Zanussi FV825N- Manuals

ENGLISH 5 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so thatthey can be refitted if the machine ever has to betransported again. 1. Using a spanner, unscrew and remove the two rear bottom screws. Slide out the two p...

6 The other end of the inlet hose which connects to themachine can be turned in any direction. Simplyloosen the fitting, rotate the hose and retighten thefitting, making sure there are no water leaks. The inlet hose must not be lengthened. If it is tooshort and you do not wish to move the tap, you w...

ENGLISH 7 This new machine meets all modern requirements for effective treatment of laundry with low water, energy anddetergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. • The automatic cooling of the washing water from 95° ...

8 Use 1 Detergent dispenser drawer 2 ON/OFF button By depressing this button the machine is switchedon. By depressing it again the machine is switchedoff. 3 Mains on light This light is on whilst the machine is operating andgoes out at the end of the programme. 4 Spin suppression button Depress this...

ENGLISH 9 Washing hints Sorting the laundry Follow the wash code symbols on each garmentlabel and the manufacturer’s washing instructions.Sort the laundry as follows:whites, coloureds, synthetics, delicates, woollens. Temperatures 95° for normally soiled white cottons and linen(e.g. tea cloths, towe...

ENGLISH 11 4. Select the desired option Depress the required button. 5. Select the temperature Turn the dial to the required setting. 6. Select the programme and start the machine Turn the programme selector dial clockwise to the required programme and press ON/OFF button : the mains on light comes ...

12 7. At the end of the programme The machine stops automatically. The mains on lightgoes out. If you have selected a programme which ends withthe water of the last rinse left in the tub (button depressed), drain the water before opening the door. Wait approx. two minutes before opening the door tog...

ENGLISH 13 Programme table Washing programmes for cotton and linen Max. load: 4 kg The temperatures indicated are the optimum temperatures for each programme and depend on the type oflaundry and degree of soiling. In compliance with EC directive 92/75, the consumption figures indicated on the energy...

14 Programme table The temperatures indicated are the optimum temperatures for each programme and depend on the type oflaundry and degree of soiling. Washing programmes for synthetics, mixed fabrics, delicates and wool Max. load: 1.5 kg, wool 1 kg Progr. Temp. Type of laundry Cycle description Possi...

ENGLISH 15 Bodywork Clean the outside of the machine with soap andwater only. Rinse with clean water and dry with a softcloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. Door seal Check from time to time the door seal and eliminateeventual possible ...

16 • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump fully in.• Close the pump door. Water inlet filter If you notice that the machine is taking longer to fill,check that the filter in the water inlet hose is notblocked. Turn off the water tap....

ENGLISH 17 Something not working? Problems which you can resolve yourself. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. • The main fuse has blown. • The programme selector dial is not posi...

18 If you are unable to identify or solve the problem,contact our service centre. Before telephoning, makea note of the model, serial number and purchasedate of your machine: the Service Centre will requirethis information. Mod. .......... Prod. No. ........... Ser. No. ......... M od . ... ..... .....