Winegard MM-3003 - Manuals

Winegard MM-3003 – Manual in PDF format online.

Manuals:

Manual Winegard MM-3003

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 3 - FIGURE 4

3 MM-3003 Stop Collar 2 1 3 4 Pin FIGURE 4 STEP 3. Attach the MM-3084 (pipe that antennamounts on) to your truck/RV. If using the MM-3002clamp brackets, proceed to step 9. If using the MM-3003 clamp brackets, proceed to step 4. MM-3003 Assembly STEP 4. Disassemble pipe per number sequenceshown in Fi...

Page 5 - OPERATION; STEP 3. Connect coax from receiver to TV.; FIGURE 9; Pointer

5 OPERATION STEP 1. Set antenna onto pipe. See Figure 8. Makesure elevation clamp fits into keyway on pipe. Theantenna can be secured in place using a smallpadlock to prevent theft. STEP 2. Connect coax from LNBF to receiver. OptionalWinegard exterior cable/TV receptacle (WA-1024)available for easy ...

Page 6 - then wait 2; Make sure coax connections are good.; TWO YEAR LIMITED WARRANTY

6 N O T E : T h e m o s t c o m m o n p r o b l e m p e o p l eexperience is moving the antenna too fast. Youmust move the antenna VERY slowly so that the receiver can acquire and process the digital signal.This takes a few seconds so be patient. After thefirst couple of times of setting up the syst...

Winegard Manuals