Canon 400D - Manual
Canon 400D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – . Specifications 400D
- Page 3 – . Function Controls 400D
- Page 4 – pulled out all the way
- Page 5 – Special note on responsibility for watertight integrity:; the working depth or dive down to the safe diving range.; guidance in using and maintaining the O-ring seal.
- Page 6 – Place the lid on a firm non-slip level surface.; IF THE O-RING IS DAMAGED OR SUSPECTED OF BEING DAMAGED, DISCARD IT; Once the O-ring has been inspected and verified fit for use, apply a; SMALL; amount of Silicone grease to; Mounting the camera in the housing:
- Page 7 – Screw home
- Page 8 – Before diving, make sure the pressure release plug is pushed
- Page 9 – Pre Dive Function Check.; Check housing is closed.; or a cleansing tank where the water may be heated up by the sun.; and shutter extension, and wrap the camera in foam or bubble wrap.
- Page 10 – Hydrostatic pressure test to 10 Bar.
- Page 11 – applies only to the housing itself.; 0 BAR does not accept any liability either; Underwater Housing at the address below, to validate the warranty.; Please keep this document for future reference
Camera Housing – Model 400D (Canon)
User Manual
Contents:
1
. Introduction
2
. Specifications
3
. Set up Instructions
4
. Function Controls
5
. Use & Care of Housing
6
. Service
7
. Warranty
1
. Introduction
10 BAR Underwater Housings are small, light and rugged enough to be used on every dive. Use
of clear polycarbonate allows for visual inspection of camera condition and the O-ring seal. 10 BAR
Housings are designed for the ever -increasing variety of models of digital still and video cameras.
Advanced computer aided design and CNC manufacturing technologies ensure precise dimensions. Each
housing body is first injection molded, and then machined to configure to individual camera model. A
range of lens ports and controls are fitted, to tailor the housing to your camera model.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 . Specifications 400D Test Pressure 10 Bar (300 ft.) Housings are individually tested Closure Design Air Lock Body Material Polycarbonate Overall Size 200 x 300 x 230 mm (LxWxH) Total Weight Approximately 2.6 Kg (Housing only) Buoyancy (with camera) Approximately neutral in salt water Features • V...
3 . Function Controls 400D 1. Pressure release plug 2. Display on/off 3. Menu 4. Jump 5. Playback 6. Erase 7. Viewfinder eyepiece 8. A/E Compensation 9. Drive Mode 10. AE/FE Lock 11. AF Point Selection 12. 13. 14. 15. Cross Key 16. Setting 17. Shutter 18. Main Dial 19. Mode Dail / Power on/off 20. F...
4 . Set up Instructions 4.1 Air Lock: The body and lid are designed with the Air Lock System “no clip” closure arrangement. Testing has shown that this arrangement allow the water to exert an even pressure on the O-ring, Increase the reliability of the watertight seal. 4.2 Pressure release plug To o...
