Yamaha XJ750- Manuals

2 INCLUDED IN YOUR KIT: A) Sensor Bypass Device B) Male bullet terminal to replace a missing terminal on the main harness, if needed C) Small section of heatshrink tubing (if you need to use the bullet terminal) D) Quick splice connector E) Female spade lug F) 2 zip ties Items D) and E) allow you to...

3 Clean all connection surfaces with fine sandpaper. If you find your battery terminals are covered with some kind of protective grease, you must clean and remove all of this material before re-attaching any wires. Then re-apply a protective grease or similar product, if desired, when you're finishe...

4 Positive terminal… …or starter solenoid. You decide. Either way, you can use the included zip ties to bundle the wiring together and tuck it up underneath the frame so it sits behind/on top of the airbox, out of the way. AFTER YOU’RE DONE : The original sensor and this sensor bypass device is not ...