Zanussi ZG 1102- Manuals

13 Please examine the appliance for any damage sustained during transportation! If the appliance is damaged please immediately inform the forwarding company before the appliance is connected. The packing material should be disposed properly. ZG 1102 / ZGW 1302 / ZGW 1302 X 1) Cooking zone ∅ 180 mm 1...

15 The maintenance remains the same for glass and ceramic hobs. Never use aggressive detergents or scou- ring powder and sponges with abrasive surfaces. Cleaning after each use • Slight, not burnt soiling has to be wiped off with a damp cloth without using detergents. The use of detergents may lead ...

16 • Cut out worktop to prescribed measurements of templates (sawexactly along the scribing). • Check seal for perfect fit and overall cover (see detail A). • Lower the ceramic hob into place and align correctly. Fastening according to Fig. 1 • Tighten bracket against the underside of the worktop. •...

17 You are able to clear the following defects: • When the cooking zone does not heat up after you switched it on? => Make sure that the fuse is turned on. • You hear a buzzing when you heat up a zone? => This is no defect. It stops with increasing heat. • Discolouring of a cooking zone? =>...