Zanussi FL 12 - Manuals

5 Description of the Appliance 1 Detergent dispenser drawer 2 “Memory” buttons 3 “ON/OFF-Cancel” button 4 “Fabrics” button 5 “Temperature” button 6 “Spin speed” button 7 “Options” button 8 “Special Programmes” button 9 “Freshen up” button 10 “Time to finish” display 11 “Delay start” button 12 “START...

6 The Control Panel 1 “Memory” buttons andcorresponding pilot lights A wash programme can be stored and recalled bypressing these buttons. To store: select the required programme using thevarious buttons available (see section “Operatingsequence”), then start the machine by pressing theSTART/PAUSE b...

8 7 “Special Programmes” button Pressing this button selects the following options: - EXTRA RINSE: can be selected with allprogrammes except the wool programme. Themachine carries out 4 rinses instead of 3.This option is recommended for people who aresensitive to detergents and in areas where the wa...

9 10 START/PAUSE button This button has three functions: a) Start After having selected the required wash programme,press this button to start the machine; the display stopsflashing. b) Pause To interrupt a programme which is running, press theSTART/PAUSE button: the figures displayed will startto f...

10 Operating Sequence Before your first wash, we recommend that you run acotton cycle at 60°C, without any laundry in themachine, to remove any manufacturing residue from thedrum and tub.Pour 1/2 a measure of detergent into the dispenserdrawer and start the machine. 1. Load the laundry Open the door...

13 Washing Hints i Do NOT overload the machine. Weigh the laundry thefirst few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 g Linen ha...

15 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

16 Washing Programmes Fabrics White cottonECONOMY Temperature Wash programme Additional functions Max. load Progr. time mins 95° (60°) White cotton economy,for example lightly soiledsheets and householdlinen. EXTRA RINSESPIN SPEEDRINSE HOLD 5 .0 kg (FL 15) 4.5 kg (FL 12) 5 .0 kg (FL 15) 4.5 kg (FL 1...

17 Special Programmes Programme Rinses Type of laundry Additional functions Max. load Progr. time mins This programme can beused for rinsing handwashed garments. SPIN SPEEDRINSE HOLDEXTRA RINSE 5 .0 kg (FL 15) 4.5 kg (FL 12) Spin Separate spin for allfabrics SPIN SPEED 5 .0 kg (FL 15) 4.5 kg (FL 12)...

18 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricitysupply. Descaling The water we normally use contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any laund...

19 Cleaning the filter The water drain filter A clean filter is important for the correct functioning ofthe machine, and should therefore be cleaned after everywashing programme. Open the filter door and place a container underneath tocatch any spillage. If the filter is blocked and themachine is un...

20 Something Not Working In the event of operating problems, you are advised to read the following chart carefully before calling the servicecentre. The following alarm codes may be displayed: - E00: problem with the water supply - E10: problem with water draining - E20: door open Once the problem h...

21 Symptom The door will not open Possible causes ■ The programme is still running. ■ The door lock has not yet released (door pilot light on). ■ The water level in the drum is too high or the machine is heating. Spinning starts late or the machinedoes not spin ■ The electronic unbalance detection d...

22 Peace of Mind for Twelve Months Standard guarantee conditions We, Zanussi Limited undertake that if, within 12 monthsof the date of the purchase, this Zanussi appliance orany part thereof is proved to be defective by reason onlyof faulty workmanship or materials, we will, at ouroption, repair or ...

24 Unpacking All transit bolts and packing must be removed before using the appliance. Before starting the machine up, the packing must beremoved as follows. You are advised to keep all the packaging for re-use incase the machine is to be transported again. Using a spanner unscrew and remove the rea...

26 Important Before connecting up the machine to new pipework orto pipework that has not been used for some time, runoff a reasonable amount of water to flush out any debristhat may have collected in the pipes. Levelling Level the washing machine by raising or lowering thefeet. The feet may be tight...

27 Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make s...