Zanussi ZDT 5053- Manuals

"Programme selection/cancel" button: the selection of a washing programme occurs by the means of thisbutton, press it until the indicator light corresponding to thedesired washing programme illuminates (see "Washingprogrammes" chart). The END OF CYCLE indicator lightflashes.Once the ...

Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...

Filling with dishwasher salt Only use salt specifically designed for use indishwashers.All other types of salt not specifically designed for use ina dishwasher, especially table salt, will damage the watersoftener.Only fill with salt just before starting one of the completewashing programmes. This w...

● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...

The upper basket The upper basket is designed for plates (dessert plates,saucers, dinner plates of up to 24 cm in diameter), saladbowls, cups and glasses. Arrange items on andunderneath the cup racks sothat water can reach allsurfaces. Glasses with long stems canbe placed upside down in thecup racks...

Detergent tablets Detergent tablets of different brands dissolve at differentspeeds. For this reason some detergent tablets cannotdissolve and develop their full cleaning power during shortprogrammes. Therefore please use long programmes whenusing detergent tablets, to ensure the complete removal of...

(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres&#...

In this fully integrated appliance the controls are located on thetop of the door. When selecting a washing programme, thedoor needs to be slightly open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Setting and starting th...

Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutraldetergents. Never use abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinseaid dispensers are cle...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructionsgiven here, without calling out an engineer. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a ch...

In the event of your appliance requiring service, or if you wishto purchase spare parts please contact your local ServiceForce Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the ServiceForce centre covering your post code area. For the address of your local S...

Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date ofpurchase this Zanussi appliance or any part thereof is provedto be defective by reason only of faulty workmanship ormaterials, we will, at our option repair or replace the sameFREE OF CHARGE for labour, mater...

Any electrical and/or plumbing work required to installthis appliance should be carried out by a qualifiedelectrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and adrain. Building-in This dishwasher...

Water outlet hose connection The end of the drain hose can be connected in the followingways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special cu...

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washingprogrammes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt andrinse aid respe...