Zanussi ZFU25201WA- Manuals

Page 2 - Contents; Safety information

Contents Safety information 2 Safety instructions 3 Product description 5 Operation 5 Daily use 6 Care and cleaning 7 Hints and tips 8 Troubleshooting 8 Installation 10 Technical information 13 Subject to change without notice. Safety information Before the installation and use of the appliance, car...

Page 3 - Safety instructions; Installation

• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • Do not damage the refrigerant circuit. • Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recomm...

Page 5 - Product description; Product overview; Operation; Control panel

Product description Product overview 1 4 2 3 5 1 Control panel 2 Flaps 3 Freezer drawers 4 Rating plate 5 Maxibox drawers Operation Control panel 1 2 3 4 5 1 Alarm light 2 QuickFreeze indicator 3 QuickFreeze switch 4 Power indicator light www.zanussi.com 5

Page 6 - Daily use

5 Temperature regulator Switching on 1. Insert the plug into the wall socket. 2. Turn the temperature regulator clockwise to a medium setting. The Power indicator light and the Alarm light will light up. Switching off To turn off the appliance, turn the Temperature regulator to the "O" posit...

Page 7 - Care and cleaning; Periodic cleaning

Thawing Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer. Removal o...

Page 8 - Periods of non-operation; Hints and tips; Normal operating sounds; Troubleshooting

Periods of non-operation When the appliance is not in use for long periods, take the following precautions:1. Disconnect the appliance from electricity supply. 2. Remove all food. 3. Clean the appliance and all accessories. 4. Leave the door/doors open to prevent unpleasant smells. WARNING! If the c...

Page 10 - Closing the door; Positioning

Problem Possible cause Solution Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray. Temperature cannot be set. The QuickFreeze or QuickChill function is switched on. Switch off Quic...

Page 12 - Levelling; Door reversibility

letter “E“ or by the earth symbol or coloured green and yellow. 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red. 4. Check that no cut, or stray strands...

Page 13 - Technical information; Technical data

1 2 3 5. Remove the door. 6. Position the pin and the washers on the opposite side (4). 4 6 5 7. Unscrew the upper pin (1) and place it on the opposite side (2). 2 1 8. Refit the door. 9. Refit the plinth. 10. Stand the appliance upright. 11. Unscrew the handle (1) and fix it on the opposite side (2...

Page 14 - ENVIRONMENT CONCERNS

The technical information are situated in the rating plate, on the external or internal side of the appliance and in the energy label. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health ...