50 - Compatible Computer Specifications; These modes are not available on LV-5210.; RESOLUTION; RESOLUTION; MAC; RESOLUTION; RESOLUTION
50 Appendix Compatible Computer Specifications LV-7215/ LV-7210 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than140 MHz of Dot Clock. LV-5210 can basically accept the signal from all computers with the V, H-Frequency mentioned belowand less tha...
Page 51 - Technical Specifications
51 Appendix 0.8" TFT Active Matrix type, 3 panels Multi-media Projector 6.2 lbs (2.9 kg) 11.81" x 3.69" x 9.40" (300mm x 93.8mm x 238.8mm) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Adjustable f...
Page 52 - Pin Configuration; Configurations of Terminals
52 Appendix RGB IN/COMPONENT IN/RGB OUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert....
Page 53 - Optional Parts
53 Appendix Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration SERVICE PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GND ----- ----- ----- GND PS/2 Serial ADB 1 2 3 4 5 6 7 8 Vcc - Data + Data Ground 1 2 3 4 USB CONNECT...
Page 54 - Attaching the Lens Cover
54 Appendix Attaching the Lens Cover When moving this projector or when it is not used for an extendedperiod, attach the lens cover. Secure the string for the lens cover through a hole of thelens cover. 1 2 Turn the projector upside down and secure the string forlens cover to a hole on the bottom of...
Page 56 - CANON DEUTSCHLAND GmbH; Europark Fichtenhain A 10, 47807 Krefeld, Germany; CANON GmbH
1AA6P1P4081-- (MB7P) ©CANON INC. 2003YT1-1343-000 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC. 703 Waterford Way...
