Page 2 - Contents; Technical specifications
Safety instructions 20 Disposal 20 Economical and ecological dishwashing 20 Installation instructions 21 Fitting under a counter 21 Levelling 21 Water supply connections 21 Water outlet hose connection 22 Electrical connection 22 Description of the appliance 23 The control panel 24 Prior to using fo...
Page 3 - Disposal; Safety instructions
It is most important that this instruction book should be retained with the appliance for future reference. Should theappliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure thatthe book is left with the appliance in order that the new owner...
Page 4 - Fitting under a counter; Installation instructions
Any electrical and/or plumbing work required to installthis appliance should be carried out by a qualifiedelectrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and adrain. Fitting under a counter (ki...
Page 5 - Water outlet hose connection; Electrical connection
Water outlet hose connection The end of the drain hose can be connected in the followingways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special cu...
Page 6 - Description of the appliance
Description of the appliance 23 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN154
Page 7 - The control panel
Programme selector dial and On/Off indicatorlight: the selection of a washing programme occurs by turning the programme selector dial clockwise or anticlockwise,until the desired washing programme (see "Washingprogrammes" chart) corresponds with the programme selectionmarker placed on the di...
Page 8 - The water softener; Prior to using for the first time
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...
Page 9 - Filling with dishwasher salt; Rinse aid
Filling with dishwasher salt Only use salt specifically designed for use indishwashers.All other types of salt not specifically designed for use ina dishwasher, especially table salt, will damage the watersoftener.Only fill with salt just before starting one of the completewashing programmes. This w...
Page 10 - In daily use
● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...
Page 11 - Use of detergent; Fill with detergent
The upper basket The upper basket is designed for plates (dessert plates,saucers, dinner plates of up to 24 cm in diameter), saladbowls, cups and glasses. Arrange items on andunderneath the cup racks sothat water can reach allsurfaces. Glasses with long stems canbe placed upside down in thecup racks...
Page 12 - General advice; Special advice; Different kinds of detergent
Detergent tablets Detergent tablets of different brands dissolve at differentspeeds. For this reason some detergent tablets cannotdissolve and develop their full cleaning power during shortprogrammes. Therefore please use long programmes whenusing detergent tablets, to ensure the complete removal of...
Page 13 - Washing programmes
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres...
Page 14 - To cancel a delay start in progress; Starting a washing programme
1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Setting and starting the programme Turn the programme selector dial until the marker on the dial corresponds with the desired programme (see "Wa...
Page 15 - Cleaning the filters; Prolonged periods of non-operation; Frost precautions; Maintenance and cleaning
Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutraldetergents. Never use abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinseaid dispensers are cle...
Page 17 - Service and spare parts
...the wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arran...
Page 18 - Hints for test centres
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washingprogrammes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt andrinse aid respe...