Xantech 686-10 - Manuals

Xantech 686-10 – Manual in PDF format online.

Manuals:

Manual Xantech 686-10

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - secondary rooms when you have no visual aid for status.; only as long as the MMT code is being sent. The relay is normally OFF.; ON at the same time. GP-ON overrides all individual settings.; Place the; Speaker

® 2 686-10 CAUTION: While the RC68+ can be used as a handheld remote control, it is highly recommended it notbe given to the final user for the following reasons: • Since it includes adjustable code groups, the user may inadvertently alter the installed configurations. • Also, since the user will re...

Page 3 - Remote Control Switchers; Power Interruption Status; MAIN ROOM; A Typical System using the 686-10 Remote Speaker Switcher

® 3 Remote Control Switchers 686-10 Power Interruption Status The 686-10 should normally be plugged into an unswitched AC outlet. However, if the power to the 686-10 is interrupted by a power failure or other reason, the internal memory will retain the last selectedswitched status for each of the sp...

Page 4 - IMPORTANT • • •; 0, the Xantech Model 782 High Current Regulated Power Supply

® 4 NOTE: When the 686-10 is connected to Xantech 760-00 Match Maker room volume controls, as shownin Fig. 3, the PROTECTION RESISTOR is not necessary, since the Match Makers, when set correctly, willprovide the proper impedance match to the multiple speakers with virtually no power loss. In this ca...

Xantech Manuals