Bryant OM 17-101 - Manual
Bryant OM 17-101 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – See pages 3 and 5; Set the Clock and Go; Basic Operation; OFFON; Setup; ProgramOn; SuMTuWThFSa; Locked; COOL; Fan; OFF; A UTO
- Page 3 – Programming; Occupied and Unoccupied Periods; Pressing the up/down buttons in Auto mode will adjust; both; the heat; Cool modes will adjust only; or; cool set point temperature.; Select Desired Temperature
- Page 4 – Advanced Setup; Yes
- Page 5 – Advanced Setup Table; the set point plus the; unlock; Set Occupied 1 to Off; DESCRIPTION; About Advanced Features and Operation; GND
- Page 6 – Both; on; wired
- Page 7 – Warranty
- Page 8 – Copyright 2004 Bryant Heating & Cooling Systems
Cancels: New
OM 17-101
11/04
• 7-Day Programmable
• 3 Occupied periods and 1 Unoccupied period
• Auto Changeover
• Large, Easy To Read Display
• Thermoglow™ Backlight
• Remote Sensor Ready
• Dry Contact Equipped
• Energy Saving Smart Fan
• Fan Purge, IAQ Feature
• Meets California Title 24
FRONT PANEL
1
DISPLAY
2
QUICK START
Set the clock and go
2
BASIC OPERATION
2
PROGRAMMING
Occupied and
Unoccupied Periods
3
ADVANCED SETUP
4
ABOUT ADVANCED FEATURES
AND OPERATION
5
WARRANTY
7
Table of Contents
IMPORTANT:
Follow
Installation Instructions
before
proceeding and set thermostat to mode “OFF” prior
to changing settings in setup or restoring factory
defaults.
Front Panel
Owner’s Manual
PROGRAMMABLE DIGITAL THERMOSTAT
53DFS250-SL-BRY
A UTO
Am
:
Su
COOL
HEAT
PROGRAM
SET CLOCK
HOLIDAY
FAN
MODE
ProgramOn
Pm
occupied 1
OVERR
:
Su
COOL
HEAT
Backlit LCD Display
Warmer or + Button
Cooler or - Button
Override Button
Heat or Cool Indicator
Red = Heat, Green = Cool
A UTO
Am
:
Su
COOL
HEAT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 The thermostat is preprogrammed from the factory to oper-ate equipment* without the need for further programming. To optimize the installation of this thermostat follow the in-structions in the Advanced Setup section. * The thermostat is not preprogrammed from the factory to operate heat pump...
Page 3 Basic Operation Programming Occupied and Unoccupied Periods ProgramOn Pm Su unoccupied Pm ProgramOn Su Override occupied 1 : Stop : : HEAT COOL HEAT COOL Pressing the up/down buttons in Auto mode will adjust both the heat and cool set point temperatures simultaneously.Pressing the up/down but...
Page 4 PROGRAMMING NOTES • If only 1 Occupied period is selected in step 1 on page 3, Occupied 2 and 3 programming steps are skipped. Further, if only 2 occupied periods are selected, Occupied 3 programming steps are skipped. • Heat and Cool set points for Occupied 1 are the same for every day of th...
