Zip HT1017Z2 - Manuals

Zip HT1017Z2 Faucet – User Manual in PDF format online.

Manuals:

User Manual

User Manual Zip HT1017Z2

Summary

Page 2 - This page intentionally left blank

Page 2 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 This page intentionally left blank

Page 3 - Before Commissioning:; Check List

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 3 of 16 Before Installation: A. Read the instructions. B. Note: Not all fittings are supplied with the appliance kit. Isolation valves are not supplied. C. The pressure limiting valve must be fitted as part of the k...

Page 4 - Contents

Page 4 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Read These Warnings First. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Models covered by these in...

Page 5 - Read These Warnings First; Safety; This way up

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 5 of 16 Read These Warnings First Safety This appliance is not intended for use by persons (Including Children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they...

Page 6 - Models Covered by These Instructions; Installation Requirements; Frost Protection; Section Heading

Page 6 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Models Covered by These Instructions Before installing ensure that the following have been provided at the installation site: • Sufficient space in the cupboard to install the undersink unit in accordance wi...

Page 7 - Special Tools Required; Step A - Installing the tap; Installation Procedure

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 7 of 16 In addition to normal tools, the following will be required: • 35mm diameter sheet metal hole punch for sink tops. (not supplied) • 35mm diameter hole saw for timber bench tops. (not supplied) • Nut runner t...

Page 8 - Step B - Installing the undersink unit; Step C - Installing the filter; This instruction is critical :; Connection as viewed from the top; External Filter Connection Fig. 1

Page 8 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Installation Procedure continued Step B - Installing the undersink unit SPECIAL NOTE: The HydroTap undersink units are heavy, take note of the weights listed in the table on page 6. If you think you cannot l...

Page 9 - Cartridge Replacement

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 9 of 16 - Fit the pressure limiting valve to the outlet side of the isolating valve (not supplied). - Mount the filter and flush valve assemblies in a convenient position using the angle bracket supplied. Connect th...

Page 10 - Step F - Testing and commissioning; Boiling

Page 10 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Step F - Testing and commissioning Boiling The unit is now running in normal operating mode. The Red LED will flash until usable temperature is reached. Before using the HydroTap wait 5 minutes after this p...

Page 11 - Operating the touch Tap; Red Boiling Water Light; To Reset Sleep Mode; Set Sleep Mode; Set Sleep Mode; OFF; White Filter Light; OFF

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 11 of 16 Operating the touch Tap RED markers for Boiling Water BLUE markers for Ambient water Safety lock Warning lights • To dispense boiling water touch the Red Markers + Safety Lock simultaneously. • To dispense ...

Page 12 - Operating the Classic lever Tap; Filter light; Filter Change Light Off:; Lever Operation; Boiling Water Lever; Ambient Water Lever; HydroTap with Disable levers fitted

Page 12 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Operating the Classic lever Tap Red Boiling Water Light On all the time: This indicates that the boiling water is ready. Flashing Fast: This indicates the boiling water is below usable temperature and the S...

Page 13 - Font Installation Procedure; Symptom; Trouble Shooting

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 13 of 16 Font Installation Procedure A font kit installation is available for this product and is sold separately as an accessory. For details of the available font kits, please contact your Zip customer service pro...

Page 14 - Cleaning; End of life disposal

Page 14 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Cleaning Do not use strong, corrosive, spray or abrasive cleaners. Clean with a soft cloth or brush and mild soap and water. Do not spray water over the tap as it may damage the low-voltage electronics. Und...

Page 15 - Notes

Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 Page 15 of 16 Notes

Page 16 - Head Office; Contact Details

Page 16 of 16 Zip HydroTap Installation and Operating Instructions - 89585 - March 2016 v2.03 The standard cup referred to in this publication is 167 ml (6 fl oz). The standard glass is 200 ml (7 fl oz). The terms “Zip” and “HydroTap” are registered trade marks of Zip Heaters (Aust) Pty Ltd. Zip pro...