Canon 350D XT - Manual
Canon 350D XT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Copyright, 2005 ExpoImaging, Inc.
“Canon” and the Canon camera models listed are Trademarks of Canon, Inc.
E x p o D i s c W h i t e a n d W a r m B a l a n c e F i l t e r s
Canon Custom WB Procedures
Canon 300D Digital Rebel and Digital Rebel 350D XT
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
4. Push
‘
MENU
’
button and select < camera icon > tab.
5. Select
‘
CUSTOM WB
’
using < down arrow >, then push the
‘
SET
’
button.
6. Push
‘
SET
’
button again to select the ExpoDisc
‘
gray frame
’
just taken.
7. Push the
‘
MENU
’
button to exit menu.
8. Push and hold the
‘
WB
’
button < down arrow > on the back of the camera
while rotating main dial on top of the camera to select the custom WB icon in the
control panel.
9. Remove the ExpoDisc, return camera to auto focus mode (if desired), and start
shooting.
Canon 10D
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
4. Push the
‘
MENU
’
button.
5. Scroll down to
‘
CUSTOM WB
’
in the menu using the thumb dial, then push the
‘
SET
’
button in the center of the thumb dial.
6. Push the
‘
SET
’
button again to select the ExpoDisc
‘
gray frame
’
just taken.
7. Push the
‘
MENU
’
button to exit menu.
8. Push and hold the
‘
AF-WB
’
button on top of the camera while rotating thumb
dial to select the custom WB icon in the control panel.
9. Remove the ExpoDisc, return camera to auto focus mode (if desired), and start
shooting.
Canon 20D
1. Install the ExpoDisc and set the camera to Manual Focus Mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
