Zanussi WJD 1667 W- Manuals

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control Panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet Door locked light It stays on during the whole programme indicating thatthe door is locked.When the light goes out, the door can be opened (seepage 13). De...

Maximum temperatures are 90°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool andfabrics to be hand-washed (HAND WASHprogramme). Important! By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously for 3 seconds, the acousticsignal is deactivated at the end of the cyc...

9 10 START/PAUSE button This button has three functions: • Start : after you have selected the desired programme and options, press this button to start the machine. Thelight above the button will stop flashing and remain lit. If you have selected a delay time by means of button12, the countdown wil...

10 12 DELAY START button This button makes it possible to delay the starting of theprogramme by up to 24 hours. The delay you haveselected is shown on the display for about 3 seconds;afterwards, the duration of the programme reappears.You must select this option after you have set the programme and ...

11 Operating Sequence WASHING Before the first wash, we recommend that you run acotton cycle at 60°C, without any laundry in themachine, to remove any manufacturing residue from thedrum and tub.Pour 1/2 a measure of detergent into the dispenserdrawer and start the machine. 1.Load the laundry Open th...

13 If it is necessary to drain the water in order to changethe programme in progress, proceed as follows: • PAUSE the machine by pressing the START/PAUSE button; • press the SKIP/RESET button repeatedly, until only the DRAIN light remains lit; • press the START/PAUSE button again. When the water has...

15 Washing and Drying Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 ...

17 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

18 Washing programmes The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, incompliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the...

19 Drying Programmes (*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, incompliance with EC directive 92/75. Timed drying Degree of drying Store dry (*)Suitable for itemsto put awaywithout ironing Type of fabric Cotton and linen(towels, T-shirts,bath...

20 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any laun...

21 The dangers of freezing If the machine is exposed to temperatures below 0°C,certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Unhook the drain hose from the rear support andposition the end of this hose and that of the inlethoses in a bowl. Run the drainin...

22 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listedbelow. IMPORTANT: if you call out an engineer to a fault list...

23 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door. ● The machine is heating the water or drying the clothes. ● The drum is turning. The door can only be opened when the relevant light has gone out. Spinning starts late or the machinedoes not spi...

24 Guarantee Conditions Standard guarantee conditions We, Zanussi Electrolux, undertake that if, within 12months of the date of the purchase, this ZANUSSIELECTROLUX appliance or any part thereof is provedto be defective by reason only of faulty workmanship ormaterials, we will, at our option repair ...

27 Water inlet Connect the hose supplied with the machine to a tapwith a 3/4” thread. Do not use already employed hoses. Installation should comply with local water authorityand building regulations’ requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 50...

28 If you intend the drain hose to empty into a sink, makesure that the sink is empty and the plug hole is notblocked. Use the plastic “U-Piece” supplied. Important Before connecting up the machine to new pipework orto pipework that has not been used for some time, runoff a reasonable amount of wate...

29 Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BEEARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make su...

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control Panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet Door locked light It stays on during the whole programme indicating thatthe door is locked.When the light goes out, the door can be opened (seepage 13). De...

Maximum temperatures are 90°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool andfabrics to be hand-washed (HAND WASHprogramme). Important! By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously for 3 seconds, the acousticsignal is deactivated at the end of the cyc...

9 10 START/PAUSE button This button has three functions: • Start : after you have selected the desired programme and options, press this button to start the machine. Thelight above the button will stop flashing and remain lit. If you have selected a delay time by means of button12, the countdown wil...

10 12 DELAY START button This button makes it possible to delay the starting of theprogramme by up to 24 hours. The delay you haveselected is shown on the display for about 3 seconds;afterwards, the duration of the programme reappears.You must select this option after you have set the programme and ...

11 Operating Sequence WASHING Before the first wash, we recommend that you run acotton cycle at 60°C, without any laundry in themachine, to remove any manufacturing residue from thedrum and tub.Pour 1/2 a measure of detergent into the dispenserdrawer and start the machine. 1.Load the laundry Open th...

13 If it is necessary to drain the water in order to changethe programme in progress, proceed as follows: • PAUSE the machine by pressing the START/PAUSE button; • press the SKIP/RESET button repeatedly, until only the DRAIN light remains lit; • press the START/PAUSE button again. When the water has...

15 Washing and Drying Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 ...

17 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

18 Washing programmes The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, incompliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the...

19 Drying Programmes (*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, incompliance with EC directive 92/75. Timed drying Degree of drying Store dry (*)Suitable for itemsto put awaywithout ironing Type of fabric Cotton and linen(towels, T-shirts,bath...

20 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any laun...

21 The dangers of freezing If the machine is exposed to temperatures below 0°C,certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Unhook the drain hose from the rear support andposition the end of this hose and that of the inlethoses in a bowl. Run the drainin...

22 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listedbelow. IMPORTANT: if you call out an engineer to a fault list...

23 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door. ● The machine is heating the water or drying the clothes. ● The drum is turning. The door can only be opened when the relevant light has gone out. Spinning starts late or the machinedoes not spi...

24 Guarantee Conditions Standard guarantee conditions We, Zanussi Electrolux, undertake that if, within 12months of the date of the purchase, this ZANUSSIELECTROLUX appliance or any part thereof is provedto be defective by reason only of faulty workmanship ormaterials, we will, at our option repair ...

27 Water inlet Connect the hose supplied with the machine to a tapwith a 3/4” thread. Do not use already employed hoses. Installation should comply with local water authorityand building regulations’ requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 50...

28 If you intend the drain hose to empty into a sink, makesure that the sink is empty and the plug hole is notblocked. Use the plastic “U-Piece” supplied. Important Before connecting up the machine to new pipework orto pipework that has not been used for some time, runoff a reasonable amount of wate...

29 Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BEEARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make su...