Canon 10BAR 450D- User Manual
Canon 10BAR 450D– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Flashlight syn bulkhead
- Page 4 – Special note on responsibility for watertight integrity:; to the working depth or dive down to the safe diving range.
- Page 5 – Place the lid on a firm non-slip level surface.; IF THE O-RING IS DAMAGED OR SUSPECTED OF BEING DAMAGED, DISCARD IT; Once the O-ring has been inspected and verified fit for use, apply a
- Page 6 – Mounting the flashlight in the housing; the plastic slide tray to the camera; Before diving, make sure the pressure
- Page 8 – Inspect all components for wears or damage (report if repair; Clean all sealing surfaces,; Note: Replacement of damaged components may; any equipment housed inside,; In the event of the
- Page 9 – Please keep this document for future reference; (Copy to be returned to 10 Bar Underwater Housings)
Camera Housing
–
Model 450D (Canon)
User Manual
Contents:
1. Introduction
2. Specifications
3. Function Controls
4. Set up Instructions
5. Use & Care of Housing
6. Service
7. Warranty
1. Introduction
10BAR Underwater Housings are small, light and rugged enough to be used on every dive. Use of a
clear polycarbonate allows for visual inspection of camera condition and the O-ring seal. 10BAR
Housings are designed for the ever -increasing variety of models of digital still and video cameras.
Advanced computer aided design and CNC manufacturing technologies ensure precise dimensions. Each
housing body is first injection molded, and then machined to configure to individual camera model. A
range of lens ports and controls are fitted, to tailor the housing to your camera model.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 2. Specifications 450D Test Pressure Housings are individually tested to 10 Bar (90 m / 300 ft.) Recommended working pressure 60 m. Closure Design O-ring, Air Lock Body Material Polycarbonate Overall Size 200 x 300 x 230 mm (LxWxH) Total Weight Approximately 2.6 Kg (Housing only) Buoyancy (with ca...
4 4.4 Special note on responsibility for watertight integrity: Each housing is individually inspected and hydrostatically tested in the factory. The design of the main piston O-ring seal is among the most reliable in the industry and the watertight integrity is excellent. This special O-ring design ...
5 contamination such as dust, hair, salt, sand etc. has fallen onto the O-ring or O-ring recess, as a precaution we recommend to inspect the O-ring every time the lid is opened and to carry out the maintenance if necessary. Procedure: • Place the lid on a firm non-slip level surface. • The O-ring ca...
