Bryant 915S - Manual
Bryant 915S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FEATURES AND BENEFITS
- Page 3 – SPECIFICATIONS; Heating Capacity and Efficiency; Airflow Capacity and Blower Data
- Page 4 – MODEL NUMBER NOMENCLATURE; FURNACE COMPONENTS
- Page 5 – ACCESSORIES
- Page 8 – Venting System Length Calculations; FOR EACH; long radius elbows and a concentric vent kit.; EACH
- Page 11 – RETURN AIR TEMPERATURE; C) db or intermittent operation down to 55; SUPPLY AIR; MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS; ELBOW
- Page 12 – DOWNFLOW SUBBASE; Assembled; FURNACE; Concentric Vent Kit; installed in downflow applications.
- Page 13 – MEDIA FILTER CABINET; B Opening; TYPICAL WIRING SCHEMATIC
- Page 14 – DIMENSIONAL DRAWING
- Page 15 – GUIDE SPECIFICATIONS; General
1
915SA 95 AFUE
LEGACY LINE SINGLE--STAGE
4--WAY MULTIPOISE
CONDENSING GAS FURNACE
Product Data
A11264
The 915S Multipoise Condensing Gas Furnace is part of the
Legacy Line product offering. Sporting a PSC blower motor and
an Annual Fuel Utilization Efficiency (AFUE) of 95.5%, this
single-stage gas furnace provides efficient comfort for
homeowners. This Legacy Line Gas Furnace also features 4-way
multipoise installation flexibility, and is available in nine model
sizes. The 915S can be vented for direct vent/two-pipe, ventilated
combustion air, or single-pipe applications. A Bryant
R
Air
Conditioner or Heat Pump can be used to form a complete system.
All units meet California Air Quality Management District
emission requirements. These furnaces are approved for
Manufactured Housing (Mobile Home) applications. All sizes are
design certified in Canada.
STANDARD FEATURES
S
4-way multipoise design for upflow, downflow or horizontal
installation.
S
Optional through-the-cabinet downflow venting.
S
Installation flexibility with a 360-degree rotating elbow.
S
Ideal condensing furnace height 35” cabinet: short enough for
taller coils, but still allows enough room for service.
S
Silicon Nitride Perfect Light
t
Hot Surface Igniter.
S
Aluminized-steel primary heat exchanger.
S
Stainless-steel condensing secondary heat exchanger.
S
High-quality corrosion-resistant prepainted steel cabinet with
hemmed edges for safety.
S
Factory-configured ready for upflow applications.
S
Direct-vent/sealed combustion, single-pipe venting or ventilated
combustion air.
S
PSC blower motor, single-speed inducer motor, and single-stage
gas valve.
S
Self-diagnostics
S
Approved for Twinning applications (42060 through 60120
sizes, only).
S
Propane convertible (See accessory list).
S
Approved for Manufactured Housing/Mobile Home applications
(except 140,000 Btuh input) with MH accessory kit.
S
Convenient Air Purifier and Humidifier connections.
S
Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S
Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1-inch water column with all
present air inlets, air outlets, and condensate drain port(s) are
sealed.
LIMITED WARRANTY*
S
10 year parts and lifetime heat exchanger limited warranty to the
original purchaser upon timely registration.
S
Limited warranty period is five years for parts and twenty years
for the heat exchanger if not registered within 90 days of
installation.
{
* For owner occupied, residential applications.
{
Jurisdictions where warranty benefits cannot be conditioned on registra-
tion will receive registered limited warranty benefits.
Use of the AHRI Certified
TM
Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
C E R T I F I E D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAP ORDERING NO. CASING DIMENSIONS (IN.) RATED HEATING OUTPUT† HEATING AIRFLOW COOLING CFM @ 0.5 ESP (in WC) MOTOR HP-SPEED APPROX SHIP WEIGHT (LB) H D W (BTUH) AFUE CFM‡ Heating ESP (in. WC) 915SA30040S14 35 29.5 14.2 39,000 95.5% 820 0.10 625-905 1/2 - 4 123 915SA30060S14 35 29.5 14.2 58,000 95....
3 SPECIFICATIONS Heating Capacity and Efficiency 30040 30060 42060 48080 60080 42100 60100 60120 60140 Input HighHeat (BTUH) 40,000 60,000 60,000 80,000 80,000 100,000 100,000 120,000 140,000 Output HighHeat (BTUH) 39,000 58,000 58,000 78,000 78,000 97,000 97,000 117,000 135,000 Efficiency AFUE % (I...
4 MODEL NUMBER NOMENCLATURE 91 5 S A 30 040 S 14 A -- A S - Single StageT - Two StageM - Modulating 0 --- 90 AFUE3 --- 93 AFUE5 --- 95 AFUE6 --- 96 AFUE7 --- 97 AFUE S - StandardE - Energy EfficientV - Variable Speed 14 - 14.2”17 - 17.5”21 - 21.0”24 - 24.5” 91 - Legacy92 - Preferred98 - Evolution Vo...