Page 2 - Table Of Contents; Set the clock and go; CAUTION
Table Of Contents FRONT PANELDISPLAYQUICK START Set the clock and go BASIC OPERATIONPROGRAMMING 4 Time Periods ADVANCED SETUPABOUT ADVANCED OPERATIONWARRANTY Page 1 CAUTION Follow Installation Instructions before proceeding. SET THERMOSTAT TO MODE “OFF” PRIOR TO CHANGING SETTINGS IN SETUP OR RESTORI...
Page 3 - Front Panel; Liquid Crystal Display; with Thermoglow; Mode Button; Temperature Sensor Bubble
Front Panel Page 2 Liquid Crystal Display with Thermoglow Up/Down Buttons Mode Button Fan Button Heat or Cool Indicator Heat = Red, Cool = Green Temperature Sensor Bubble 1 2 3 4 5 6 1 3 5 2 4 6
Page 4 - ONOFF; Fan On; HEAT; - indicates the system will automatically; OFF; - indicates the entire system is turned off.; PROGRAM ON; - indicates the stored program; Display
88 88 H EAT C OOL ONOFF AUTO Fan On Program Service Filter Locked Outside Setup On o Am Pm I8:88 88 Day Night Evening Morning SuMoTuWeThFrSa 1 2 4 3 Mode Indicators Selects the operation mode of the equipment. HEAT - indicates the heat mode. COOL - indicates the air conditioning mode. AUTO - indicat...
Page 5 - Service Filter
5 6 7 8 9 10 Outside Indication Indicates the temperature displayed is from the optional outside sensor. Page 21. Morning , Day , Evening & Night Indication Indicates the program time period. Page 8-11. Setup Indication Indicates the thermostat is in the programming mode. Page 12. Fan Operation ...
Page 6 - Quick Start; Set the Clock and Go
During Setup & Programming: Pressing the Mode buttonselects different flashing items. (Represented in dark black ) Pressing the Up and Downbuttons will modify the flashingselection. Press the Mode button.While holding the Mode,press the Fan button for 2 seconds to enter Setupscreens. Press both ...
Page 7 - Select Mode; Basic Operation
The HEAT setting indicates the temperature the room has toreach before the furnace will turn on to heat the room. The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room. OFF indicates both heating and air conditioning systems are tur...
Page 8 - Fan
buttons. In any mode, adjust the desired Set Temperature with Pressing the Up or Down buttons in Auto mode will adjust both the heat and cool set temperatures simultaneously.Pressing the Up or Down buttons in Heat or Cool modes will adjust only the heat or cool set temperature. Select Desired Temper...
Page 9 - Programming; Time Periods
Programming 4 Time Periods Page 8 Press Press Press Press Press the Mode button. While holding the Mode,press the Up button for 2 seconds to enter time period programming. Use the back cover Programming Worksheet to help with this section. Continued MODE MODE MODE MODE MODE Mo 74 C OOL 74 72 C OOL H...
Page 12 - Co; Py; No
Page 11 Co Py Tu No Programming 4 Time Periods Press Press Select Yes or No to copythe previous day’sprogram to this day. Yes No If Yes is selected: If No is selected: Selecting Yes, then pressing mode will copy theprevious day’s program and then will ask thesame copy question again. If yes is selec...
Page 13 - Advanced Setup; Hp
Advanced Setup Page 12 Press Press Press Continued Adjust the time of dayclock. Select residential HeatPump, On or Off. Select the day of theweek. Press the Mode button.While holding the Mode,press the Fan buttonfor 5 seconds to enter Setupscreens. NOTE: Each step # is located at the top right corne...
Page 14 - Eh; Cy
Advanced Setup Page 13 Press Press Press Press Press Continued Select the reversingvalve polarity forHeat Pump, O or B. (Step 4 only appears ifheat pump is on in step 3) Select Electric Heat Onor Off. (Step 5 only appears if heat pump is off in step 3) Adjust the minimum difference between cooling &...
Page 15 - I I; L I
Advanced Setup Page 14 Press Press Press Press Press Continued Press FAN MODE MODE MODE MODE MODE 9 I0 I I Setup Setup Setup Fan On Fan On Fan On Am Pm ON OFF 0:00 7:00 9:00 L I I2 ON Setup Adjust the programmablefan timer.0 - 60 minutes.0:00 = off Adjust the programmablefan start time. (step 10appe...
Page 17 - Advanced Setup Table
Advanced Setup Page 16 Step # Description Range Factory Default 1 Time of day clock set 24 hour 12:00 Am 2 Day of the week Sun - Sat Monday3 4 5 6 7 8 9 Programmable Fan 12 13 14 15 Reset Service Filter icon - - - -16 Service Filter run time set 0 - 1950 017 Heat Pump Off / On OffReversing Valve pol...
Page 18 - About Advanced Features & Operation; and; the setpoint; step
About Advanced Features & Operation Page 17 MEMORY BACKUP - In the event of a power loss, the thermostat will retain the stored program settings without external power or batteries. 2 STAGE OPERATION - The 2nd Stage of heat or cool is turned on when ( 1 ) the 1st Stage has been on for a minimum ...
Page 19 - ELECTRIC HEAT - Selecting Electric Heat on,; eh
About Advanced Features & Operation Page 18 ELECTRIC HEAT - Selecting Electric Heat on, page 13, step 5 , will cause the thermostat to turn on the fan any time there is a heat demand. Since all control the fan, this feature should be off is only electric. immediately gas furnaces unless the heat...
Page 20 - icon will appear on the; unlock; Locked; icon will
About Advanced Features & Operation Page 19 KEYPAD LOCK - To prevent unauthorized use of the thermostat, the front panel buttons may be disabled. To disable, or ‘lock’ the keypad, press and hold in the Mode button. While holding the Mode button in, press the Up and Down buttons in together. The ...
Page 21 - Both; allow the
About Advanced Features & Operation Page 20 DUAL SETPOINT BEHAVIOR - The adjustable setpoint range is: 35 - 99 degrees in Fahrenheit and 7 - 35 degrees in Centigrade. When in the modes Heat or Cool, this adjustable range is unhampered. When adjusting any Auto mode, including programming 4 Time p...
Page 22 - Fd; appears. This resets all factory settings.; To calibrate; press the Mode button once more.; thermostat wire
About Advanced Features & Operation Page 21 FACTORY DEFAULTS - If, for any reason it is desirable to return all stored settings back to the factory default settings, press the Mode button. While holding the Mode button in, press the Down button for 5 sec. All icons will appear. Press and hold in...
Page 23 - Warranty
Page 22 Warranty Five-Year Warranty - This Product is warranted to be free from defects in material and workmanship. If defect appears within five years from the date of original installation, whether or not actual use begins on that date, then the product does meet this warranty. A new orremanufact...
Page 24 - Programming Worksheet; see page 8
Programming Worksheet see page 8 F R I D A Y T U R A S D A Y Morning Morning Day Day Evening Evening Night Night Copy Fri Sat No Yes Copy Tue Wed No Yes Copy Thu Fri No Yes S U N D A Y Morning Day Evening Night Copy Sat Sun No Yes Copy Wed Thu W E N E S D D A Y T U R H S D A Y Morning Morning Day Da...
