Winegard RC-DT09 - Manuals - manualsarea.com

Page 2 - SAFETY PRECAUTIONS; IMPORTANT SAFETY INSTRUCTIONS

- 2 - SAFETY PRECAUTIONS The lightning fl ash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to cause an electric shock. WARNING: TO REDUCE...

Page 4 - REMOTE CONTROL

- 4 - Battery Replacement When the batteries become weak, the operating distance of the remote control is greatly reduced and you will need to replace them. To Install Batteries 2. Insert two AAA batteries. • Point the remote control at the REMOTE SENSOR located on the unit.• When there is a strong ...

Page 5 - QUICK START GUIDE; Using the RF Cable to Connect a TV

- 5 - 1. Connect an antenna cable to the RF IN terminal on the rear of the unit. 2. Use the RF cable (included) to connect the unit and TV/Monitor. 3. Use the AC adapter (included) to connect a suitable wall outlet. The supplied 9V adapter operates on AC 120V ~ 60Hz. 4. Turn on your TV and follow th...

Page 6 - SEARCHING FOR CHANNELS AUTOMATICALLY

- 6 - STEP 2: TURNING ON THE UNIT 1. While the AC adapter is connected and the unit is on standby, power will be consumed and the power indicator is RED. 2. Press the STANDBY/ON button to turn on the unit. The power indicator is GREEN. 1. P r e s s t h e M E N U b u t t o n o n t h e r e m o t e con...

Page 7 - CONTROL REFERENCE GUIDE; Remote Control

- 7 - CONTROL REFERENCE GUIDE Remote Control 1) MUTE Button Press to turn off the sound. 2) MENU Button Press to display the on-screen menu or switch back to the previous menu screen. 3) CURSOR ( , , , ) Buttons Use to highlight selections on a menu screen and adjust certain settings. ENTER Button C...

Page 8 - Front View

- 8 - CONTROL REFERENCE GUIDE 1) Remote Sensor Receives infrared signals from the remote control. 2) CH-/CH+ Buttons Press to select the channel upward or downward. 3) Button Turns the power on or restores the unit to the standby mode. 4) STANDBY/ON Indicator Green: power on Red: standby mode 5) ANT...

Page 9 - CONNECTIONS

- 9 - CONNECTIONS Connecting a TV (Using the RF Cable) 1. Connect an antenna cable to the RF IN terminal on the rear of the unit. 2. Use the RF cable (included) to connect the unit and TV/Monitor as shown. Connecting a TV (Using the AV Cable) 1. Connect an antenna cable to the RF IN terminal on the ...

Page 10 - Using the AC Adapter; POWER SUPPLY; Turning on the Unit; Dolby Digital

- 10 - Using the AC Adapter The supplied 9V adapter operates on AC 120V ~ 60Hz. While the AC adapter is connected and the unit is on standby, power will be consumed and the power indicator is RED. Cautions: • The AC adapter included with this unit is for its use only. Do not use it with other equipm...

Page 11 - BASIC OPERATION; Adjusting the Volume

- 11 - BASIC OPERATION Adjusting the Volume You can control the volume using the buttons on the remote control. VOL-/VOL+ Buttons Use these buttons to increase or decrease the volume. MUTE Button This button is used to mute the sound of the unit. No audio will be heard once this button is pressed. T...

Page 12 - MENU

- 12 - Channel Edit 1. Press the MENU button on the remote control. 2. Use the / buttons to select the CHANNEL menu. 3. Use the button to select Channel Edit then press the ENTER button or the button. 4. Use the / buttons to select the channel number then press the ENTER button. ON-SCREEN MENU - CHA...

Page 13 - Output Channel

- 13 - ON-SCREEN MENU - OPTION Clock 1. Press the MENU button on the remote control. 2. Use the / buttons to select the OPTION menu. 3. Use the button to select Clock then press the ENTER button or the button. 4. Press the / buttons to select the Time Zone (Eastern/ C e n t ra l / M o u n t a i n / ...

Page 14 - Caption Select; Audio Language; Language

- 14 - ON-SCREEN MENU - OPTION 1. Press the MENU button on the remote control. 2. Use the / buttons to select the OPTION menu. 3. Use the button to select Caption Select then press the ENTER button or the button. 4. Use the / buttons to select the options (ACC/DCC/DCC Service). 5. Use the / buttons ...

Page 15 - Lock System

- 15 - ON-SCREEN MENU - OPTION DCC View 1. Press the MENU button on the remote control. 2. Use the / buttons to select the OPTION menu. 3. Use the button to select DCC View then press the ENTER button or the button. 4. Use the / buttons to select the options, then use the / buttons to make adjustmen...

Page 16 - Set Password; Block Channel

- 16 - 1. Press the MENU button on the remote control. 2. Use the / buttons to select the LOCK menu. 3. Use the / buttons to select TV Rating-General then press the ENTER button or the button. 4. Use the / buttons to select the options ( Age / Dialogue / Language / Sex / Violence) then press the ENT...

Page 18 - Cleaning the Unit; SYMPTOM

- 18 - TROUBLESHOOTING GUIDE MAINTENANCE Specifi cations and external appearance are subject to change without notice. Cleaning the Unit • Be sure to turn the unit off and disconnect the AC adapter before maintaining the unit.• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty...