Zanussi ZCF 106 A - Manuals

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

2 Prior to Installation Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer. Installation This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specification...

Page 3 - Contents

3 Instructions for the User Important Safety Information 2 Description of the Appliance 4 Control Panel 4 Operation Before use 5 Starting the Appliance 5 Alarm light 5 Temperature Control 5 Opening/Closing the Lid 5 The role of the pressure equalisation valve 6 Freezing Fresh Food 6 Frozen Food Stor...

Page 5 - Operation

5 Before Use Remove all packaging and securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5m1 to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Starting the Appliance Insert the plug into the wall socket. The green pilot ...

Page 6 - Freezing Fresh Food; Frozen Food Storage; FREEZING

6 THE ROLE OF THE PRESSURE EQUALISATION VALVE The pressure equalisation valve installed in your freezer automatically eliminates the pressure difference which otherwise would make it very difficult or even impossible to open the lid.It may be possible to hear the operation of the valve as the air fl...

Page 7 - Baskets

7 Therefore you should avoid installing your freezer in very humid surroundings. The LOW FROST system minimizes the amount of ice caused by the natural temperature cycle of the freezer. However, ice-build-up from other sources is not reduced. The most important other sources are poorly wrapped food ...

Page 10 - Maintenance and Cleaning

10 Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply Internal Cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER use detergents, abrasive powders,...

Page 11 - Something not Working

11 Something not Working Before: contacting your local Service Force Centre check the following point. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. If afte...

Page 12 - Service and Spare Parts; Customer Care Department

12 Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area...

Page 13 - Guarantee Conditions

13 Guarantee Conditions We, Zanussi undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF CHARGE for lab...

Page 14 - Positioning; Technical Specifications

14 Positioning Place the freezer horizontally on a firm surface, resting on all four wheels. Use a wooden block or similar object to compensate for any bumps/holes in the floor's surface.The room should be dry and adequately ventilated.If the room temperature exceeds 32°C, or falls below freezing po...

Page 15 - Electrical Connection

15 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed.Electrical Requirements Before switching on, make sure t...