Yamaha 107- Manuals

1 10 Safety Precautions Set-up Data © Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the written permission of Öhlins Racing AB is prohibited. Printed in Sweden. Safety Symbols In this manual, mounting instructions and other technical documents, important informati...

9 2 How to Install Recommended Tools 6.8 Use tool 01766-02, push down the preload tube. Pull up the shaft, use an OEM Pull up Tool. Insert a Stopper plate tool. Assemble the top cap to the shaft by tightening it to the lock nut. Tightening torque: 15 Nm. Note! Make sure that the distance between the...

3 8 How to install How to install 6.1 Install the cartridge assembly into the fork leg and tighten it to the form bottom using Seal head tool 04702-04.Tightening torque: 20 Nm. Loctite 270. Note! Check the condition of the copper washer. Replace if worn or deformed. 6.2 Pour approximately 0,5 litre ...