Zanussi ZWG 5120 P- Manuals

Page 2 - General safety

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Installation _ _ _ _ _ _ _ ...

Page 4 - Packaging materials

To activate this device, ro- tate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibili- ty of closing the door, ro- tate the button anti-clock- wise until the groove is vertical. Frost pre...

Page 5 - Ecological hints; Product description

This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environ- ment, we recommend that you follow these tips:• Normally soiled laundry may be washed without pre- washing in order to save...

Page 6 - Installation; Unpacking

Water supply pressure Minimum Maximum 0,05 MPa 0,8 MPa Maximum Load Cotton 6 kg Spin Speed Maximum 1200 rpm (ZWG5120P) 1400 rpm (ZWG5140P) Installation Unpacking Warning!• Read carefully the "Safety information" chap- ter before installing the appliance. x 3 x 3 x 2 x 1 B A C Warning! Remove...

Page 7 - Positioning and levelling

• Remove the power supply cable and the draining and inlet hose from the hose holders ( C ) on the rear of the appliance. • Unscrew the three bolts ( A ) and remove the hose holders ( C ). • Slide out the relevant plastic spacers ( B ). • Plug the smaller upper hole and the two large ones with the c...

Page 9 - First use

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your Local Centre. Connections overview 115 cm 140 cm m c 150 m c 100 max 100 cm min. 60 cm max 100 cm min. 60 cm m c 9 0 m c 115 Electrical connection • The appliance must be earthe...

Page 10 - Daily use; Sort out the laundry

Daily use Sort out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, deli- cates, woollens. Before Loading The Laundry Important! Make sure that no metal objects are left in the laun...

Page 15 - At the end of the programme

Extra Rinse l e t s t i u t r a t S é r é f f i d t r a p é D l e n s r e p u S e d i p a R This appliance is designed for saving water. However, for people with very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water. Press simultaneousl...

Page 16 - Door seal; Washing programmes; Type of Laundry

• Turn the programme selector dial to .• Select the draining or spinning programme.• Reduce the spin speed if needed, by pressing the rel- evant button. • Press the button 6 . At the end of the programme, the door can be nowopened. Turn the programme selector dial to to switch the appliance off. Rem...

Page 19 - Consumption values; Programme; Care and cleaning; Maintenance Wash

Consumption values Programme Energy consumption (KWh) Water consumption (litres) Programme duration (Mi- nutes) White Cottons 90° 2.10 78 175 Cottons 60° 1.20 72 170 Cotton ECO 60° 1) 1.02 49 180 Cottons 40° 0.75 72 145 Synthetics 40° 0.60 57 95 Delicates 40° 0.60 65 75 Wool/ Handwash 30° 0.30 48 55...

Page 20 - Cleaning the drain filter

• Use a stiff brush to clean and remove all washing powder residue. • Clean all the removed parts of the dispenser draw- er under a tap to remove any traces of accumulated powder. • Use the previous brush to clean the re- cess, ensuring that up- per and lower part of it is well cleaned. After having...

Page 21 - Cleaning the water inlet filters; What to do if...

The filter is inserted correctly when the indicator on its top is visible and blocked. • close the filter cover;• insert the mains plug again. Cleaning the water inlet filters Important! If the appliance doesn't fill, it takes a long time to fill with water, the starting button flashes red or the di...

Page 25 - Model description

The necessary data for the service centre is on the rat- ing plate. We recommend that you write the data here: Mod. ... ... ... Pr od. No. ... ... ... Ser . No. ... ... ... Mo d . .. . ... .. . Pr od. N o . .. . ... . . S er . No . ... .. . ... Model description (MOD.) .................................