Zanussi ZFC245P- Manuals

13 Positioning the door shelves To permit storage of food packages of various sizes,the door shelves can be placed at different heights. To make these adjustments proceed as follows:Gradually pull the shelf in the direction of the arrowsuntil it comes free, then reposition as required. D040 Movable ...

14 MAINTENANCE Unplug the appliance before carrying outany maintenance operation. Periodic cleaning Clean the inside with warm water and bicarbonate ofsoda. Rinse and dry thoroughly. Periods of non-operation When the appliance is not in use for long periods,take the following precautions: remove the...

15 INSTALLATION Location The appliance should be installed well away fromsources of heat such as radiators, boilers, directsunlight etc. Best performance is obtained withambient temperature between +18¡C and +43¡C(class T); +18¡C and +38¡C (class ST); +16¡C and +32¡C (class N); +10¡C and +32¡C (clas...

16 Electrical connection Before plugging in, ensure that the voltage andfrequency shown on the serial number platecorrespond to your domestic power supply. Voltagecan vary by ±6% of the rated voltage. For operation with different voltages, a suitably sizedauto-transformer must be used. The appliance...

17 Door reversal Unplug the appliance before all operations. To reverse the door, proceed as follows: 1. dismantle the lower hinge (3), pin (1) and the screw (2); 2. slide the door out from pin (D),unscrew the pin and reposition on the opposite side; 3. unscrew the left front foot and reposition on ...