Winegard RM-DM55 - Manuals - manualsarea.com

Page 2 - VERY SLOWLY; TUNING ANTENNA FOR THE BEST PICTURE

2 3 TV Set #2 View RS-1000 TV Video Switch To TV VCR Ant. Aux. Satellite Receiver Satellite antenna downlead To Receiver RS-1000 downlead Wall plate power supply TV/Ant. Sat TV TV TV VCR To ‘TV In’ Satellite Receiver Satellite antenna downlead To Receiver RS-1000 Wall plate power supply TV/Ant. Sat ...

Page 3 - Reflector at 90°; FIGURE 5; mended the unit

4 5 TROUBLE SHOOTING NO PICTURE ON TV 1. Do you have a clear line of sight to the satellite? Are there trees, buildings, etc. in the way? Figure 3 illustrates the look angle of your reflector.2. Do you have the menu from the receiver? If not, check the channel the TV set is tuned for — it should be ...

Page 5 - DIGITAL ELEVATION SENSOR ROOF CONNECTIONS; This wire harness connects to the digital; Be sure rotate/lock lever is pointing toward back; and; INSIDE YOUR RV; See template on reverse side.

8 FOR RM-DM61/RM-DM55 ONLY DIGITAL ELEVATION SENSOR ROOF CONNECTIONS The illustrations below show the different methods of connecting wires at roof level. Method will depend on model. Wire colors MUST MATCH (i.e. red to red, green to green, black to black, white to white). This wire harness connects...

Page 6 - Roof Template; DRILL THROUGH CEILING.

ALIGN WITH BASEPLATE AREA MARKED “FRONT” POINT TO FRONT OF VEHICLE  Roof Template 1/8” DRILL BIT 8 HOLES. DO NOT DRILL THROUGH CEILING. 1-3/4” DIA. DRILL COMPLETELY THROUGH CEILING 

Page 7 - IF YOU ARE USING AN EXTEN-

9 WITHOUT ROOF WEDGE Measure from top of roof to ceiling. TOP OF ROOF ➤ ➤ ➤ ➤ WITH ROOF WEDGE Measure from top of roof wedge to ceiling. TOP OF ROOF WEDGE CEILING CEILING See template on reverse side. STEP 19. The directional handle and threaded rod will fit roofs up to 5-1/4” thick. If you are usin...

Page 8 - The antenna MUST BE IN THE; EXPLODED PARTS VIEW

10 11 Rotation Clamp ASSEMBLED VIEW POINT TO BACK OF RV POINTER MUST POINT TO RED SCREW ON ROTATION CLAMP WHEN IN TRAVEL POSITION CAUTION: After INITIAL INSTALLATION, the antenna should ROTATE appRoximately 360° FROM TRAVEL POSITION. The pointer on the DIRECTIONAL HANDLE should point towards the RED...

Page 9 - SPECIFICATIONS; and Bell TVTM; PARTS LIST; INTERIOR

12 13 SPECIFICATIONS Height when raised ......... 30” with satellite antenna in vertical position Height in travel position ......... 8” Operating radius ......... 35” (70” diameter circle) Roof space required ......... 19.5” x 46.75” LNBF ......... Compatible with DISH ® , DIRECTV ® and Bell TV™ Co...

Page 10 - REPLACEMENT PARTS KITS; HEAD ASSEMBLY RP-RS00; RD MODELS

14 15 REPLACEMENT PARTS KITS HEAD ASSEMBLY RP-RS00 Head w/bracket and nut ................. 1 Pins ................................................ 2 E-Clip ............................................. 2 REFLECTOR RP-REFL Dish................................................ 1 Bolt.....................

Page 11 - WINEGARD MOBILE PRODUCTS LIMITED WARRANTY; environments such as salt spray and acid rain.

Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601 © Winegard Company, 2003, 2005 2451070 Rev5 12/12 WINEGARD MOBILE PRODUCTS LIMITED WARRANTY (2 YEARS PARTS; 1 YEAR LABOR) Winegard Company warrants this product against defects in materials or workmanship for a period...