Zanussi ZSF 2420- Manuals

Programme selector Turn the programme selector clockwise or anticlockwiseto select the programme and temperature according tothe programme chart. Start/Cancel button In addition to starting a programme you can, by pressingthis button, adjust the setting of the water softener andcancel a programme in...

1) german degree of measurement for the water hardness 2) millimol, internationel unit for water hardness *) factory setting In the following settings the dishwasher must be switched off and all programmes completed. See chapter ”Using the appliance” for information on how to complete the programme....

13 minutes - 8 - Programme chart Type ofdishes Type of soil: • normally soiled • dried-on food remnants • heavily soiled • dried-on food remnantsespecially egg-white and starch • normally soiled • lightly soiled • 3) Washingtime withdrying: 94 minutes 117 minutes 159 minutes 36 minutes 7 minutes Pro...

How to load the dishes The illustration shows the dishwasher loaded with sixplace settings. Your own dishes are not likely to beidentical to this load, but if you follow the advice belowwe are sure you will be pleased with the results. ● Always place glasses, cups and bowls upside down. ● Incline de...

Starting the programme 1. Scrape or rinse off solid food remnants. 2. Load the dishwasher. (See the basket and loading). 3. Put the correct amount of detergent into the detergent dispenser and close the dispenser lid. 4. Close the door. 5. Select the required programme (see pro gramme chart). The pr...

- 11 - General cleaning Inspect the filters and spray arm nozzle before re-loadingthe dishwasher and remove any food scraps. Wipe roundthe rubber gasket at the bottom of the door to removegrease which tends to collect there. Cleaning the filters There are two filters, a coarse one and a fine one whi...

- 12 - Something Not Working The programme will not start. The dishwasher is not filling with water. Water not discharged at end of cycle. Dishes not washed satisfactorily. Visible lime deposits or white filmon the dishes. The dishwasher is noisy. The dishes are not quite dry and arenot shiny. • Is ...

- 13 - Service Service and Spare Parts In the event of your appliance requiring service, or if youwish to purchase spare parts, please contact your localService Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to theService Force Centre covering your post co...

- 14 - Guarantee Conditions Standard guarantee conditions We, Zanussi Electrolux, undertake that if within 12 months from the date of the purchase this ZANUSSI ELECTROLUXappliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at ouroption r...

- 16 - Unpacking 1 Damages If the dishwasher has been damaged during transport,you should immediately notify the company responsiblefor delivering it.If you discover any damage, faults or that anything ismissing, you should notify your retailer immediately. Never leave packaging material in a place ...

- 17 - Installation Water inlet The dishwasher is equipped with safety featureswhich are to prevent the water from going back to the fresh water system. These features are ac-cording to current water technical safety regulations. The dishwasher should be permanently plumbed into aseparate cold water...

Power supply The dishwasher is supplied with a lead and electricalplug for connection to a 230 V, 13 A earthed wallsocket. Before any work is carried out on thedishwasher, it must be isolated from the electricmains supply, for example by removing the plugfrom the wall socket. Permanent electrical in...

- 19 - The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual. Before conducting the measurements the dishwasher shall be operated for one or two complete cycles usingdetergent and a clean load. Test standard: EN 50242 and EN 60704 Rated capacity: 6 pla...