Zanussi ZDE47200W- Manuals

Page 2 - General safety

Contents Important safety information _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Sorting and preparing laundry _ _ _ _ _ _ _ _ _ _ _ _ 5 Programme...

Page 5 - Sorting laundry; Type of laundry

1 Programme knob and - OFF switch 2 Function buttons (from left to right:) DELICATE , TEXTILE 3 Programme phase lights (from up to down:) - DRYING light - END/ANTI-CREASE light 4 START PAUSE button 5 FILTER light Before first use In order to remove any residues which may have been produced during pr...

Page 6 - Programme chart; Programmes

Programme chart Programmes Time in mi- nutes (about) max . l oa d (weight wh en dry ) Application/properties Care mark COTTON EXTRA DRY A 1) 7 kg Thorough drying of thick or multi- layered fabrics, e.g. terry towelling items, bathrobes. COTTON STRONG DRY 125 7 kg Thorough drying of thick or multi- l...

Page 7 - Daily use; Switching machine on

Programmes Time in mi- nutes (about) max . l oa d (weight wh en dry ) Application/properties Care mark SPECIAL COOL- ING A 1) 7 kg Special programme, lasting around 10 minutes, for re- freshing or gently cleaning textiles with commercially available dry cleaning sets. (Only use those products which ...

Page 8 - Cleaning and maintenance; Cleaning fluff filter

3 1 2 5 6 4 Selecting additional functions You can choose from the additional functions: button 1 - DELICATE button 2 - TEXTILE DELICATEgentle drying with reduced heat of sensitive fabrics and temperature-sensitive textiles (e.g. acrylic, viscose)marked on care label with: TEXTILEPress the Textile b...

Page 9 - Problem

1. Open loading door and remove laundry. 2. Remove the filter which is built into the lower part of the loading aper- ture. 3. Open the filter pressing the but- ton, among two slots on fingers. Clean the filter using dump hand or cloth. After a period of time, a patina due to de- tergent residue on ...

Page 10 - Machine settings

Problem Possible cause Remedy Conductance of water at installation site differs from standard setting ofmachine. 1) Re-programme standard setting for degree of drying (see ‘Machine set-tings’ chapter) 1) . To little free space around the appli- ance Ensure min. 5cm free space around the appliance Lo...

Page 11 - Installation; Appliance positioning

permitted ambient temperature + 5°C to + 35°C 1) 7 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121 Installation Appliance positioning • It is recommended that, for your convenience, the ap- pliance is positioned close to your washing machine. • The tumble dryer must be installed in ...

Page 12 - Electrical connection

point of the hose and to place a small container below it. (See picture, point B). Once connected to the dryer, run the vent hose to the de- sired outlet point, ensuring that the run’s overall length is less than 2 m, and that it contains no more than two bends. As to the outlet itself, if you have ...

Page 13 - Environment; Packaging material; Service

3 mm between the switch contacts and of a type suitable for the required load in compliance with the current elec- trical regulations. The switch must not break the yellow and green earth ca- ble at any point. Door reversal To make it easier to load or unload the laundry, the door can be reversed. T...

Page 14 - we recommend that you write them in here:

we recommend that you write them in here: Model description: ................................................................................. PNC: ................................................................................. S No.: ..................................................................