Zanussi ZDF3020X- Manuals

Washing programmes Washing programmes Programme and programme knob position Degree of soil Type of load Programme description 1) Any Crockery, cutlery, pots and pans Prewash Main wash up to 45°C or 70°C 1 or 2 intermediate rinses Final rinse Drying Heavy soil Crockery, cutlery, pots and pans Prewash...

The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of pro- cedure:1. Make a check if the water softener level is correct for the water hardness in your ...

1 2 Set switch to position 1 or 2. Electronic adjustment The water softener is set at the factory at level 5. The appliance must be switched off. 1. Press and hold the start/cancel button. Turn the pro- gramme knob counterclockwise until the programme marker agrees with the first washing programme o...

Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: 1 2 M A X 1 2 3 4 + 3 4 Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the ap- plia...

1 Arrange service dishes and large lids around the edge of the lower basket. 2 3 The rows of prongs in the lower basket can be flat to load pots, pans and bowls. 1 2 Use the cutlery grid. If the dimensions of the cutlery prevent use of the cutlery grid, remove it. 1 Arrange the items to let water to...

Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing pro- gramme, then set the programme again.To activate the multitab function:• Press the multitab button. The m...

Cancelling a washing programme • Press and hold the start/cancel button. – In the digital display the time duration of the pro- gramme flashes. – One or more phase indicator lights are on. The washing programme is cancelled. At this time you can do these steps:1. Switch off the appliance.2. Set a ne...

3 To remove filters B and C, turn the handle approxi- mately 1/4 anticlockwise. 4 Remove the flat filter A from the bottom of the ap- pliance. 5 Put the flat filter A in the bottom of the appliance. Install the flat filter cor- rectly under the two guides D. 6 Put the filter system in po- sition. To...

The cleaning results are not satisfactory Dry water drop signs on glasses and dishes • Increase rinse aid dosage.• The detergent can be the cause. Technical data Dimensions Width cm 60 Height cm 85 Depth cm 61 Electrical connection - Voltage - Overall power - Fuse Information on the electrical conne...

1 2 3 4 Install the appliance worktop to the appliance if you want to use the dishwasher as a freestanding appliance. The plinth on freestanding appliance is not adjustable. Adjusting the level of the appliance Make sure that the appliance is level to close and seal the door correctly. If the level ...

If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a block- age in the drain hose spigot. Caution! Make sure that the water couplings are tight to prevent water leakage. Electrical connecti...