Bryant 619E - Manual
Bryant 619E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – STANDARD FEATURES AND FIELD-INSTALLED ACCESSORIES; †Not used on 38HDS systems.
- Page 4 – MODEL DESCRIPTION; OUTDOOR UNITS
- Page 5 – SYSTEM CAPACITIES; †Unit must be reconfigured for 1
- Page 6 – SPECIFICATIONS — 538A AND 538C CONDENSING UNITS
- Page 7 – SPECIFICATIONS — 538D HEAT PUMP UNITS
- Page 8 – SPECIFICATIONS — 538S CONDENSING UNITS; TXV in Condensing Unit; SPECIFICATIONS — 619E FAN COIL UNITS; Control or TXV
- Page 10 – DIMENSIONAL DRAWING — BASE UNIT — 538A018-024 CONDENSING UNITS
- Page 12 – DIMENSIONAL DRAWING, BASE UNIT — 538S CONDENSING UNITS
- Page 15 – HEAT PUMP UNITS; †Cooling only fan coil unit.; MULTI-SPLIT CONDENSING UNITS; †Cooling only fan coil unit.
- Page 16 – FAN COIL UNITS
- Page 17 – outdoor unit. Both refrigerant lines must be insulated.
- Page 20 – MAXIMUM LINE LENGTHS; *This changes to 25 ft with addition of accessory crankcase heater.
- Page 21 – FITTING LOSS IN EQUIVALENT FT FOR ELBOWS; HEAT PUMP SYSTEM PISTON GUIDE AND REFRIGERANT CHARGES; EFFECTIVE CAPACITY LOSS
- Page 28 – • Off Mode — When the unit is in the off mode, all functions; LEGEND
- Page 30 – time regardless of coil temperature.; Electronic Control Defrost Regions Map
- Page 32 – Air Conditioning
DESCRIPTION
These duct-free split systems cool, heat (heat pump systems
only) dehumidify, circulate, and filter the air — with minimum
maintenance. They are the ideal complement to your ducted
system when it is impractical or prohibitively expensive to use a
ducted system. The outdoor units, when matched with model
619E fan coil units, offer many technological features and reli-
able operation.
The duct-free split systems are perfect for add-ons, such as an
office or family room addition, and whenever you have special
space requirements; like for a computer room. Or consider duct-
free split systems when changes in the cooling load cannot be
handled by the existing system; for instance, when adding heat-
generating equipment to an already air-conditioned space.
Split systems can also be used when adding air conditioning to
spaces that are heated by hydronic or electric heat, and no
ductwork exists. Historical renovations are another application
for which duct-free split systems are well suited, especially
when preserving the looks of the original structure is essential.
When noise is a concern, these whisper-quiet split systems are
your answer because you don’t have to worry about duct
design.
If security is an issue, outdoor and indoor units are connected
only by refrigerant piping to prevent intruders from crawling
through ductwork. Also, since the outdoor units can be installed
6-in. away from outside walls, coils are protected from vandals
and severe weather.
In addition, the compact duct-free split systems take only a few
hours to installl, without any major interruptions to the custom-
ers’ workplace or home.
STANDARD SYSTEM FEATURES
HIGH-EFFICIENCY design with SEERs (Seasonal Energy Effi-
ciency Ratios) up to 12.0 and HSPFs (heating seasonal perfor-
mance factors; heat pump systems only) of 6.8.
MICROPROCESSOR CONTROL for accurate control of the de-
sired comfort level.
EXTENSIVE DIAGNOSTICS alert the user to the existence of
problems.
BUILT-IN RELIABILITY COMPONENTS include a suction-line
accumulator that safeguards the compressor against loss of lu-
brication, while start capacitors and relays (non-scroll units) as-
sure dependable start-ups, especially during low-voltage
conditions (down to 187 v). High- and low-pressure safety
switches, crankcase heater (non-scroll units), liquid line filter
drier (538A, 538C, 538S), bi-flow liquid line filter drier (538D),
and lock-out protection are also standard on most sizes.
538A
538S (048 Shown)
619E
538C/D009,012
Bryant
Day & Night
Payne
Air Conditioning
HIGH WALL DUCT-FREE,
SPLIT SYSTEMS
Model 619E
Sizes 009-024
3
⁄
4
to 2 Tons
Form No. PDS 619E.09.1
PRELIMINARY PRODUCT DATA
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
STANDARD FEATURES AND FIELD-INSTALLED ACCESSORIES STANDARD FEATURE/FIELD-INSTALLED ACCESSORY HIGH WALL SYSTEMS (619B,D) Internal Condensate Pump A Mounting Brackets S Microprocessor Controls S Cleanable Filters S 3-Speed Indoor-Fan Motor S Automatic Indoor-Fan Speed Control S Extensive Diagnostics S...
MODEL DESCRIPTION OUTDOOR UNITS FAN COIL UNITS *009 systems only. †538C,D only. **538A, 538D only. ††538A, 538D, 538S only. \ 538S only. *009 systems ony. 4
SYSTEM CAPACITIES SYSTEM TYPE NOMINAL SYSTEM CAPACITY (Tons) FAN COIL TYPE(S) INDOOR SECTIONS OUTDOOR SECTION 538 TOTAL STANDARD CFM (AT HIGH SPEED) SYSTEM NET COOLING (Btuh) SYSTEM NET HEATING (Btuh)* SEER HSPF* OUTDOOR SOUND RATING (Decibels) Ckt Qty Model No. 619 Cooling Only 3 ⁄ 4 High Wall — 1 ...
