Zanussi ZDV12001FA- Manuals

Page 2 - Children and vulnerable people safety

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 3Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 D...

Page 3 - Product description

change the fuse in the mains plug, use a 13amp ASTA (BS 1362) fuse. Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other resi- dential t...

Page 4 - Control panel; Programme indicators; Programmes

Control panel B A 2 1 3 4 1 On/off button 2 Programme indicators 3 Indicators 4 Programme button. Indicators Description End indicator. Salt indicator. This indicator is off while the programme operates. Programmes Programme 1) Degree of soil Type of load Programme pha- ses Duration (min) Energy (kW...

Page 5 - Options; Acoustic signals; Before first use; Adjusting the water softener

Options Acoustic signals The acoustic signals operate in these condi-tions: • When the programme is completed. • A malfunction occurs to the appliance. Factory setting: on.You can deactivate the acoustic signals. Deactivating the acoustic signals 1. Press the on/off button to activate the appli- anc...

Page 6 - Manual adjustment

Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 2 1) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 2 1) 7 23 - 28 ...

Page 7 - Filling the rinse aid dispenser; Only use rinse aid for; max; Daily use; • If the salt indicator is on, fill the salt con-

1 2 3 Put 1 litre of water inthe salt container (on-ly for the first time). 4 5 6 Filling the rinse aid dispenser Caution! Only use rinse aid for dishwashers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase,helps to dry the dishes without streaks and st...

Page 9 - Care and cleaning

detergent, rinse aid and dishwasher salt,do these steps: 1. Press the on/off button to activate the appli- ance. 2. Set the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4. Start the shortest programme with a rinsing phase, without de...

Page 10 - Troubleshooting

Cleaning the filters 1 C B A 2 3 To remove filters ( B ) and ( C ), turn the han- dle counterclockwiseand remove. Pullapart filter ( B ) and ( C ). Wash the filters with water. A 4 Remove filter ( A ). Wash the filter withwater. A D 5 Put filter ( A ) to its ini- tial position. Makesure that it asse...

Page 11 - Deactivate the appliance before; The washing results and drying results are not satisfactory

Alarm code Problem • The indicator of the set programme flashes contin- uously. • The end indicator flashes 3 times intermittently. The anti-flood device is on. Warning! Deactivate the appliance before you do the check. Problem Possible cause Possible solution The programme does notstart. The mains ...

Page 12 - Technical information

Problem Possible cause Possible solution Incorrect position of the items in thebaskets. Water could not wash allitems. Make sure that the position of theitems in the baskets is correct and thatthe water can easily wash all items. The spray arms could not turn freely. Make sure that the position of t...

Page 13 - Environment concerns; • Discard correctly the packaging material. Re-

Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 9 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumpti...