Page 2 - Figure 3; Over The Air Activation; Wireless Connection: and
Ver. 1.5 4/21/2009 - 2 - Figure 3 8. Click on the Over The Air Activation button. 9. If Network Stability is OK For Activation ( if Not Ok for Activation, wait 3 minutes.) If Not OK for Activation for 15 additional minutes, contact Support. 10. Click the Activate button. 11. Wait 3 minutes, then che...
Page 3 - Wireless; Figure 5; Home; Figure 6
Ver. 1.5 4/21/2009 - 3 - 19. Click on the Status- Wireless button, and verify that there is a Current IP address. This may take several minutes depending on the carrier network. Figure 5 20. Click on the Home button. 21. Click on the Restart button and confirm by clicking the Restart button again, a...
Page 4 - Figure 7; Log In; Figure 8; Ok for Activation; Figure 9
Ver. 1.5 4/21/2009 - 4 - Figure 7 5. Enter the user name ‘ctek’ and password ‘ctek’ 6. Click the Log In button. 7. Click on the Activation button. 8. Click on the Over the Air Activation button Figure 8 9. If Network Stability is Ok for Activation then go to step 10, if Not Ok, then wait 3 minutes. ...
Page 6 - Refer to the Edimax users guide CD for additional information.; WEP Key Setup; WEP; Encryption Key 1: Enter your 10 Characters Key- see chart below
Ver. 1.5 4/21/2009 - 6 - Setting Up WiFi Security on the Edimax BR-6204WG Refer to the Edimax users guide CD for additional information. Once you have an internet connection and an unsecure WiFi connection established proceed to setup WiFi security for your Edimax router. Figure 12 WEP Key Setup Fig...
Page 7 - Parameters Default Description; Key Length; To connect your XP computer to your wireless network; Configuring the Windows XP Wireless Clients (With WEP)
Ver. 1.5 4/21/2009 - 7 - Figure 14 WEP Key Setup Parameters Default Description Key Length 64-bit You can select the WEP key length for encryption, 64-bit or 128-bit. Larger WEP key length requires 26 hexadecimal characters. Key Format Use hexadecimal digits (in the "A-F", "a-f" and ...
Page 8 - To connect your Windows Vista computer to your wireless network; View and connect to available wireless networks
Ver. 1.5 4/21/2009 - 8 - Wireless Network Adapter Driver Supports Wireless Auto Configuration with Windows XP with SP2 Use the following procedure to configure Windows XP with SP2 for your infrastructure mode wireless network when the wireless network adapter supports Wireless Auto Configuration: 1....
Page 9 - After you're connected, you can close the; Wireless Network Connection
Ver. 1.5 4/21/2009 - 9 - only if your computer has a wireless network adapter installed and the adapter is turned on. 1. Open Connect to a Network by clicking the Start button , and then clicking Connect to . 2. In the Show list, click Wireless . You'll see a list of the wireless networks currently ...
Page 11 - RETURN AUTHORIZATION POLICY
Ver. 1.5 4/21/2009 - 11 - For Winegard TravelNet Internet Only Models (TN-2033, TN-2055, TN-2099) WINEGARD MOBILE PRODUCTS LIMITED WARRANTY (2 YEARS PARTS) Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purch...