Zanussi ZHC 590- Manuals

5 OPERATING INSTRUCTIONS The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.The appliance can be installed to recirculate or extract contaminated air. Control Panel The hood can be switched on pushing directly onto the requested speed without fi rstl...

6 To Operate Select the required fan speed and light if required. Recirculation In the recirculation mode the contaminated air enters the cooker hood through the grease fi lters. The air is cleaned by passing through the charcoal fi lters before being passed back into the kitchen through the grilles...

7 Before carrying out any maintenance or clean-ing isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fi re hazard. External Cleaning Wipe the cooker hood frequently with warmsoapy water using a mild detergent. Never use scourin...

8 Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. Charcoal Filters In the recirculation mode the charcoal fi lters absorb smells and unwanted odours. Enabling the alarm signal • In Recirculation version Hoods, the Filter saturation alarm can be enabled ...

9 SOMETHING NOT WORKING SERVICE AND SPARE PARTS If, having followed these instructions carefully, your cooker hood fails to work properly please carry outthe following checks. Symptom The cooker hood will not start The cooker hood is not working effectively The cooker hood has switched off during op...

10 GUARANTEE CONDITIONS We Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE...

11 INSTALLATION INSTRUCTIONS It is dangerous to alter the speci fi cations or attempt to modify this product in any way. Technical InformationDIMENSIONS HEIGHT OF CANOPY: 935 mm HEIGHT OF CHIMNEY: (UPPER SECTION) 290 mm (LOWER SECTION) 935 mm WIDTH OF CANOPY : 370 mm DEPTH OF CANOPY: 370 mm ELECTRIC...

12 INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of...

13 A: Built-in Electric Hob: 650mm clearanceB: Built-in Gas hob: 700mm clearanceC: Slot-in Electric Cooker: 685mm clearanceD: Slot-in Gas Cooker: 787mm clearance Hob Clearance Height The cooker hood is designed to be fi tted over a cook- ing appliance at the clearance heights stated, providing the m...

14 INSTALLING THE COOKER HOOD Drilling the Ceiling/Support Shelf • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. • Place the drilling template 21 provided on the ceiling/ support shelf, making sure that the template is in the correct position by lining up the axes of t...

16 INSTALLING THE COOKER HOOD Ducting Connection Connect the ducting chosen to:• the Ø150mm ducting spigot on top of the motor housing, or the Ø150-120mm ducting spigot item 9 and secure using the jubilee clips item 25 . • A Ø120-125mm collar item 9a is provided to fi t over the Ø120mm ducting spigo...

17 Chimney Stack The chimney consists of two sections. The lower chimney measures (with the Hood body and recirculation grilles) 935 mm and the upper chimney measures 290 mm. The overall installed measurement is min. 935 - max 1215 mm. Fitting the Upper Chimney and the Hood Body • Position the upper...

18 In the event of your appliance requiring service, or if you wishto purchase spare parts please contact your local ServiceForce Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the ServiceForce centre covering your post code area. For the address of your loca...