Zanussi ZDT110- Manuals

Water outlet hose connection The end of the drain hose can be connected in the followingways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special cu...

The control panel Description of the appliance 24 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket End of programme indicator light Washing p...

Programme selection/cancel button (CANCEL): the selection of a washing programme occurs by the means ofthis button, press it until the indicator light corresponding to thedesired washing programme illuminates (see "Washingprogrammes" chart). The end of programme indicator lightflashes.Once t...

Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...

Filling with dishwasher salt Only use salt specifically designed for use indishwashers.All other types of salt not specifically designed for use ina dishwasher, especially table salt, will damage the watersoftener.Only fill with salt just before starting one of the completewashing programmes. This w...

● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...

Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates,salad bowls, cutlery etc.Serving dishes and large lids should be arranged around theedge of the basket, ensuring that the spray arms can turn freely. The cutlery ...

Adjusting the height of the upper basket If washing very large plates you can load them in the lowerbasket after moving the upper basket to the higher position. To move to the higher position proceed asfollows: 1. Move the front runner stops (A) of the upper basket outwards and slide the basket out....

Detergent tablets Detergent tablets of different brands dissolve at differentspeeds. For this reason some detergent tablets cannotdissolve and develop their full cleaning power during shortprogrammes. Therefore please use long programmes whenusing detergent tablets, to ensure the complete removal of...

Washing programmes 32 (1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hi...

In this fully integrated appliance the controls are located on thetop of the door. When selecting a washing programme, thedoor needs to be slightly open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Setting and starting th...

Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutraldetergents. Never use abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinseaid dispensers are cle...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructionsgiven here, without calling out an engineer. Something not working 35 ...a fault code appears The dishwasher will not start or stops during operation and a sequence of inter...

...the wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arran...

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washingprogrammes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt andrinse aid respe...