Zanussi ZDI 100- Manuals

5 WASH Indicator lights END Illuminates when the washing and rinsing phases are running. Illuminates when a washing programme has ended. Switch of the dishwasher by returning the programme selector dial to theOff position. The On/Off indicator light turns off.It also has added functions of visual si...

6 Programme Half load Use Cycle description Intensive 65°C Heavy soil. Prewash - Main wash Yes * Crockery, cutlery, 2 intermediate rinses - pots and pans Final rinse - Dry Rinse and Hold Any. Prewash Partial load (to be completed No later in the day). This programme does not require the use of deter...

7 Before the first use When using separately special (dishwasher)salt, rinse aid and detergent: - set the water softener- add special salt- fill up with rinse aid When using tablets that integrate rinse aid and detergent: there is no need to fill up with rinse aid- set the water softener- add specia...

8 The water softener is factory set at position 2. Setting the water softener manually (see table) Set switch to position 1 or 2 Water hardness Adjustment of the water hardness setting in °dH 1) in mmol/l 2) Range manually electronically 51 - 70 9,0 - 12,5 IV 2 level 10 43 - 50 7,6 - 8,9 IV 2 level ...

9 Setting the water softener electronically (see table) Release the button. The END indicator light will flash. The number of flashes corresponds to current level set.The END indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds. To change the level, press the st...

10 Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Immediately start a complete programme. IMPORTANT! The salt container will require topping up periodically. Filling with rinse aid Open the lid. Fill up with rinse aid. The maximum level...

11 Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level. (The dose is factory set in posi...

12 Load cutlery. For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it). Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury! Load the lower basket. Arrange serving dishe...

13 Filling with detergent Open the lid. Fill in the detergent in compartment A. Observe the dosing levels. IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. For programmes with prewash add an additional detergent dose in compartme...

14 Unloading the dishwasher ● Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ● Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishe...

15 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rin...

16 Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwash...

17 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to wrong arrang...

19 Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. WARNING! The dishwasher must not be connected to open water appliances or instantaneous water heaters. This dishwasher ...

20 CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Ensure that the hoses are not kinked, crushed or entangled. Drain hose - Connect drain hose to the sink. Secure it with...

22 European Guarantee This appliance is guaranteed by Electrolux ineach of the countries listed below for theperiod specified in the appliance guarantee orotherwise by law. If you move from one ofthese countries to another of the countrieslisted below the appliance guarantee will movewith you subjec...

5 WASH Indicator lights END Illuminates when the washing and rinsing phases are running. Illuminates when a washing programme has ended. Switch of the dishwasher by returning the programme selector dial to theOff position. The On/Off indicator light turns off.It also has added functions of visual si...

6 Programme Half load Use Cycle description Intensive 65°C Heavy soil. Prewash - Main wash Yes * Crockery, cutlery, 2 intermediate rinses - pots and pans Final rinse - Dry Rinse and Hold Any. Prewash Partial load (to be completed No later in the day). This programme does not require the use of deter...

7 Before the first use When using separately special (dishwasher)salt, rinse aid and detergent: - set the water softener- add special salt- fill up with rinse aid When using tablets that integrate rinse aid and detergent: there is no need to fill up with rinse aid- set the water softener- add specia...

8 The water softener is factory set at position 2. Setting the water softener manually (see table) Set switch to position 1 or 2 Water hardness Adjustment of the water hardness setting in °dH 1) in mmol/l 2) Range manually electronically 51 - 70 9,0 - 12,5 IV 2 level 10 43 - 50 7,6 - 8,9 IV 2 level ...

9 Setting the water softener electronically (see table) Release the button. The END indicator light will flash. The number of flashes corresponds to current level set.The END indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds. To change the level, press the st...

10 Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Immediately start a complete programme. IMPORTANT! The salt container will require topping up periodically. Filling with rinse aid Open the lid. Fill up with rinse aid. The maximum level...

11 Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level. (The dose is factory set in posi...

12 Load cutlery. For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it). Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury! Load the lower basket. Arrange serving dishe...

13 Filling with detergent Open the lid. Fill in the detergent in compartment A. Observe the dosing levels. IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. For programmes with prewash add an additional detergent dose in compartme...

14 Unloading the dishwasher ● Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ● Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishe...

15 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rin...

16 Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwash...

17 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to wrong arrang...

19 Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. WARNING! The dishwasher must not be connected to open water appliances or instantaneous water heaters. This dishwasher ...

20 CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Ensure that the hoses are not kinked, crushed or entangled. Drain hose - Connect drain hose to the sink. Secure it with...

22 European Guarantee This appliance is guaranteed by Electrolux ineach of the countries listed below for theperiod specified in the appliance guarantee orotherwise by law. If you move from one ofthese countries to another of the countrieslisted below the appliance guarantee will movewith you subjec...