Yamaha HTR-2071 - Manuals

Surround playback with 5 speakers placed in front You can enjoy the surround sound even when the surround speakers are placed in front. • “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.29) Enhanced bass reproduction Extra Bass allows you to enjoy enhanced bass repro...

Part names and functions The part names and functions of the unit and the supplied remote control are as follows. Front panel INFO MEMORY PRESET FM MODE MUTE TUNING PHONES SILENT CINEMA VOLUME TONE CONTROL STRAIGHT TV BD DVD CD RADIO INPUT PROGRAM SCENE 2 8 9 3 4 1 5 6 7 0 B D E F A C 1 z (power) ke...

Front display (indicators) -R es Hi YPAO VOL. PARTY ZONE FPR SBL SB SBR FPL VIRTUAL 3 B 2 A LINK MASTER 2 ENHANCER ECO OUT A - DRC SLEEP STEREO TUNED VOL. SL SW SR MUTE 1 2 4 5 6 3 8 7 8 0 9 A B 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being o...

Rear panel SUB WOOFER 7 8 5 6 2 1 3 4 ▪ The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. 1 HDMI OUT jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.17). When using ARC, TV audio signal can also b...

PREPARATIONS General setup procedure 1 Placing speakers................................................................................................................................ (p.12) 2 Connecting speakers...........................................................................................

1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speakerlayout examples. Notice ▪ Use speakers with an impedance of at least 6 W . ▪ Be sure to connect the front lef...

Typical speaker layouts n 5.1-channel system We recommend this speaker layout which can maximize the performance of the unit. 4 5 1 2 3 9 10° to 30° 10° to 30° Speaker type Abbr. Function Front (L/R) 1 / 2 Produce front left/right channel sounds (stereo sounds). Center 3 Produces center channel soun...

Other speaker layouts The following speaker layouts are also available. n 3.1-channel system 1 2 3 9 n 2.1-channel system 1 2 9 En 14

2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for a 5.1-channel system as an example. For other systems, connect speakerswhile referring to the connection diagram for the 5.1-channel system. Notice ▪ Remove the unit’s power cab...

Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) terminals of the unit and the speaker to each other, and the other is for the positive (+) terminals. If thewires are colored to prevent confusion, connect the black wire to the negative and theother wire...

3 Connecting a TV/playback devices The unit is equipped with a variety of input jacksincluding HDMI input jacks to allow you to connectdifferent types of playback devices. Input/output jacks and cables n Video/audio jacks HDMI jacks Transmit digital video and digital sound through asingle jack. Use ...

Connecting a TV Connect the TV to the unit with an HDMI cable and a digital optical cable. HDMI HDMI HDMI OPTICAL OPTICAL HDMI HDMI HDMI OPTICAL OPTICAL O O O O The unit (rear) AUDIO 1 (OPTICAL) jack HDMI OUT jack HDMI input Audio output (digital optical) TV Note ▪ A digital optical cable connection...

n Changing the combination of video/audio input jacks If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device.You can connect a video device that has the following video/audio output jac...

Connecting audio devices (such as CD players) Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the followingconnections. Audio output jacks on audio device Audio input jacks on the unit Digital opti...

5 Connecting the power cable Warning (Brazil and General models only)Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard. Before connecting the powe...

6 Selecting an on-screen menu language Select the desired on-screen menu language. 1 Press z (receiver power) to turn on the unit. 2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note Operations with TV screen are available only when your TV is connected to t...

7 Configure the speaker settings 1 Press RECEIVER z to turn on the unit. 2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). 3 Press SETUP. 4 Use the cursor keys to select “Speaker” and press ENTER. 5 Configure the output characteristics of the speakers. 1 Use th...

6 Set the distance between each speaker and listening position. 1 Use the cursor keys to select “Distance” and press ENTER. 2 Use the cursor keys ( q / w ) to select speaker and cursor keys ( e / r ) to set distance. 3 When setting is complete, press RETURN. Setting items Speaker Setting range Front...

PLAYBACK Basic playback procedure Enjoying playback 1 Turn on the external devices (such as a TV or BD/DVD player)connected to the unit. 2 Use the input selection keys to select an input source. MUTE FM PRESET VOLUME P RO G RA M I N P U T TUNING MUTE MEMORY TOP MENU HOME POP-UP/MENU DISPLAY RETURN S...

Selecting the input source and favorite settings with one touch (SCENE) The SCENE function allows you to select the assigned input source, sound program,and Compressed Music Enhancer on/off with just one touch. Selecting a registered scene 1 Press SCENE. The input source and settings registered to t...

Selecting the sound mode The unit is equipped with a variety of sound programs and surround decoders thatallow you to enjoy playback sources with your favorite sound mode (such as soundfield effect or stereo playback). TUNING MUTE MEMORY TOP MENU HOME POP-UP/MENU DISPLAY RETURN SETUP OPTION ENTER FM...

Enjoying sound field effects (CINEMA DSP) The unit is equipped with a variety of sound programs that utilize Yamaha’s originalDSP technology (CINEMA DSP). It allows you to easily create sound fields like actualmovie theaters or concert halls in your room. ENHANCER LINK ECO MASTER OUT 2 -Res Hi YPAO ...

Enjoying unprocessed playback You can play back input sources without any sound field effect processing. n Playing back in original channels (straight decode) When the straight decode mode is enabled, the unit produces stereo sound from thefront speakers for 2-channel sources such as CDs, and produc...

Enhancing the bass (Extra Bass) Extra Bass allows you to enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. 1 Press BASS. Each time you press the key, Extra Bass is enabled or disabled. Note You can also use “Extra Bass” (p.45) in t...

Listening to FM radio You can tune into a radio station by specifying its frequency or selecting fromregistered radio stations. Note ▪ The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in...

2 Press TUNING repeatedly to set a frequency. Hold down the key for about a second to search stations automatically. TUNING MUTE MEMORY TOP MENU HOME POP-UP/MENU DISPLAY RETURN SETUP OPTION ENTER FM PRESET VOLUME P RO G RA M STRAIGHT ENHANCER BASS I N P U T BD DVD T V C D S C E N E RADIO SLEEP BLUE ...

4 To start the Auto Preset process, press ENTER. ENHANCER LINK ECO MASTER OUT 2 -Res Hi YPAO VOL. A - DRC SLEEP PARTY ZONE 3 B 2 A MUTE VIRTUAL STEREO TUNED FPR SBL SB SBR FPL SL SW SR VOL. 01:FM 87.50MHz “SEARCH” appears during Auto Preset Preset number from which to start the registration Note ▪ T...

n Selecting a preset station Tune into a registered radio station by selecting its preset number. 1 Press FM to select “TUNER” as the input source. 2 Press PRESET repeatedly to select the desired radio station. MUTE FM PRESET VOLUME P RO G RA M I N P U T TUNING MUTE MEMORY TOP MENU HOME POP-UP/MENU ...

Radio Data System tuning (U.K. and Europe models only)Radio Data System is a data transmission system used by FM stations in manycountries. The unit can receive various types of Radio Data System data, such as“Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned into a R...

Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. Thismenu is available on the front panel (or on the TV screen), allowing you to easilyconfigure settings during playback. 1 Press OPTION. ENHANCER L...

n Volume Trim (Volume Trim) Fine-adjusts volume difference between input sources or subwoofer volume. Input Trim (In.Trim) Corrects volume differences between input sources. If you are bothered by volumedifferences when switching between input sources, use this function to correct it. Note This sett...

n Video Out (Video Out) Selects a video to be output with the selected audio source. For example, you can watch the video while listening to the radio. Input sources AUDIO 1-5, TUNER Settings Off(Off) Does not output video. HDMI 1-4 Outputs video input through the corresponding video input jacks. En...

CONFIGURATIONS Configuring various functions (Setup Menu) You can configure the unit’s various function with the menu displayed on the TVscreen. Note Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry outoperations while viewing the front displ...

Setup menu items Menu Item Function Page Speaker Configuration Subwoofer Selects whether or not a subwoofer is connected. p.44 Front Selects the size of the front speakers. p.44 Center Selects whether or not a center speaker is connected and its size. p.44 Surround Selects whether or not surround sp...

Speaker Configures the speaker settings manually. Note Default settings are underlined. n Configuration Configures the output characteristics of the speakers. Note When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of yourspeaker is 16 cm (6 ‑ 1/4”) or l...

Surround Selects whether or not surround speakers are connected and their sizes. Settings Small Select this option for small speakers.The subwoofer or front speakers will produce surround channel low-frequency components (configurable in “Crossover”). Large Select this option for large speakers.The ...

n Distance Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distancefrom “Meter” or “Feet”. Choices Front L, Front R, Center, Surround L, Surround R, Subwoofer Setting range 0.30 m ...

HDMI Configures the HDMI settings. Note Default settings are underlined. n HDMI Control Enables/disables HDMI Control (p.66). Settings Off Disables HDMI Control. On Enables HDMI Control.Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and“SCENE”. Note To use HDMI control, you need ...

n Standby Sync Select whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control” is set to “On”. Settings Off Does not set the unit to standby mode when the TV is turned off. On Sets the unit to standby mode when the TV is turned off. Auto Sets the unit to stan...

Sound Configures the audio output settings. Note Default settings are underlined. n DSP Parameter Configures the surround decoder settings. Panorama Enables/disables the broadening effect of the front sound field. When this functionis enabled, you can wrap front left/right channel sounds around the ...

n Dialogue Adjusts the volume of dialogue sounds. Dialogue Level Adjusts the volume of the center orientation sounds such as dialogue. Setting range 0 to 3 (higher to strengthen) n Volume Configures the volume settings. Scale Switches the scale of the volume display. Settings dB Displays the volume ...

ECO Configures the power supply settings. Note Default settings are underlined. n Auto Power Standby Set the amount of time for the auto-standby function. Settings Off Does not set the unit to standby mode automatically. 20 minutes Sets the unit to standby mode when you have not operated the unit an...

Function Configures the functions that make the unit easier to use. Note Default settings are underlined. n Input Rename Changes the input source name displayed on the front display. You can also select aname created by the Auto Rename function. Input sources HDMI 1–4, AUDIO 1–5 Default HDMI 1-4: Au...

n Input Skip Set which input source is skipped when operating the INPUT key.You can select the desired input source quickly by using this function. Input sources HDMI 1–4, AUDIO 1–5, TUNER Settings Off Does not skip the selected input source. On Skips the selected input source. n Dimmer Adjusts the ...

Language Select an on-screen menu language. Note Default settings are underlined. Settings English English 日本語 Japanese Français French Deutsch German Español Spanish Русский Russian Italiano Italian 中文 Chinese Note The information on the front display is provided in English only. En 54

Configuring the system settings (ADVANCED SETUP menu) Configure the system settings of the unit while viewing the front display. 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the front panel, press z (power). (power) z STRAIGHT PROGRAM 3 Press PROGRAM to select an item. 4 Press ST...

Changing the FM tuning frequency setting (TU) (Asia and General models only) ENHANCER LINK ECO MASTER OUT 2 -Res Hi YPAO VOL. A - DRC SLEEP STEREO PARTY TUNED ZONE 3 B 2 A VOL. FPR SL SW SR SBL SB SBR FPL MUTE VIRTUAL TU••••••••FM50 Change the FM tuning frequency setting of the unit depending on you...

Restoring the default settings (INIT) ENHANCER LINK ECO MASTER OUT 2 -Res Hi YPAO VOL. A - DRC SLEEP STEREO PARTY TUNED ZONE 3 B 2 A VOL. FPR SL SW SR SBL SB SBR FPL MUTE VIRTUAL INIT••••CANCEL Restores the default settings for the unit. Choices ALL Restores the default settings for the unit. CANCEL...

APPENDIX Frequently asked questions The frequently asked questions from customers and the answers are shown below. The new speaker system does not provide an ideal sound balance... If you have changed speakers or have a new speaker system, reconfigure the speakersettings in “Speaker” in the “Setup” ...

Troubleshooting Refer to the table below when the unit does not function properly.If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorizedYamaha dealer or service center. First,...

Problem Cause Remedy The unit cannot be controlled using the remote control. The unit is out of the operating range. Use the remote control within the operating range (p.4). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight orstrong li...

Error indications on the front display Refer to the table below when the error message is indicated on the front display. Message Cause Remedy Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly. Internal Error An i...

Glossary This is a glossary of the technical terms used in this manual. Audio information n Audio decoding format Dolby Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. thatsupports 5.1-channel audio. This technology is used for audio on most DVD disc....

Yamaha technologies CINEMA DSP (Digital Sound Field Processor) Since the surround sound systems were originally designed for use in movie theaters, their effectis best experienced in a theater that has many speakers designed for acoustic effects. Sincehome conditions (such as room size, wall materia...

Information on HDMI The additional information on HDMI is as follows. HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TVthat supports HDMI Control to the unit with an HDMI cable, you can control the unit(such as power and volume) with TV remote control ope...

3 Use the cursor keys to select “HDMI” and press ENTER. 4 Use the cursor keys ( q / w ) to select “HDMI Control” and the cursor keys ( e / r ) to select “On” as shown below. 5 If you made a digital optical cable connection between the TV and theunit, use the cursor keys ( q / w ) to select “TV Audio...

Audio Return Channel (ARC) ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV.Check the following after the HDMI Control settings. 1 Select a TV program with the TV remote control. 2 Check that the input source of the unit will be automaticallyswi...

Trademarks The trademarks used in this manual are as follows. Manufactured under license from Dolby Laboratories. Dolby,Pro Logic, and the double-D symbol are trademarks of DolbyLaboratories. For DTS patents, see http://patents.dts.com. Manufacturedunder license from DTS Licensing Limited. DTS, the ...

Specifications The specifications of this unit are as follows. Input jacks Analog Audio • Audio x 2 Digital Audio (Supported frequencies: 32 kHz to 96 kHz) • Optical x 1• Coaxial x 2 HDMI Input • HDMI x 4 Output jacks Analog Audio • Speaker Out x 6 (FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER)• Subwo...