Zanussi ZWT 71201 WA - Manuals

Detergent dispenser drawer Compartment for detergent used for pre- wash and soak phase or for stain remover usedduring the stain action phase (if available). Theprewash and soak detergent is added at the be-ginning of the wash programme. The stain re-mover is added during the stain action phase. Com...

10 Display 10.1 10.2 The display shows the following information: 10.1 Child safety lock This device permits you to leave the appliance unattended during it's functioning. 10.2 • Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes (for examp...

Washing programmes ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of Laundry Options Detergent Compartment Cottons 1–2–3–4–5 90°- ColdMain wash - RinsesLong spin at maximum speed Max. load 7 kg - Reduced load 3 kg 1) For white and coloured cotton ...

Drying Programmes Degree of Drying Type of Fabric Drying Load Spin Speed Suggested drying time in Minutes Ideal for towelling materials Cotton and linen (bathrobes, bath tow- els, etc) 4 kg3 kg 1.5 kg 1200 180 - 200120 - 130 85 - 95 Suitable for items to put away without ironing 1) Cotton and linen ...

Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse.Treat any residual marks with bleach. Ink: depending on the type of ink, moisten the fabric first with acetone 1) , then with acetic acid; treat any residual marks on white fabrics withbleach and then rinse...

to the appliance. This function remains enabledalso when the washing machine is not working.There are two different ways to set this option: 1. Before pressing button 7 : it will be impos- sible to start the machine. 2. After pressing button 7 : it will be impossi- ble to change any other programme ...

Care and cleaning Warning! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning ormaintenance work. Descaling The water we use normally contains lime. It is agood idea to periodically use a water softeningpowder in the machine. Do this separately froma...

When no more water comes out, unscrew thepump cover by turning it anti-clockwise andremove the filter. Use pliers, if necessary. Al-ways keep a rag nearby to dry up any waterspillage when removing the cover.Clean the filter under a tap, to remove anytraces of fluff. Remove foreign bod-ies and fluff ...

• Screw the hose back to the machine and make sure the connection is tight. • Turn on the water tap. Frost precaution If the machine is exposed to temperatures be-low 0°C, certain precautions should be taken. • Turn off the water tap. • Unscrew the inlet hose. • Place the end of the emergency emptyi...

Problem Possible cause/Solution The machine does not dry ordoes not dry properly: The drying time has not been selected. • Select the drying time. The water tap is not turned on. • Open the water tap. The drain filter is clogged. • Clean the drain filter.The machine is overloaded. • Reduce the laund...

Electrical connectionVoltage - Overall power - Fuse Information on the electrical connection is given on the rating plate, onthe inner edge of the appliance door. Water Supply Pressure MinimumMaximum 0,05 MPa0,8 MPa Maximum Load Cotton 7 kg Maximum Dry Load CottonCotton Big CapacitySynthetic 3 Kg4 K...

After removing all thepackaging, carefullylay machine on it'sback to remove thepolystyrene basefrom the bottom. Remove the powersupply cable and thehose from the hoseholders on the rear ofthe appliance. Unscrew the threebolts with the sup-plied spanner. Slide out the relevantplastic spacers. Fill th...

Caution! • This appliance must be connectedto a cold water supply . • Before connecting up the appliance to new pipework or to pipework that hasnot been used for some time, run off areasonable amount of water to flush outany debris that may have collected. • Do not use the hose from your previous ap...

38 mm (1.5”) standpipe diamater 30 cm (12”) The drain hose may be extended to a maxi-mum of 4 metres. An additional drain hoseand joining piece is available from your localService Force Centre. The joining piece musthave an internal diameter of 18 mm. Min. 60 cm (23.6”) Max. 90 cm (35.4”) If your dr...

Building in This appliance has been designed to be builtinto the kitchen furniture. The recess shouldhave the dimensions shown in picture A. A 600 596 555 170 75 176,5 416 100 60 818 min.820 min.560 When installing the appliance into the kitchenfurniture ensure, if possible, the hoses areplaced in e...

Graphic F Front view 5 mm Hardwood strip Additional pieces of timber should run from front to back 40 600-605 100 Where the appliance has been raised bymounting onto a wooden base provided bythe installer. The material used to constructthe base should have anon slip surface, bewater repellent and if...