Yamaha KX25 - Manuals

(3)-11 Owner’s Manual 5 • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still...

Introduction Owner’s Manual 6 Thank you for purchasing the Yamaha KX25 / KX49 / KX61 USB KEYBOARD STUDIO.Included in the package are the KX MIDI keyboard for controlling a computer via USB as well as the DAW application software, Cubase AI4. Simply connect the KX to a computer via USB, and you’ve go...

About the Included Software Owner’s Manual 7 Special Notices about the Accessory Disks CAUTION • This disk containing the software is not meant for use with an audio/visual system (CD player, DVD player, etc.). Do not attempt to use the disk on equipment other than a computer. Special Notice • The c...

Owner’s Manual 8 Introduction ........................................... 6 Features ................................................. 6 Included Accessories ............................ 6 About the Included Software ................ 7 Special Notices about the Accessory Disks ............. 7 System...

Turning the Power On and Off Owner’s Manual 9 Power Supply The KX can be powered from one of the following two sources.• Power supply from the AC power adaptor• Power supply from the connected host computer (USB bus-power) Connecting the AC power adaptor 1. Make sure that the STANDBY/ON switch of th...

Front and Rear Panels Owner’s Manual 10 1 CONTROL knobs .............................Page 24 Use these knobs to adjust the parameter values of the VSTi in your computer. 2 Knob Functions Select button .......Page 24 Use this button to select one of the two functions assigned to each knob. 3 VELOCITY...

What You Can Do With the KX Owner’s Manual 12 The KX is, of course, a MIDI keyboard—however, it also provides a wealth of other convenient and powerful features for use with your computer and DAW software. Here’s a short introduction to what you can do with your KX. Keyboard Performance Play the key...

Setting Up Owner’s Manual 13 Installation Using the Cubase AI4 DVD-ROM Important! Since the End-User Software License Agreement (EUSLA) shown on your computer display when you install the “DAW” software is replaced by the agreement on page 42, you should disregard the EUSLA. Read the Cubase AI4 Lice...

Setting Up Owner’s Manual 16 Connection If you’ve followed the instructions on pages 13–15, you’ve connected your KX and computer as shown below. (Additional devices shown below have been included to cover other possible setups.) Keep in mind that all further instructions in this manual assume the c...

Using the KX with Cubase Owner’s Manual 17 The KX features a special Link feature that allows you seamless control over various functions in Cubase and provides enormous efficiency and speed in your music production workflow. Make sure you’ve connected all devices and properly set up your system (as...

Using the KX with Cubase Owner’s Manual 18 4. Remove the checkmarks by clicking the check boxes of “All MIDI Inputs” corresponding to the KX MIDI Ports 2 and 3 respectively. “Yamaha KX-2” and “Yamaha KX-3” on Windows and “YAMAHA KX YAMAHA KX Port 2” and “YAMAHA KX YAMAHA KX Port 3” on Macintosh corr...

Using the KX with Cubase Owner’s Manual 19 Setting up the VSTi You can create a track for the VSTi and open/close the VSTi window from the KX panel operation remotely. Performing such operations (normally performed on Cubase) from the KX panel is a great convenience and significantly speeds up your ...

Using the KX with Cubase Owner’s Manual 20 Playing the Keyboard Try playing the keyboard on the KX to hear the sound of “RockSt2” selected in step 4 on the previous page. Depending on the pressed note, a different instrument’s sound will be played back, allowing you to play your own rhythm pattern i...

Using the KX with Cubase Owner’s Manual 21 Holding Arpeggio playback 4. Press the [HOLD] button (the lamp lights). 5. Press a single note on the keyboard. The Arpeggio (rhythm pattern) starts just by playing a single note. While the [HOLD] lamp is turned on, Arpeggio playback will not stop even if y...

Using the KX with Cubase Owner’s Manual 23 Using the CUBASE FUNCTION Buttons Default functions When using Cubase, you can call up various windows within Cubase by using the CUBASE FUNCTION [A] and [B] buttons. ■ When using Cubase 4/Cubase Studio 4: The CUBASE FUNCTION [A] button can be used for call...

Using the KX with Cubase Owner’s Manual 24 Controlling the VSTi by Using the CONTROL Knobs Operating the CONTROL knobs on the KX panel edits or controls various parameters of the VSTi used on the computer. The KX provides 30 Control Templates which can be used for various VSTi plug-ins. By selecting...

Using the KX with Cubase Owner’s Manual 25 Controlling the Transport and Tracks You can use the panel controls on the KX to control transport functions (such as Play, Record and Stop) within Cubase, and perform other operations, such as muting and soloing of selected tracks. Cursor buttons These but...

Basic Operation on the KX Owner’s Manual 26 This section describes the basic operations of the KX, such as how to shift the octave range of the keyboard and use the display interface. Display Indications The display shows various parameters depending on your panel operation. Top display This display...

Basic Operation on the KX Owner’s Manual 27 Changing the Octave Range Use these buttons to shift the note range of the keyboard by octave (three octaves, up or down). The initial default setting (no shift) is recalled by pressing both the buttons simultaneously. The current octave range can be confi...

Control Templates Owner’s Manual 28 The KX provides 30 Control Templates which can be used for VSTi plug-in software. By selecting the desired Control Template, you can automatically call up the appropriate function assignments for controlling the currently selected VSTi with the CONTROL knobs.When ...

Control Templates Owner’s Manual 29 Editing a Control Template Changing the message type generated by using the CONTROL knobs The MIDI messages generated by operating the CONTROL knobs are divided into two types: Remote and CC (Control Change). Only one of these two types can be active, and the type...

Arpeggio Owner’s Manual 31 The KX features a powerful Arpeggio function, that lets you play various phrases or rhythm pattern depending on the notes you press. Among the preset 342 Arpeggio types provided in the KX, each of 66 types for drum/percussion sounds consists of four phrases (rhythm pattern...

Arpeggio Owner’s Manual 32 Using MIDI Clock to control Arpeggio tempo With the initial default setting (Sync = Auto on page 36), the Arpeggio is played back according to the tempo determined by the internal or external clock as described below. When MIDI clock is received from an external MIDI devic...

Arpeggio Owner’s Manual 33 Editing an Arpeggio The Arpeggio can be edited as desired. For example, you can alter the rhythmic feel of the Arpeggio by changing the amount of Swing, adjust the gate time (length) of the notes, or even select a different variation to completely change the Arpeggio patte...

Using the KX with a DAW Other than Cubase Owner’s Manual 34 This section shows you how to set up the KX for controlling DAW software other than Cubase. For more information on setting up on your particular DAW, refer to the manual of the DAW software. 1. Press the [UTILITY] button. The LED lamp abov...

Utility Settings Owner’s Manual 36 In the Utility display, you can make various settings such as the Arpeggio tempo, MIDI transmit/receive settings, and display related settings. Basic Operation 1. Press the [UTILITY] button. The LED lamp above the button lights and the Utility display appears. 2. U...

Troubleshooting Owner’s Manual 39 The power of the instrument does not turn on. • If the KX is not connected to a computer, confirm whether or not the AC power adaptor is properly plugged into the KX. • If you are not using an AC power adaptor, confirm whether or not a USB cable is properly plugged ...

Message List Owner’s Manual 40 Message List LCD Indication Description MIDI buffer full. Failed to process the MIDI data because too much data was received at one time. MIDI checksum error. The check sum for the data received is incorrect. MIDI data error. An error occurred when receiving MIDI data....

TOOLS for KX LICENSE AGREEMENT Owner’s Manual 41 ATTENTION PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDU...

Cubase AI4 LICENSE AGREEMENT Owner’s Manual 42 6. THIRD PARTY SOFTWARE Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWAR...

Appendix Owner’s Manual 44 Specifications * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be...

Appendix Owner’s Manual 45 Control Template List For details about what function is assigned to each knob when each Template is selected, refer to the following page:http://www.yamahasynth.com/ No. Manufacturer Product name Indication on the KX display 1 Steinberg HALion One HALionOne 2 Mystic Mysti...

Appendix Owner’s Manual 46 Arpeggio Type List General Instrument types which can be selected on HALionOne and are most suitable for the respective Arpeggio Types are listed in the “Instrument Type” column. Category Arp. No. Arp. Name Time Signature Length Original Tempo Instrument Type DrPc 1 Contmp...

MIDI Implementation Chart Owner’s Manual 50 MIDI Implementation Chart Note Number : True voice ************** 0 - 127 x x Memorized YAMAHA [ USB KEYBOARD STUDIO ] Date :12-JUL-2007 Model KX25/KX49/KX61 MIDI Implementation Chart Version : 1.0 Function... Transmitted Recognized Remarks Basic Default C...

Index Owner’s Manual 52 A AC power adaptor ..................................................... 9 ADD INSTRUMENT TRACK ................................ 10, 19 ARP EDIT .......................................................... 10, 33 ARP ON/OFF ..................................................... ...

(3)-11 Owner’s Manual 5 • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still...

Introduction Owner’s Manual 6 Thank you for purchasing the Yamaha KX25 / KX49 / KX61 / KX8 USB KEYBOARD STUDIO.Included in the package are the KX MIDI keyboard for controlling a computer via USB as well as the DAW application software, Cubase AI4. Simply connect the KX to a computer via USB, and you...

About the Included Software Owner’s Manual 7 Special Notices about the Accessory Disks CAUTION • This disk containing the software is not meant for use with an audio/visual system (CD player, DVD player, etc.). Do not attempt to use the disk on equipment other than a computer. Special Notice • The c...

Owner’s Manual 8 Introduction ........................................... 6 Features ................................................. 6 Included Accessories ............................ 6 About the Included Software ................ 7 Special Notices about the Accessory Disks ............. 7 System...

Turning the Power On and Off Owner’s Manual 9 Power Supply The KX can be powered from one of the following two sources.• Power supply from the AC power adaptor• Power supply from the connected host computer (USB bus-power) Connecting the AC power adaptor 1. Make sure that the STANDBY/ON switch of th...

Front and Rear Panels Owner’s Manual 10 1 CONTROL knobs .............................Page 24 Use these knobs to adjust the parameter values of the VSTi in your computer. 2 Knob Functions Select button .......Page 24 Use this button to select one of the two functions assigned to each knob. 3 VELOCITY...

What You Can Do With the KX Owner’s Manual 12 The KX is, of course, a MIDI keyboard—however, it also provides a wealth of other convenient and powerful features for use with your computer and DAW software. Here’s a short introduction to what you can do with your KX. Keyboard Performance Play the key...

Setting Up Owner’s Manual 13 Installation Using the Cubase AI4 DVD-ROM Important! Since the End-User Software License Agreement (EUSLA) shown on your computer display when you install the “DAW” software is replaced by the agreement on page 42, you should disregard the EUSLA. Read the Cubase AI4 Lice...

Setting Up Owner’s Manual 16 Connection If you’ve followed the instructions on pages 13–15, you’ve connected your KX and computer as shown below. (Additional devices shown below have been included to cover other possible setups.) Keep in mind that all further instructions in this manual assume the c...

Using the KX with Cubase Owner’s Manual 17 The KX features a special Link feature that allows you seamless control over various functions in Cubase and provides enormous efficiency and speed in your music production workflow. Make sure you’ve connected all devices and properly set up your system (as...

Using the KX with Cubase Owner’s Manual 18 4. Remove the checkmarks by clicking the check boxes of “All MIDI Inputs” corresponding to the KX MIDI Ports 2 and 3 respectively. “Yamaha KX-2” and “Yamaha KX-3” on Windows and “YAMAHA KX Port 2” and “YAMAHA KX Port 3” on Macintosh correspond to MIDI Port ...

Using the KX with Cubase Owner’s Manual 19 Setting up the VSTi You can create a track for the VSTi and open/close the VSTi window from the KX panel operation remotely. Performing such operations (normally performed on Cubase) from the KX panel is a great convenience and significantly speeds up your ...

Using the KX with Cubase Owner’s Manual 20 Playing the Keyboard Try playing the keyboard on the KX to hear the sound of “RockSt2” selected in step 4 on the previous page. Depending on the pressed note, a different instrument’s sound will be played back, allowing you to play your own rhythm pattern i...

Using the KX with Cubase Owner’s Manual 21 Holding Arpeggio playback 4. Press the [HOLD] button (the lamp lights). 5. Press a single note on the keyboard. The Arpeggio (rhythm pattern) starts just by playing a single note. While the [HOLD] lamp is turned on, Arpeggio playback will not stop even if y...

Using the KX with Cubase Owner’s Manual 23 Using the CUBASE FUNCTION Buttons Default functions When using Cubase, the functions related to the operations of the Preset Browser are assigned to the CUBASE FUNCTION [A] and [B] buttons. ■ CUBASE FUNCTION [A]: Pressing this button calls up the Preset Bro...

Using the KX with Cubase Owner’s Manual 24 Controlling the VSTi by Using the CONTROL Knobs Operating the CONTROL knobs on the KX panel edits or controls various parameters of the VSTi used on the computer. The KX provides 30 Control Templates which can be used for various VSTi plug-ins. By selecting...

Using the KX with Cubase Owner’s Manual 25 Controlling the Transport and Tracks You can use the panel controls on the KX to control transport functions (such as Play, Record and Stop) within Cubase, and perform other operations, such as muting and soloing of selected tracks. Cursor buttons These but...

Basic Operation on the KX Owner’s Manual 26 This section describes the basic operations of the KX, such as how to shift the octave range of the keyboard and use the display interface. Display Indications The display shows various parameters depending on your panel operation. Top display This display...

Basic Operation on the KX Owner’s Manual 27 Changing the Octave Range Use these buttons to shift the note range of the keyboard by octave (three octaves, up or down). The initial default setting (no shift) is recalled by pressing both the buttons simultaneously. The current octave range can be confi...

Control Templates Owner’s Manual 28 The KX provides 30 Control Templates which can be used for VSTi plug-in software. By selecting the desired Control Template, you can automatically call up the appropriate function assignments for controlling the currently selected VSTi with the CONTROL knobs.When ...

Control Templates Owner’s Manual 29 Editing a Control Template Changing the message type generated by using the CONTROL knobs The MIDI messages generated by operating the CONTROL knobs are divided into two types: Remote and CC (Control Change). Only one of these two types can be active, and the type...

Arpeggio Owner’s Manual 31 The KX features a powerful Arpeggio function, that lets you play various phrases or rhythm pattern depending on the notes you press. Among the preset 342 Arpeggio types provided in the KX, each of 66 types for drum/percussion sounds consists of four phrases (rhythm pattern...

Arpeggio Owner’s Manual 32 Using MIDI Clock to control Arpeggio tempo With the initial default setting (Sync = Auto on page 36), the Arpeggio is played back according to the tempo determined by the internal or external clock as described below. When MIDI clock is received from an external MIDI devic...

Arpeggio Owner’s Manual 33 Editing an Arpeggio The Arpeggio can be edited as desired. For example, you can alter the rhythmic feel of the Arpeggio by changing the amount of Swing, adjust the gate time (length) of the notes, or even select a different variation to completely change the Arpeggio patte...

Using the KX with a DAW Other than Cubase Owner’s Manual 34 This section shows you how to set up the KX for controlling DAW software other than Cubase. For more information on setting up on your particular DAW, refer to the manual of the DAW software. 1. Press the [UTILITY] button. The LED lamp abov...

Utility Settings Owner’s Manual 36 In the Utility display, you can make various settings such as the Arpeggio tempo, MIDI transmit/receive settings, and display related settings. Basic Operation 1. Press the [UTILITY] button. The LED lamp above the button lights and the Utility display appears. 2. U...

Troubleshooting Owner’s Manual 39 The power of the instrument does not turn on. • If the KX is not connected to a computer, confirm whether or not the AC power adaptor is properly plugged into the KX. • If you are not using an AC power adaptor, confirm whether or not a USB cable is properly plugged ...

Message List Owner’s Manual 40 Message List LCD Indication Description MIDI buffer full. Failed to process the MIDI data because too much data was received at one time. MIDI checksum error. The check sum for the data received is incorrect. MIDI data error. An error occurred when receiving MIDI data....

TOOLS for KX LICENSE AGREEMENT Owner’s Manual 41 ATTENTION PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDU...

Cubase AI4 LICENSE AGREEMENT Owner’s Manual 42 OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and caus...

Appendix Owner’s Manual 44 Specifications * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be...

Appendix Owner’s Manual 45 Control Template List For details about what function is assigned to each knob when each Template is selected, refer to the following page:http://www.yamahasynth.com/ No. Manufacturer Product name Indication on the KX display 1 Steinberg HALion One HALionOne 2 Mystic Mysti...

Appendix Owner’s Manual 46 Arpeggio Type List General Instrument types which can be selected on HALionOne and are most suitable for the respective Arpeggio Types are listed in the “Instrument Type” column. Category Arp. No. Arp. Name Time Signature Length Original Tempo Instrument Type DrPc 1 Contmp...

MIDI Implementation Chart Owner’s Manual 50 MIDI Implementation Chart Note Number : True voice ************** 0 - 127 x x Memorized YAMAHA [ USB KEYBOARD STUDIO ] Date :10-JAN-2008 Model KX25/KX49/KX61/KX8 MIDI Implementation Chart Version : 1.0 Function... Transmitted Recognized Remarks Basic Defau...

Index Owner’s Manual 52 A AC power adaptor ..................................................... 9 ADD INSTRUMENT TRACK ................................ 10, 19 ARP EDIT .......................................................... 10, 33 ARP ON/OFF ..................................................... ...

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario,M1S 3R1, CanadaTel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Cal...