Zanussi ZDV12004FA- Manuals

Page 3 - SAFETY INSTRUCTIONS

• Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. • Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. • Before any maintenance operation, deact...

Page 5 - CONTROL PANEL; PROGRAMMES

CONTROL PANEL 4 3 2 1 1 On/off button 2 Programme indicators 3 Indicators 4 Programme button INDICATORS End indicator.Salt indicator. It is always off while the programme operates. PROGRAMMES Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Wat...

Page 6 - SETTINGS

Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 4) All • Prewash 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With thi...

Page 8 - BEFORE FIRST USE

While the drying phase operates, the device opens the appliance door. The door is then kept ajar. While the appliance is in user mode, within about 5 seconds:1. Press the programme button twice. • The indicators and are on. • The indicator flashes. 2. Wait until the indicators and are off. • The ind...

Page 9 - DAILY USE

CAUTION! Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme immediately after filling the salt container. ADDING RINSE AID 2 1 4 3 2 1 A The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the ho...

Page 10 - HINTS AND TIPS

ADDING MULTI-TABLETS 2 1 20 30 • Do not fill the salt container and the rinse aid dispenser. • Set the rinse aid dispenser to the lowest position. SETTING AND STARTING A PROGRAMME Starting a programme1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure tha...

Page 12 - CARE AND CLEANING

CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS B A C • Make sure that there are n...

Page 13 - TROUBLESHOOTING

TROUBLESHOOTING If the appliance does not start or it stops during operation, before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. WARNING! Repairs not properly done may result in serious risk to the safety of ...

Page 16 - TECHNICAL INFORMATION; ENVIRONMENTAL CONCERNS

TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 446 / 818 - 898 / 550 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 9 Power consu...