Zanussi ZDF22002WA- Manuals

Page 3 - SAFETY INSTRUCTIONS

• Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. • Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. • Before any maintenance operation, deact...

Page 5 - EASY START

EASY START 1 2 3 4 5 6 1 On/off indicator 2 Programme marker 3 Indicators 4 Start button 5 Delay button 6 Programme knob INDICATORS End indicator.Salt indicator. It is always off while the programme operates.Rinse aid indicator. It is always off while the programme operates. 5

Page 6 - PROGRAMMES

PROGRAMMES Programme Degree of soil Type of load Programme phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 2) Normal soil Crockery and cutlery • Pre-wash • Wash 50 °C • Rinses • Dry 227 1.039 11 Heavy soil Crockery, cut- lery, pots and pans • Pre-wash • Wash 70 °C • Rinses • Dry 1...

Page 7 - SETTINGS

SETTINGS ADJUSTING THE WATER SOFTENER 5x 6x The programme marker must be in position.1. Press and hold and simultaneously turn the knob counterclockwise until the programme marker is in position. 2. Release when and Delay start to flash. • The current setting is indicated by the number of flashes of...

Page 9 - BEFORE FIRST USE

The programme marker must be in position.1. Press and hold and simultaneously turn the knob counterclockwise until the programme marker is in position. 2. Release when and Delay start to flash.3. Turn the knob counterclockwise until the programme marker is in position. • The indicator is on = AirDry...

Page 10 - DAILY USE

ADDING RINSE AID 2 1 4 3 2 1 The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. DAILY USE 1. Open the water tap. 2. Set the correct programme for the type of load and the degree of soil. Make sure that the appliance is in Progra...

Page 13 - HINTS AND TIPS

The indicator is on. After 5 minutes of non-use, the appliance enters standby mode and all the indicators are off. It decreases energy consumption.1. Turn the knob to . 2. Close the tap. HINTS AND TIPS GENERALThe following hints will ensure optimal cleaning and drying results in daily use and also h...

Page 14 - TROUBLESHOOTING

LOADING THE BASKETS• Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • M...

Page 17 - CARE AND CLEANING

Problem Possible cause and solution Limescale deposits on the table- ware, on the tub and on the in- side of the door. • The level of salt is low, check the refill indicator. • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener". • Even using multi...

Page 18 - TECHNICAL INFORMATION

• Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides. • Reassemble the filters (A) and (B). • Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and dama...

Page 19 - ENVIRONMENTAL CONCERNS

ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. R...