Canon 330- User Manual
Canon 330– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Approved Vacuum systems:; fan in one window is recommended for ventilation.
- Page 3 – EMOVE; OPC D; RUM
- Page 4 – ARTRIDGE; No felt wand is used in this cartridge.; ROUBLE; be periodically cleaned with a glass cleaner.
Home
New Arrivals!
Company Info
Publications
Special Features
Contact Us
Overview
Supplies Required
Tools Required
Prepare Work Area
Disassembly
Remove the OPC Drum
Cleaning the Debris / Supply Cavity
Re-assemble the Cartridge
Trouble Shooting
Printing Theory
Recommended Supplies
Canon PC-330 (E-16, E-31) Copier Toner Cartridges
DOC -0234
O
VERVIEW
These instructions cover the recharging of the Canon E-16, and E-31 toner cartridges used in the Canon PC-310, 330, 330L,
550 and the PC-770 Copiers.
The E-16 cartridge is stamped E-16 and takes one bottle of toner(80g). The E-31 can be stamped either E-31 or E-3. In either
case they use two bottles of toner (160g).
This PC Copier engine takes a new direction for Cannon. The toner supply and waste chambers are not separated as in other
cartridges , and the cartridge basically just snaps together . This is not to imply that its a very easy cartridge, because of these
traits the opposite is true. This is also the first Canon PC Copier Cartridge that uses a PCR Charge Roller. This means that
unlike all the other Canon PC Copier Cartridges that can be re-manufactured using the same PC toner, these cartridges take a
special toner. Regular PC toner (CP Part # 9700 I, 9057 ), will not work in these cartridges , you must use our part # 9330 only.
Because of this Charge Roller technology, they also generate very little ozone, and do not need an Ozone Filter .
These copiers are designed for a very low copying volume , (from 0-500 copies/month), and should not be used for more than
that. The 300 and 500 series copiers are very small machines, and the cartridges are almost toy like in appearance. The PC-
700 series is built for heavier duty, but still uses these small cartridges .
The purpose of this disassembly procedure is to vacuum out toner that will have spilled inside the cartridge during shipping and/
or rough handling, to clean the debris cavity, and to clean and fill the supply chamber with new toner. This disassembly
procedure should also be used to examine the internal parts of the cartridge for possible damage, or wear should the printing of
the cartridge be poor and not correctable by any other means.
S
UPPLIES
R
EQUIRED
99% Isopropyl Alcohol (FR-8)
Nu-Finish car polish
Cotton Swabs (CT-100)
Recovery Blade (Optional) (RB-EX)
Lint Free Cotton Pads (PW-96)
Doctor blade (Optional) (DB-PX)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Canon 330
Summary
9330 Toner 80 Grams (2 bottles for E-31) Wiper Blade (Optional) (WB-PX) SS-PXO Sealing Strip Can clean compressed air (CA-10) DPP-K (Kynar padding powder) Rubber Cement Foil Bag (FB-1) Drum-330GM Toner Magnet Cloths (TM-40) T OOLS R EQUIRED Small Phillips head screw driver. Small Common screw driver...
If any of the tabs do break, see section 6 for possible repair methods. 3. Turn the cartridge around so that the gear is on the right side and the debris cavity is facing you. 4. There are four hidden clips along the seam of the debris cavity. With a small common screw driver, pry up along the seam ...
5. Remove the Charge Roller and clean with NU-Finish Car polish. To clean the roller , take a small amount of polish on a clean, dry, lint free cloth, and rub it into the roller . Continue to rub the roller until the roller shines. If there are any dullspots left, they should be cleaned again. 6. Cl...
