Yamaha PJP-100H - Manuals

1 PRE P ARA T ION IN TRODUC TI ON B A SIC CALL OPERA T IONS CONF IGUR A T IO NS ADDITIONAL INF O RMA T ION English Features .................................................................. 2Supplied Accessories ............................................. 3Controls and Functions ....................

FEATURES 2 This unit is an IP audio conference system that enables simultaneous talk between multiple locations (up to 4 locations for the mesh connection and up to 8 locations for the cascade connection) through networks including the Internet and corporate LAN. Audio conference through networks Au...

3 Supplied Accessories IN TRODUC TI ON English ■ About this manual • In this manual, the names of the following products are described as follows. – Yamaha PJP-100H: this unit– Yamaha IP Audio Conference System: PJP– Microsoft ® Windows ® : Windows – Microsoft ® Windows XP ® : Windows XP – 10BASE-T ...

CONTROLS AND FUNCTIONS 4 ■ Top panel 1 Microphone indicators A blue LED lights to indicate the audio pick up area. 2 Display The LCD shows the current status of this unit (page 7). 3 (Cancel) Press the key to cancel a setting without saving it or to return to the previous page. 4 / (Up/Down) Press e...

5 Controls and Functions IN TRODUC TI ON English ■ Right side panel 1 DC IN 12V terminal Connect the provided AC adapter. 2 AUDIO IN terminal Connect to the line output of an audio equipment or PC. 3 AUDIO OUT terminal Connect to the line input of an audio equipment or PC. Connecting this terminal t...

6 Controls and Functions ■ Other 1 Serial label The label carries the following information.• MODEL No. : Model number of this unit. • SER. : Serial number for use in management/ distinction of this unit. 2 SERIAL terminal Reserved for future extension. 3 Arrayed speakers (Bottom panel) Twelve speak...

7 Controls and Functions IN TRODUC TI ON English ■ Display 1 Calling method indicator The indicator shows the connection method used for the current call. • Call by designating the IP address. • Call using a SIP server. 2 IP address The IP address of this unit is displayed. 3 Connection mode indicat...

PREPARATION PROCEDURE 8 The following preparation steps should be completed before using this unit. Step 1: (page 9)Connecting this unit to the network and turning this unit on ↓ Step 2: (page 10)Registering the network settings of this unit The setting method is variable depending on whether or not...

Preparation Procedure 9 PRE P ARA T ION English Follow the procedure below to connect this unit to the network, and then connect the AC adapter. 1 Using a LAN cable, connect the LAN port of this unit to the network. 2 Connect the AC adapter to the DC IN 12V terminal. 3 Connect the power cable to the...

Preparation Procedure 10 Register the IP address and subnet mask of this unit, and the default gateway and DNS server used by it according to the environment of the LAN in which this unit is accommodated. The operation is different depending on whether or not the DHCP server is used. Set a unique IP...

Preparation Procedure 11 PRE P ARA T ION English ■ Assigning the IP address manually Follow the procedure below to register the network information manually. Before setting the network information, check that this unit is connected properly to the network. If the disconnected icon (page 10) is displ...

Preparation Procedure 12 5 Press or to select “5. DHCP”, and then press . The “DHCP” menu appears. 6 Press or to select “2. Disable”, and then press . The “Network Settings” menu reappears. 7 Press or to select “1. IP Address”, and then press . The “IP Address” menu appears. 8 Use the numeric keys t...

Preparation Procedure 13 PRE P ARA T ION English 11 Press or to select “3. Default Gateway”, and then press . The “Default Gateway” menu appears. 12 Use the numeric keys to enter the “Default Gateway” of this unit, and then press . The entered “Default Gateway” is registered and the “Network Setting...

Preparation Procedure 14 After completing the settings, follow the procedure below to install this unit in the place of conference, such as a conference room. ■ About installation environment The speakers of this unit are attached in the downward orientation on the bottom panel. Place this unit hori...

Making a Call 15 B A SIC CALL OPERA T IONS English Follow the procedure below to specify an IP address to call another unit. Both PJP units should be turned on and connected to the network with a LAN cable. 1 Press repeatedly until the initial display appears. 2 Use the numeric keys to enter the IP ...

Making a Call 16 The following display appears if the call is connected by pressing on the destination unit and conversation becomes available. • Do not disconnect the LAN cable or power cable during a call. Doing so may cause malfunction. • If the call failed, check the following. – The destination...

Making a Call 19 B A SIC CALL OPERA T IONS English 3 Press or to select the destination unit, and then press . The calling display appears. The IP addresses of this unit and destination unit appear if the call is connected by pressing on the destination unit and conversation becomes available.To adj...

Answering a Call 20 Follow the procedure below to answer a call from another unit. 1 While having an incoming call, press . When there is an incoming call, the back light of the display lights up and the ringing tone is generated.The display shows the IP address of the unit calling this unit. y If t...

Talking with Multiple Locations 21 B A SIC CALL OPERA T IONS English This unit is designed to enable a conference call between up to 4 locations (with the mesh connection). It is also possible to call a new location (branch office or department) during a call. To establish a call involving multiple ...

Talking with Multiple Locations 22 The information display and speaker output method are variable depending on the settings in “Connection Mode” (page 27) and “Speaker Mode” (page 29). ■ When “Speaker Mode” is set to “Divide” The audio from each location is output from a different position. , and di...

CONFIGURING SETTINGS 24 You can configure the settings of this unit using the operation keys on this unit or the web browser (web menu) on the PC connected to this unit. • Some settings such as registering the names of this unit or the SIP server are available only with the web menu.• See “Setting M...

25 Configuring Settings CONF IGUR A T IO NS English 4 Change the parameter. The following figure shows an example in which “1. IP Address” is selected. For details on parameters of each menu item, see “Setting Menu List” (page 26). 5 To confirm the setting, press . The setting is saved in this unit....

SETTING MENU LIST 26 This section describes the setting menu items available with this unit. In the following description, indicates that the setting is possible using the keys on this unit and indicates that it is possible using the web menu through a PC. ■ Managing the address book You can check t...

27 Setting Menu List CONF IGUR A T IO NS English ■ Configuring the DHCP server settings Select “Enable” to assign the network information of this unit using the DHCP server or “Disable” to assign the network information manually. The default setting is “Enable”. Using the keys on this unit In the in...

28 Setting Menu List ■ Selecting the audio pickup area (microphone mode) You can select the audio pickup area of the microphone during call. The default setting is “Zone”.• Zone : Pick up the audio in large area not only tracking the audio of the talker. It is suitable for the relatively quiet envir...

29 Setting Menu List CONF IGUR A T IO NS English To specify the area to which this feature is available, use the numeric keys in “Microphone Mode” menu. According to the pressed keys, audio in the area of the following figure is picked up or not. Microphone indicators (blue LED) of which direction a...

30 Setting Menu List Using the keys on this unit In the initial display, select “Menu” → “Settings” → “Sound Settings” → “Speaker Mode”. y You can display “Speaker Mode” menu by pressing continuously in the initial display or calling display. Using the web menu In the web menu, select “Speaker Mode”...

31 Setting Menu List CONF IGUR A T IO NS English ■ Configuring the codec You can select a codec from the following options. • G.711 Extension • G.711 µ-law • G.726-40 • G.726-32 • G.726-24 See “Specifications” (page 53) for details about the frequency response and the transmission bandwidth for each...

32 Setting Menu List ■ Downloading the call history of this unit The call history of this unit can be downloaded as a TSV file. See “Managing the Call History” (page 38) for details. Using the web menu In the web menu, select “Download Call History”. ■ Setting password for the web menu You can prote...

33 CONF IGUR A T IO NS English You can register up to 16 PJP units in the address book of this unit. The address book can be used to select and call a unit (page 17). To register new PJP units or edit the registered information, use the web menu. 1 In the web menu, click “View/Edit Address Book”. Th...

34 Editing Address Book 1 In the web menu, click “View/Edit Address Book”. The “Address Book” window appears. 2 From the address list, click “Edit” for the address you want to edit. The “Edit Address” window appears. 3 Edit the information of the selected address, and then click “Register”. The upda...

35 CONF IGUR A T IO NS English When this unit is used in an environment with a SIP server, the address of the SIP server to be referenced by this unit and the SIP address of this unit should be registered. If password authentication is required for accessing the desired SIP server, it is also necess...

36 Using the SIP Server ■ Calling another unit by dialing the user ID You can call another unit by dialing the user ID if it consists of only the numbers. Example: SIP address of this unit is [email protected], and another unit is [email protected] You can call another unit only by dialing “201”. • You ...

37 CONF IGUR A T IO NS English The SNTP server (time distribution server) enables to adjust the date and time information in this unit automatically at constant intervals. • The date and time of this unit cannot be adjusted without a SNTP server. In this case, note that the downloaded call history (...

MANAGING THE CALL HISTORY 38 This unit stores the call history of up to 15 events. You can save the call history as a tab-delimited text (TSV format) file by downloading it to the PC. 1 In the web menu, click “Download Call History”. The “Download File” window appears. 2 Click “Save As”. The “Save A...

39 CONF IGUR A T IO NS English You can send information or the event which occurs in the system of this unit to another unit as the message (this is called “Syslog”). “Syslog” contains information of such as start/shut down of this unit, login, the activity in normal states, the states of an error. ...

HIERARCHICAL CONNECTION OF MULTIPLE PJP UNITS (CASCADE CONNECTION) 40 The cascade connection classifies the PJP units to be involved in a call into the servers and clients, connects each client to a server and establishes the call by interconnecting the servers. While the maximum number of locations...

41 Hierarchical Connection of Multiple PJP Units (Cascade Connection) CONF IGUR A T IO NS English First configure the setting of cascade server unit, and then configure the settings of the cascade client units. ■ Step 1. Configure the setting of the cascade server. 1 Press in the initial display. Th...

UPDATING THE FIRMWARE 42 You can download the firmware (program to control the functions of this unit) to use the latest features. There are two ways to install the firmware: the one is that you connect to the internet using this unit and automatically install the latest firmware to this unit. The o...

43 Updating the Firmware CONF IGUR A T IO NS English Follow the procedure below to install the latest firmware automatically. • Automatic firmware update can be performed only if this unit can be connected to the internet. If not, follow the procedure in “Updating the firmware manually” (page 44). •...

44 Updating the Firmware ■ Specifying the URL to connect for downloading the firmware It is convenient to control the firmware version used for PJP in your office. 1 Click “Firmware Update” in the web menu. The “Firmware Update” window appears. 2 Select “Other”, and then enter the URL to be connecte...

45 Updating the Firmware CONF IGUR A T IO NS English 2 Start “Command Prompt” in the Windows PC which can access the web menu of this unit. When using Windows XP, select the “Start” menu → “All Program” → “Accessories” → “Command Prompt”. 3 Enter and run the following command. tftp -i [IP address of...

TROUBLESHOOTING 46 Refer to the following tables when this unit does not function properly. If the problem you are experiencing is not listed or if the instruction does not help, contact the nearest authorized YAMAHA dealer or service center. First, check if the microphone indicators light up. If th...

47 Troubleshooting ADDITIONAL INF O RMA T ION English Q2: Web menu setting is not available Problem Cause Remedy The web menu cannot be opened. The network setting of the PC is inappropriate (when other PCs and network printers in the LAN are also unusable). Set the LAN board and LAN card again and ...

48 Troubleshooting Q3: Call is impossible Problem Cause Remedy A call cannot be originated. An inappropriate IP address is entered. Check the IP address of the other unit and enter the correct IP address. The IP address of the other unit has been changed. Check the IP address of the other unit and e...

RESETTING THE UNIT 50 You can restore the factory settings of this unit. Before restoring the factory settings, note the following.• All of the settings that have the default settings are set to the default settings. • The data in the address book (page 33) and call history (page 38) are cleared. • ...

51 Resetting the Unit ADDITIONAL INF O RMA T ION English ■ Resetting using the web menu Follow the procedure below to restore the factory settings using the web menu. 1 In the web menu, click “Restore Factory Settings”. The “Restore Factory Settings” window appears. 2 Click “Restore Factory Settings...

OBTAINING THE SETTING INFORMATION FOR SUPPORT ON THIS UNIT 52 You can download the setting information and audio characteristic information and save them in your PC for the reference in case of troubles. These files are used for support so that you can not check or edit the contents using the normal...

53 ADDITIONAL INF O RMA T ION English General • Dimensions (W x H x D) ..................... 750 mm x 100 mm x 65 mm (29.5 in. x 3.9 in. x 2.6 in.) • Weight (excl. AC adapter) ....................................................... 2.9 kg (6.4 lbs) • Power supply........................................

NOTES FOR TRANSFER/DISPOSAL OF THIS UNIT 54 Restore the factory settings before transferring or disposing of this unit. When transferring this unit, be sure to transfer with the owner’s manual (this manual). The settings stored in this unit include the personal information such as address book or ca...

YAMAHA CORPORATION 10-1 Nakazawa-cho, Hamamatsu, Shizuoka 430-8650, Japan © 2006 All rights reserved. Printed in Japan WH86130 This owner’s manual is based on the firmware version 1.2x. The functions and specifications could be possibly added or changed by a firmware update.Visit the PJP website to ...