Broan F403023 - User Manual

This specification sheet outlines the technical performance and installation requirements for Broan’s F40000 Series range hoods, focusing on ventilation capacity, sound output, and compliance standards like UL and HVI certifications. The document highlights key operational features such as airflow ratings (CFM), fan control options, filter compatibility, and acoustic measurements across different duct configurations–including vertical and horizontal rectangular ducts–as well as round ducts. It also emphasizes standardized testing protocols for ventilation efficiency and noise levels to ensure reliable performance in residential kitchens.

Loading the manual

SPECIFICATION SHEET

Broan-NuTone LLC,

926 West State Street, Hartford, Wisconsin, USA 53027 broan-nutone.com 800-558-1711

REFERENCE

QTY.

REMARKS

Project

Location

Architect

Engineer

Contractor

Submitted

Date

TYPICAL SPECIFICATION

Range hood shall be Broan Model F40000.
Unit shall be convertible between ducted using a washable
aluminum filter (included) and non-ducted (purchase non-
ducted filter separately).
Motor to be permanently lubricated. RPM not to exceed 2850.
Unit shall have a two-speed fan switch with separate light
switch.
Sides shall be mitered and bottom edge hemmed - with no
sharp edges.
Air delivery shall be no less than 160 CFM and sound levels
no greater than 7.5 Sones (3¼" x 10" horizontal), 160 CFM
at 7.0 Sones (vertical discharge) or 190 CFM at 6.5 Sones
(7" round discharge). All air and sound ratings shall be certified
by HVI. Unit shall be U.L. listed.

Constructed with quality and good looks, the F40000
is superior to the competition whether ducted vertically,
horizontally, or non-ducted.

FEATURES

•

Max. blower CFM†: 230

•

120 V, 2850 RPM

•

Two speed fan control

•

Polymeric blade and light lens

(accepts up to 15 W LED bulb, A19, E26 base)

•

Washable aluminum filter

•

Converts to non-ducted by removing cover plate from front of

hood and installing the non-ducted filter (purchase separately)

•

Mitered sides and hemmed bottom for safety and good looks

•

3¼" x 10" damper/duct connector included

•

7" round duct adapter plate included. 7" round damper

purchase separately.

•

Available in 24", 30", 36" and 42" widths

•

Contemporary styling in White, Almond, Biscuit, Black,

Stainless Steel (all widths), Black Stainless Steel (30" width
only), and Stainless Finish (24", 30" and 36" widths only)

32K

99043020L

F40000 SERIES
TWO-SPEED
4-WAY CONVERTIBLE
RANGE HOOD

Can be used to comply
with LEED requirements.

† Max. blower CFM indicates the performance of the hood blower in open air
and is not HVI cer tified.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.