Zanussi ZWF 1231 W, ZWF 1431 W, ZWF 1431 S, ZWF 1631 W - Manuals

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Drain pump 5 Adjustable feet Detergent dispenser drawer Prewash Main wash Fabric softener Child safety feature This machine incorporates a special child safety featureto prevent small children from be...

1 “On/Off” button Press this button to switch the washing machine on.The display (8) will show three flashing dashes or aflashing zero. You will find more detailed explanationson pages 7 & 8 (see “Display”).Press the On/Off button again to switch the machineoff. 2 MAINS-ON light This light is co...

10 To select Drain only, press the “ Skip ” button three times, the wash - rinses - spin LED,s go out. The drain LED only remains alight. 11 “Delay” button This button makes it possible to delay the starting of theprogramme selected from 30 min - 60 min - 90 min, 2hours and then by 1 hour up to a ma...

11 Operating Sequence Before the first wash, we recommend that you run acotton cycle at 95°C, without any laundry in themachine, to remove any manufacturing residue from thedrum and tub.Pour 1/2 a measure of detergent into the main washcompartment of the dispenser drawer and start the machine. WASHI...

14 Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 g Linen han...

16 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

17 Washing programmes ZWF 1231 W - ZWF 1431 W - ZWF 1431 S - ZWF 1631 W * This data is given purely as an indication: the consumption values may vary in relation to the quantity and typeof laundry, the temperature of the water supply and the ambient temperature. The data refers to the highesttempera...

18 18 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any l...

19 • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dryup spillage of water when removing the cover. • Remove any objects from the pump impeller byrotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • ...

20 The door will not open ● The water level is above the bottom edge of the door. ● The machine is heating the water. ● The drum is turning. Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer. Before c...

Symptom Possible causes 21 21 Spinning starts late or the machinedoes not spin ● The electronic unbalance detection device has cut in because thelaundry is not evenly distributed in the drum. The laundry isredistributed by reverse rotation of the drum. This may happen severaltimes before the unbalan...

22 22 Guarantee Conditions Standard guarantee conditions We, Zanussi Electrolux, undertake that if, within 12months of the date of the purchase, this ZANUSSIELECTROLUX appliance or any part thereof is provedto be defective by reason only of faulty workmanship ormaterials, we will, at our option repa...

25 Water inlet An inlet hose is supplied and can been found inside themachine drum. Do not use the hose from your previous machine toconnect to the water supply. 1. Open the porthole and extract the inlet hose . 2. Connect the hose with the angled connection to the machine. Important!Do not place th...

26 If your drain hose looks like this (see below) you do notrequire the “U” piece”. Just push the hose firmly intothe standpipe. 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, removeany blanking plug that may be in place. Push the drain hose onto the spigot and secure w...

27 27 If you require any further advice please contact yourlocal water authority. Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any li...